UV LED curing machine curing light oil product effect real test

October 5, 2022 Longchang Chemical

UV LED curing machine curing light oil product effect real test

One, UV varnish (UV varnish) Introduction

1, UV varnish is a transparent coating, also called UV varnish by some people. Its role is to spray or roll coating on the surface of the substrate after the UV lamp (UVLED lamp) irradiation, so that it is instantly transformed from a liquid to a solid state.

2, UV varnish curing to achieve surface hardening, the main role to make it scratch-resistant role, and the surface looks glossy and shiny, beautiful and textured.

 

Second, the product characteristics of UV varnish

1, bright and beautiful, round texture, three-dimensional relief, short curing time, strong adhesion, with waterproof, sunlight resistance, strong compatibility, low odor, green, good matching, no bubbles, long service life, good mirror effect, fine film, wide range of use.

 

Three, UV varnish (UV varnish) application scenes

1, glass, metal, acrylic, plastic (BOPP, OPP, PET, PE, PP, ABS, PVC), light box cloth, wood panel, leather, wall cloth, mural, canvas, aluminum plastic plate, soft film, stone, ceramic, fiber and other materials.

2, cell phone case, display screen, porcelain bowl, tobacco and wine, cosmetics, health care products, food, drugs, daily necessities, cultural goods, audio and video products, backdrop, floor tiles, hardware, furniture, toys, handicrafts, etc.

 

Four, production process

1, production process: dust removal, UV varnish coating, UV curing.

2, UV varnish pre-treatment process: powder removal, corona treatment, priming oil, the main purpose is to make the printing on the UV varnish to achieve a flat, bright, strong adhesion.

 

Five, UV varnish curing common problems

Bad luster, brightness is not enough

1, UV oil viscosity is too small, the coating is too thin 2, ethanol and other non-reactive solvent dilution is excessive 3, uneven coating 4, paper absorption is too strong 5, coated anilox roller mesh is too thin, the amount of oil supply is not enough

Solution: According to the different circumstances of the paper appropriate to improve the viscosity of UV light oil and coating volume: absorbent paper can be coated with a layer of primer first.

 

Sixth, poor drying, curing is not complete, the surface is sticky

1, UV light intensity is not enough 2, UV lamp equipment aging, light intensity weakened 3, UV light oil storage time is too long 4, do not participate in the reaction of diluent added too much 5, the machine speed is too fast

Solution: In the case of curing speed less than 0.5s, generally should ensure that the power of high-pressure mercury lamp is not less than 120W / cm or UVLED lamp light intensity in 700mw / cm, if necessary, add a certain amount of UV light oil curing accelerator to accelerate drying.

Seven, the printed surface UV varnish coating does not go on, blossom

1, UV varnish viscosity is too small, the coating is too thin 2, ink in the ink transfer oil or dry oil content is too high 3, the ink surface has been crystallized 4, ink surface anti-adhesive materials (silicone oil, spray powder) too much 5, coated anilox roller mesh is too thin 6, the problem of the construction process (technical personnel technology is not in place)

Solutions: UV varnishing products required, printing should take appropriate measures to create certain conditions: UV varnish can be properly coated thicker, if necessary, on the primer or the use of special varnish formulations.

Eight, UV varnish coating with white spots and

1, coating and thin 2, coated anilox rollers are too fine 3, non-reactive thinner (such as ethanol) to add too much 4, the printed surface dust and other more impact

Solution: keep the production environment and the printed surface clean; increase the coating thickness; add a small amount of smoothing additives: weighing the releasing agent is best to participate in the reaction of the active diluent.

Nine, UV varnish coating uneven, streaks and orange peel phenomenon

1, UV light oil viscosity is too high 2, coated anilox roller mesh is too thick (too much coating), the surface is not smooth 3, uneven coating pressure 4, UV light oil leveling poor

Solution: Reduce the viscosity of the varnish, reduce the amount of coating; adjust the pressure evenly; coating rollers should be finely polished; add bright leveling agent.

Ten, UV varnish adhesion is not good

1, printing ink surface crystallization 2, printing ink in the additives are not suitable 3, UV light oil itself adhesion is not enough 4, light curing conditions are not suitable

Solution: The printing process should consider the varnishing conditions in advance; the primer to enhance adhesion should be applied to the printed product.

Eleven, UV varnish thickening, gel phenomenon

1, UV light oil storage time is too long 2, UV light oil is not completely protected from light storage 3, UV light oil storage temperature is high

Solution: Pay attention to the effective use period of UV light oil and store it strictly away from light, and the storage temperature should be 5~25℃.

Twelve, the residual odor is large

1, UV light oil curing is not complete 2, UV light is not enough or UV lamp aging 3, UV light oil poor oxygen interference resistance 4, UV light oil non-reactive diluent added too much.

Solution: UV light oil curing must be thorough, and to strengthen ventilation, if necessary, replace the light oil varieties.UV LED curing machine curing light oil product effect real test.

Monomer Same series products

Sinomer® TMPTA Trimethylolpropane triacrylate 15625-89-5
Sinomer® TMPTMA Trimethylolpropane trimethacrylate 3290-92-4
Sinomer® EO3-TMPTA Ethoxylated trimethylolpropane triacrylate 28961-43-5
Sinomer® DI-TMPTA DI(TRIMETHYLOLPROPANE) TETRAACRYLATE 94108-97-1
Sinomer® GPTA ( G3POTA ) GLYCERYL PROPOXY TRIACRYLATE 52408-84-1
Sinomer® TPGDA Tripropylene glycol diacrylate 42978-66-5
Sinomer® HDDA Hexamethylene diacrylate 13048-33-4
Sinomer® IBOA Isobornyl acrylate 5888-33-5
Sinomer® IBOMA Isobornyl methacrylate 7534-94-3
Sinomer® PEGDA Polyethylene Glycol Diacrylate 26570-48-9
Sinomer® PEGDMA Poly(ethylene glycol) dimethacrylate 25852-47-5
Sinomer® NPGDA Neopentyl glycol diacrylate 2223-82-7
Sinomer® PO2-NPGDA NEOPENTYL GLYCOL PROPOXYLATE DIACRYLATE 84170-74-1
Sinomer® TEGDMA Triethylene glycol dimethacrylate 109-16-0
Sinomer® PHEA 2-PHENOXYETHYL ACRYLATE 48145-04-6
Sinomer® PETA 3524-68-3
Sinomer® DPHA Dipentaerythritol hexaacrylate 29570-58-9
Sinomer® THFA Tetrahydrofurfuryl acrylate 2399-48-6
Sinomer® LMA Dodecyl 2-methylacrylate 142-90-5
Sinomer® IPAMA 2-isopropyl-2-adamantyl methacrylate 297156-50-4
Sinomer® EOEOEA 2-(2-Ethoxyethoxy)ethyl acrylate 7328-17-8
Sinomer® DCPEOA Dicyclopentenyloxyethyl Acrylate 65983-31-5

 

Photoinitiator Same series products

Product name CAS NO. Chemical name
Sinocure® TPO 75980-60-8 Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide
Sinocure® TPO-L 84434-11-7 Ethyl (2,4,6-trimethylbenzoyl) phenylphosphinate
Sinocure® 819/920 162881-26-7 Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide
Sinocure® ITX 5495-84-1 2-Isopropylthioxanthone
Sinocure® DETX 82799-44-8 2,4-Diethyl-9H-thioxanthen-9-one
Sinocure® BDK/651 24650-42-8 2,2-Dimethoxy-2-phenylacetophenone
Sinocure® 907 71868-10-5 2-Methyl-4′-(methylthio)-2-morpholinopropiophenone
Sinocure® 184 947-19-3 1-Hydroxycyclohexyl phenyl ketone
Sinocure®MBF 15206-55-0 Methyl benzoylformate
Sinocure®150 163702-01-0 Benzene, (1-methylethenyl)-, homopolymer,
ar-(2-hydroxy-2-methyl-1-oxopropyl) derivs
Sinocure®160 71868-15-0 Difunctional alpha hydroxy ketone
Sinocure® 1173 7473-98-5 2-Hydroxy-2-methylpropiophenone
Sinocure®EMK 90-93-7 4,4′-Bis(diethylamino) benzophenone
Sinocure® PBZ 2128-93-0 4-Benzoylbiphenyl
Sinocure®OMBB/MBB 606-28-0 Methyl 2-benzoylbenzoate
Sinocure® 784/FMT 125051-32-3 BIS(2,6-DIFLUORO-3-(1-HYDROPYRROL-1-YL)PHENYL)TITANOCENE
Sinocure® BP 119-61-9 Benzophenone
Sinocure®754 211510-16-6 Benzeneacetic acid, alpha-oxo-, Oxydi-2,1-ethanediyl ester
Sinocure®CBP 134-85-0 4-Chlorobenzophenone
Sinocure® MBP 134-84-9 4-Methylbenzophenone
Sinocure®EHA 21245-02-3 2-Ethylhexyl 4-dimethylaminobenzoate
Sinocure®DMB 2208-05-1 2-(Dimethylamino)ethyl benzoate
Sinocure®EDB 10287-53-3 Ethyl 4-dimethylaminobenzoate
Sinocure®250 344562-80-7 (4-Methylphenyl) [4-(2-methylpropyl)phenyl] iodonium
hexafluorophosphate
Sinocure® 369 119313-12-1 2-Benzyl-2-(dimethylamino)-4′-morpholinobutyrophenone
Sinocure® 379 119344-86-4 1-Butanone, 2-(dimethylamino)-2-(4-methylphenyl)methyl-1-4-(4-morpholinyl)phenyl-

Contact Us Now!

If you need COA, MSDS or TDS, please fill in your contact information in the form below, we will usually contact you within 24 hours. You could also email me info@longchangchemical.com during working hours ( 8:30 am to 6:00 pm UTC+8 Mon.~Sat. ) or use the website live chat to get prompt reply.

Contact US

English