How to mix the color of ink? What are the precautions?
Ink hue blending is an important job before printing, but also a very abstract work. Simple color three primary colors, yellow, magenta, cyan can be deployed to red, orange, yellow, green, green, blue, purple and dozens of colors. In the actual blending process, the three primary colors of ink alone can not obtain the color, this is due to the pigments and dyes selected by the ink manufacturer simply can not reach the international standard three primary colors of saturation, color concentration, brightness, etc., three equal parts of the primary colors of ink can only be added to the tea gray, not black. Therefore, in the actual color mixing process can not be separated from the black ink, white ink, watering down agent and other inks and additives.
01 Ink blending process
1.1. master the system, color, color saturation, viscosity, fineness and other indicators of the ink used.
1.2. To validate the sample sheet and customer requirements, process requirements, color requirements, ink use requirements, the arrangement of the color sequence of each color group, the number of product prints, the amount of ink, the deployment of the main colors, etc. to understand in depth.
1.3. Thinner and ink resin solubility, temperature deviation and the ratio of thinner is related, such as high temperature then the thinner should be slow-drying type. At the same time, the dissolution effect, volatilization speed of the product printing quality also plays a very important role, therefore, according to the relevant conditions to choose the appropriate diluent.
1.4. Before printing to do a good job of ink, thinner preparation.
1.5. In the short period of time to start overprinting, according to the color match, the appropriate use of the original color ink, and grasp the ratio, in accordance with the sample sheet for each color group of ink hue deployment, so that after the printing speed is stable, a slight adjustment can be achieved sample sheet effect. In normal printing, batch control of the same color phase, the ink blending staff is more difficult, such as the amount of thinner added will affect the color effect to varying degrees, which requires ink blending staff to have a strong sense of responsibility.
02 Ink blending precautions
2.1. In the case of color tone to meet the requirements, the fewer types of colors used in the ink is easier to deploy and control. Inter-color ink can be used, do not use multi-color ink, according to the subtractive color method, the more colors used in spot-color ink the lower the saturation, the black component will increase accordingly.
2.2. Confirm the main color of the print and the secondary colors contained, the main color ink as the basic ink, other ink as tonal ink, the basic ink as the main, tonal ink as a supplement, so that the deployment of spot-color ink will be faster and more accurate.
2.3. Deployment of proofing and small samples of ink, try to use the same paper used for printing, because the color of the ink will change with the difference in paper absorption and other factors. Only to maintain a stable paper quality, in order to avoid the color error caused by differences in paper.
2.4. With ordinary white cardboard playing small samples or scraping samples, the thickness of the ink layer will directly affect the color of the ink, the ink layer is thin, the color is light and bright. Field or network line, wet pressure wet or wet pressure dry, large or small amount of powder spray, the flatness and whiteness of the paper surface, the thickness of the ink layer and other differences will cause differences in color.
2.5. Tune spot-color ink, first of all, to adjust the saturated hue of the ink, playing a thin sample, to confirm that there is no lack of primary and secondary colors, and then use the watering down agent to the desired spot color.
2.6. The impact of spot-color ink color factors also include the printing process, water, ink control, speed and printing equipment, etc., should grasp the printing and its laws to ensure product quality.
Mastering spot-color ink blending, ink dosage control, the full use of leftover ink, etc., not only to save materials, and personal technical level will have a corresponding improvement. An excellent ink blender, the development of new ink, color innovation, ink cost reduction plays a very important role.
UV INK raw materials : 紫外线单体 同系列产品
| 聚硫醇/聚硫醇 | ||
| DMES 单体 | 双（2-巯基乙基）硫醚 | 3570-55-6 |
| DMPT 单体 | THIOCURE DMPT | 131538-00-6 |
| PETMP 单体 | 季戊四醇四(3-巯基丙酸酯) | 7575-23-7 |
| PM839 单体 | 聚氧（甲基-1,2-乙二基） | 72244-98-5 |
| 单官能团单体 | ||
| HEMA 单体 | 甲基丙烯酸 2-羟乙基酯 | 868-77-9 |
| HPMA 单体 | 甲基丙烯酸羟丙酯 | 27813-02-1 |
| THFA 单体 | 丙烯酸四氢糠酯 | 2399-48-6 |
| HDCPA 单体 | 氢化双环戊烯丙烯酸酯 | 79637-74-4 |
| DCPMA 单体 | 甲基丙烯酸二氢双环戊二烯酯 | 30798-39-1 |
| DCPA 单体 | 丙烯酸二氢双环戊二烯酯 | 12542-30-2 |
| 二氯丙烯酰亚胺单体 | 甲基丙烯酸二环戊氧基乙酯 | 68586-19-6 |
| DCPEOA 单体 | 丙烯酸二环戊烯基氧基乙基酯 | 65983-31-5 |
| NP-4EA 单体 | (4) 乙氧基化壬基酚 | 50974-47-5 |
| LA 单体 | 丙烯酸十二烷基酯/丙烯酸十二烷基酯 | 2156-97-0 |
| THFMA 单体 | 甲基丙烯酸四氢糠酯 | 2455-24-5 |
| PHEA 单体 | 2-苯氧基乙基丙烯酸酯 | 48145-04-6 |
| LMA 单体 | 甲基丙烯酸月桂酯 | 142-90-5 |
| IDA 单体 | 丙烯酸异癸酯 | 1330-61-6 |
| IBOMA 单体 | 甲基丙烯酸异冰片酯 | 7534-94-3 |
| IBOA 单体 | 丙烯酸异冰片酯 | 5888-33-5 |
| EOEOEA 单体 | 2-(2-乙氧基乙氧基)丙烯酸乙酯 | 7328-17-8 |
| 多功能单体 | ||
| DPHA 单体 | 双季戊四醇六丙烯酸酯 | 29570-58-9 |
| DI-TMPTA 单体 | 二（三羟甲基丙烷）四丙烯酸酯 | 94108-97-1 |
| 丙烯酰胺单体 | ||
| ACMO 单体 | 4-丙烯酰基吗啉 | 5117-12-4 |
| 双功能单体 | ||
| PEGDMA 单体 | 聚乙二醇二甲基丙烯酸酯 | 25852-47-5 |
| TPGDA 单体 | 三丙二醇二丙烯酸酯 | 42978-66-5 |
| TEGDMA 单体 | 三乙二醇二甲基丙烯酸酯 | 109-16-0 |
| PO2-NPGDA 单体 | 丙氧基新戊二醇二丙烯酸酯 | 84170-74-1 |
| PEGDA 单体 | 聚乙二醇二丙烯酸酯 | 26570-48-9 |
| PDDA 单体 | 邻苯二甲酸二乙二醇二丙烯酸酯 | |
| NPGDA 单体 | 新戊二醇二丙烯酸酯 | 2223-82-7 |
| HDDA 单体 | 二丙烯酸六亚甲基酯 | 13048-33-4 |
| EO4-BPADA 单体 | 乙氧基化 (4) 双酚 A 二丙烯酸酯 | 64401-02-1 |
| EO10-BPADA 单体 | 乙氧基化 (10) 双酚 A 二丙烯酸酯 | 64401-02-1 |
| EGDMA 单体 | 乙二醇二甲基丙烯酸酯 | 97-90-5 |
| DPGDA 单体 | 二丙二醇二烯酸酯 | 57472-68-1 |
| 双-GMA 单体 | 双酚 A 甲基丙烯酸缩水甘油酯 | 1565-94-2 |
| 三官能单体 | ||
| TMPTMA 单体 | 三羟甲基丙烷三甲基丙烯酸酯 | 3290-92-4 |
| TMPTA 单体 | 三羟甲基丙烷三丙烯酸酯 | 15625-89-5 |
| PETA 单体 | 季戊四醇三丙烯酸酯 | 3524-68-3 |
| GPTA ( G3POTA ) 单体 | 丙氧基三丙烯酸甘油酯 | 52408-84-1 |
| EO3-TMPTA 单体 | 三羟甲基丙烷三丙烯酸乙氧基化物 | 28961-43-5 |
| 光阻单体 | ||
| IPAMA 单体 | 2-异丙基-2-金刚烷基甲基丙烯酸酯 | 297156-50-4 |
| ECPMA 单体 | 1-乙基环戊基甲基丙烯酸酯 | 266308-58-1 |
| ADAMA 单体 | 1-金刚烷基甲基丙烯酸酯 | 16887-36-8 |
| 甲基丙烯酸酯单体 | ||
| TBAEMA 单体 | 2-(叔丁基氨基)乙基甲基丙烯酸酯 | 3775-90-4 |
| NBMA 单体 | 甲基丙烯酸正丁酯 | 97-88-1 |
| MEMA 单体 | 甲基丙烯酸 2-甲氧基乙酯 | 6976-93-8 |
| i-BMA 单体 | 甲基丙烯酸异丁酯 | 97-86-9 |
| EHMA 单体 | 甲基丙烯酸 2-乙基己酯 | 688-84-6 |
| EGDMP 单体 | 乙二醇双(3-巯基丙酸酯) | 22504-50-3 |
| EEMA 单体 | 2-甲基丙-2-烯酸 2-乙氧基乙酯 | 2370-63-0 |
| DMAEMA 单体 | 甲基丙烯酸 N,M-二甲基氨基乙酯 | 2867-47-2 |
| DEAM 单体 | 甲基丙烯酸二乙氨基乙酯 | 105-16-8 |
| CHMA 单体 | 甲基丙烯酸环己基酯 | 101-43-9 |
| BZMA 单体 | 甲基丙烯酸苄酯 | 2495-37-6 |
| BDDMP 单体 | 1,4-丁二醇二（3-巯基丙酸酯） | 92140-97-1 |
| BDDMA 单体 | 1,4-丁二醇二甲基丙烯酸酯 | 2082-81-7 |
| AMA 单体 | 甲基丙烯酸烯丙酯 | 96-05-9 |
| AAEM 单体 | 甲基丙烯酸乙酰乙酰氧基乙基酯 | 21282-97-3 |
| 丙烯酸酯单体 | ||
| IBA 单体 | 丙烯酸异丁酯 | 106-63-8 |
| EMA 单体 | 甲基丙烯酸乙酯 | 97-63-2 |
| DMAEA 单体 | 丙烯酸二甲胺基乙酯 | 2439-35-2 |
| DEAEA 单体 | 2-(二乙基氨基)乙基丙-2-烯酸酯 | 2426-54-2 |
| CHA 单体 | 丙-2-烯酸环己基酯 | 3066-71-5 |
| BZA 单体 | 丙-2-烯酸苄酯 | 2495-35-4 |