Apa yang dimaksud dengan tinta penahan solder UV? Bagaimana cara memilih inisiator foto yang sesuai?
Quick answer: For practical formulation work, photoinitiator screening starts with the light source and film build, then checks yellowing, adhesion, and cure completeness under real production conditions.
Papan sirkuit tercetak pada sirkuit tembaga yang dibuat, permukaan papan selain sambungan solder, sisa papan perlu menutupi lapisan penahan solder untuk memastikan bahwa papan melalui gelombang penyolderan, hanya sambungan solder pada solder, sisa bagian grafik garis tidak ternoda dengan solder. Dalam metode sablon pada penahan solder digunakan tinta penahan solder. Karena metode pengawetan yang berbeda, tinta penahan solder juga memiliki dua jenis heat-set dan light-set, saat ini, terutama dengan tinta penahan solder light-set. Grafik penahan solder juga dibentuk oleh tinta melalui pencetakan kebocoran layar setelah pengawetan, karena merupakan lapisan permanen pada papan sirkuit tercetak, sehingga memiliki sifat kelistrikan dan sifat mekanik fisik yang sangat baik, tetapi juga dapat menahan suhu tinggi 260 ℃ (produk militer untuk menahan suhu tinggi 288).
Oligomer tinta penahan solder UV terutama memilih ketahanan panas yang baik, insulasi yang baik, daya rekat yang baik dengan resin tembaga, seperti bisphenol A - epoksi akrilat, fenolik epoksi akrilat dan poliuretan akrilat, yang saat ini umum digunakan adalah fenolik epoksi akrilat. Pengencer reaktif adalah akrilat polifungsional dengan ester hidroksil monofungsional, inisiator foto terutama digunakan 907 atau DETX. pigmen sebelumnya terutama berwarna hijau ftalosianin, tetapi sekarang pigmen pewarna memiliki pilihan hitam, emas dan lainnya, dan dapat menambahkan lebih banyak pengisi, yang bermanfaat untuk meningkatkan ketahanan panas dan mengurangi penyusutan volume. Untuk meningkatkan daya rekat tinta dan tembaga, Anda juga perlu menambahkan sedikit promotor daya rekat, seperti fosfor metakrilat mono atau di-ester.
Apabila menyiapkan tinta penolak solder UV, photoinitiator harus dipilih secara cermat. Selain 907 dan DETX yang disebutkan di atas, 784 dan 369 yang tersebar luas, juga cocok untuk sistem ini.
Inisiator Foto UV Produk seri yang sama
A practical selection route for photoinitiator-related projects
When technical buyers or formulators screen photoinitiators, the most useful decision frame is usually cure quality plus application fit: which package cures reliably, keeps appearance acceptable, and still works under the lamp, film thickness, and substrate conditions of the actual process.
- Match the package to the lamp first: mercury lamps, UV LEDs, and visible-light systems can rank the same photoinitiators very differently.
- Check depth cure and surface cure separately: a film that feels dry on top can still be weak underneath.
- Balance yellowing with reactivity: the strongest deep-cure route is not always the best commercial choice if color or migration risk becomes unacceptable.
- Use the final formula as the benchmark: pigment load, monomer package, and film thickness can all change the apparent ranking of the same initiator.
Recommended product references
- CHLUMINIT 819: Useful when a formulation needs stronger absorption and deeper cure support.
- CHLUMINIT 1173: A practical comparison point for classic short-wave UV initiation.
- CHLUMINIT ITX: A useful long-wave support route in many printing-ink packages.
- CHLUMINIT CQ: A direct reference for visible-light and color-sensitive curing discussions.
FAQ for buyers and formulators
Why are blended photoinitiator packages so common?
Because one product may control yellowing or lamp fit well while another improves cure depth or line-speed performance, so the full package is often stronger than any single grade.
Should incomplete cure always be solved by adding more initiator?
Not automatically. The real limitation may be the lamp, film thickness, pigment shading, or the rest of the reactive system rather than simple under-dosage.