Pemrakarsa foto 6993 CAS 71449-78-0

6993 is a cationic photoinitiator,The triarylsulfonium salt photoinitiator has high photoinitiation activity because the sulfur atom can be partially conjugated with three aromatic rings, and the positive charge is dispersed. After light excitation, it can undergo cleavage to produce polymerization active species; it has good absorption at 365nm; It has the characteristics of fast curing speed, good surface drying, no yellowing, no migration, and no smell.

Deskripsi

Pemrakarsa foto 6993

Sinonim:UV Cationic Photoinitiator 6993;UVI-6993;UVI-6976 powder; Mixed type triarylsulfonium hexafluoroantimonate salts

CAS NO:71449-78-0

Standar: Standar

Penampilan Bedak putih pucat
Konten Padat 99% min
Berat Kering 1% maks


Spektrum Penyerapan UV:

Aplikasi:

1. Photoinitiator 6993: This photoinitiator excels at curing alicyclic epoxy resins such as Sinepoxy CER-421 and Sinepoxy CER-4299. It is perfectly matched to these alicyclic epoxy resins and enables efficient curing processes. In addition, it also has excellent curing effects on vinyl ethers and other cationic curing materials. From a historical perspective, the emergence and application of photoinitiators was a major innovation in material curing technology. In the past, the curing process of many materials was cumbersome and time-consuming, but the advent of photoinitiators greatly shortened this process, improved production efficiency, and promoted the rapid development of related industries.

2. A deeper analysis shows that in the application scenario of transparent coatings, the content of photoinitiator 6993 in the starting formulation is extremely critical. Its content is specified in the range of 1.5-3.0% (by weight). This figure was not set arbitrarily, but was determined through extensive experimentation and practical application. For example, in the early stages of product development, the content of photoinitiator 6993 was increased to 5%, but this was found to have caused an imbalance in some of the coating’s properties, such as an increase in hardness and a significant decrease in toughness, making the coating more prone to cracking when impacted by external forces. Conversely, if the content is too low, for example below 1%, the curing effect is not good, and the desired coating strength and stability requirements cannot be met. Therefore, the content range of 1.5-3.0% is the optimal range obtained after comprehensive consideration of the various performance indicators of the coating, which can ensure that the transparent coating has a good curing effect while maintaining balanced physical properties.

3. Let’s explore a new hypothetical scenario. Suppose that in the future, a special project requires the use of materials with a transparent coating and photoinitiator 6993 curing in an extremely harsh environment, such as deep-sea high pressure, strong corrosion, or high radiation and temperature changes in space. Then, would the existing 1.5 – 3.0% photoinitiator 6993 content range still meet the requirements? This requires further research and adjustment. Perhaps in the deep-sea environment, due to the high pressure and high corrosiveness of the seawater, the content of photoinitiator 6993 needs to be appropriately increased to enhance the curing strength and corrosion resistance of the coating, but at the same time, other performance issues that may be caused by too high a content, such as the previously mentioned decrease in toughness, need to be considered. In the space environment, in the face of high radiation and drastic temperature changes, it may be necessary to develop a new formulation system that can ensure the effective curing of photoinitiator 6993 while adding some special radiation-resistant and temperature-regulating materials that work synergistically with the existing ingredients to meet the requirements for use in the space environment.

PPengemasan dan Pengiriman:

Pengepakan: 25kgs hingga 200kgs / drum.

Pengiriman: dalam 5-7 hari kerja.

Penyimpanan:

Disimpan di tempat kering yang sejuk dan terhindar dari sinar matahari langsung.

Hubungi Kami Sekarang!

Jika Anda membutuhkan Harga, silakan isi informasi kontak Anda di formulir di bawah ini, kami biasanya akan menghubungi Anda dalam waktu 24 jam. Anda juga bisa mengirim email kepada saya sale01@longchangchemical.com selama jam kerja (8:30 pagi hingga 6:00 sore UTC+8 Senin-Sabtu) atau gunakan obrolan langsung situs web untuk mendapatkan balasan secepatnya.

 

TPO pemrakarsa foto CAS 75980-60-8
Pemrakarsa foto TMO CAS 270586-78-2
Pemrakarsa foto PD-01 CAS 579-07-7
Pemrakarsa foto PBZ CAS 2128-93-0
Pemrakarsa foto OXE-02 CAS 478556-66-0
Pemrakarsa foto OMBB CAS 606-28-0
Pemrakarsa foto MPBZ (6012) CAS 86428-83-3
Pemrakarsa foto MBP CAS 134-84-9
Pemrakarsa foto MBF CAS 15206-55-0
PAPAN inisiator foto CAS 85073-19-4
Pemrakarsa foto ITX CAS 5495-84-1
Pemrakarsa foto EMK CAS 90-93-7
Pemrakarsa foto EHA CAS 21245-02-3
Pemrakarsa foto EDB CAS 10287-53-3
Pemrakarsa foto DETX CAS 82799-44-8
Pemrakarsa foto CQ / Kamperquinon CAS 10373-78-1
Pemrakarsa foto CBP CAS 134-85-0
Pemrakarsa foto BP / Benzofenon CAS 119-61-9
BMS inisiator foto CAS 83846-85-9
Pemrakarsa foto 938 CAS 61358-25-6
Pemrakarsa foto 937 CAS 71786-70-4
Pemrakarsa foto 819 DW CAS 162881-26-7
Pemrakarsa Foto 819 CAS 162881-26-7
Pemrakarsa foto 784 CAS 125051-32-3
Pemrakarsa foto 754 CAS 211510-16-6 442536-99-4
Pemrakarsa foto 6993 CAS 71449-78-0
Pemrakarsa foto 6976 CAS 71449-78-0 89452-37-9 108-32-7
Pemrakarsa foto 379 CAS 119344-86-4
Pemrakarsa foto 369 CAS 119313-12-1
Pemrakarsa Foto 160 CAS 71868-15-0
Pemrakarsa Foto 1206
Pemrakarsa foto 1173 CAS 7473-98-5

 

Informasi tambahan

Nama Kimia

4-Thiophenyl phenyl diphenyl sulfonium hexafluoroantimonate

CAS No.

71449-78-0

Rumus Molekul

C24H19S2.SbF6

Pengujian

99% min

Paket

25kgs/drum;200kgs/drum

Ulasan

Belum ada ulasan.

Jadilah yang pertama mengulas "Photoinitiator 6993 CAS 71449-78-0"

Hubungi kami

Indonesian