빠른 답변: buyers should not treat every print-side silicone additive as the same decision. 클루미아그® 3501 belongs earlier when the project needs a route already positioned for printing inks, inkjet inks, screen printing inks, overprint varnishes, release coatings, and anti-sticking agents. 클루미아그® 3565 belongs earlier when the buyer wants a UV, 용매 및 수성 route that is water-dispersible and oil-soluble, but can manage the stated pinhole-risk watchpoint and the requirement to add it 경화제 전에. 클루미페® 1206 belongs earlier when the real first job is solvent-side lubrication, release, anti-sticking, and wear resistance, especially around gravure and flexographic inks or other solvent-side packaging-coating work.
This is the commercially useful split. The first buying question is not just “which additive gives more slip?” It is whether the project needs application-matched print compatibility, cross-system anti-sticking flexibility또는 more solvent-side lubrication and wear route.
이 페이지가 CHLUMICRYL® 관련 페이지들과 함께 존재해야 하는 이유
롱창은 이미 라이브 페이지를 운영하고 있습니다. 클로미크릴® 코팅 및 잉크 첨가제, 미끄럼 방지 첨가제, 이형 코팅 첨가제 선택, 그리고 slip, mar resistance, and printability. Those pages help buyers choose the broad additive family or the larger tradeoff.
This page answers a narrower print-side question: if the job already sits in printing inks, packaging coatings, inkjet inks, screen inks, or solvent-side varnish handling, which product route should start the first shortlist?
That narrower question is worth its own page because print-side formulation work often collapses several different KPIs into one vague word like “slip” or “surface control.” In practice, buyers are usually separating three different first-screen jobs:
- application compatibility across print and varnish systems,
- anti-sticking or peeling help across multiple system types, 그리고
- solvent-side lubrication, release, and wear handling.
What the current company-supported facts actually separate
The current Longchang product pages already give a meaningful split:
- 클루미아그® 3501 is described as an 아크릴 변성 실리콘 오일. The public application table places it in printing inks, inkjet inks, screen printing inks, overprint varnishes, release coatings, and anti-sticking-agent use. The page also allows addition at any stage and lists UV, 용매 및 수성 applicability.
- 클루미아그® 3565 다음과 같이 묘사됩니다. 폴리에테르 변성 폴리실록산. The page gives a 0.05% ~ 1% recommended dosage, states that it is water-dispersible and oil-soluble, says to add it before the curing agent, 지원합니다 UV, 용매 및 수성 systems, and explicitly warns that it 미세한 구멍이 생길 수 있습니다..
- 클루미페® 1206 다음과 같이 묘사됩니다. long-chain alkyl-modified polydimethylsiloxane 즉 mixingly soluble in mineral oil in any proportion롱창은 이를 다음과 같이 지원합니다. lubricity, oil solubility, wear resistance, defoaming, and anti-sticking, and also says that a small amount can improve smoothness, wear resistance, anti-adhesion, release, anti-graffiti behavior, and water-repellency of the cured film. The page specifically lists use in solvent-based gravure and flexographic inks, as well as high-solids, protective, wood, furniture, and UV-cured coating systems.
That is enough differentiation to justify a dedicated comparison page for print-side buyers.
Quick comparison table: CHLUMIAG® 3501 vs 3565 vs CHLUMIFE® 1206
| 구매 요인 | 클루미아그® 3501 | 클루미아그® 3565 | 클루미페® 1206 |
|---|---|---|---|
| Main public role | Application-matched route for printing inks, inkjet inks, screen printing inks, OPV, release coatings, and anti-sticking agents | Cross-system organosilicon surfactant, leveling, anti-sticking, and peeling-aid route | Solvent-side lubrication, wear-resistance, anti-sticking, and release route |
| System fit on current company page | UV √, 용매 √, 수성 √ | UV √, 용매 √, 수성 √ | UV and solvent systems are the practical supported route on the current page |
| Best first reason to shortlist | Print-side application compatibility is already explicit | Buyer wants water-dispersible or oil-soluble flexibility but can manage defect risk | Buyer needs lubrication, release, and wear support in solvent-side printing or packaging systems |
| 권장 복용량 | Use per current process screen; any-stage addition is supported | 0.05% to 1% recommended, with broader 0.02% to 3% dosing language on page | 0.1% ~ 1.0% |
| Addition note | Can be added at any stage or later | 경화제를 넣기 전에 넣고 완전히 저어주세요. | Add near the end of formulation; solvent pre-dilution is allowed |
| 주요 감시 지점 | Store sealed and light-protected; mix with caution alongside other additives | May cause pinholes, so testing is required before industrial production | Excessive use may affect recoating, and anti-sticking can weaken in highly polar systems |
When CHLUMIAG® 3501 is the better first route
3501 should move up first when the commercial problem is already anchored in print-side application fit. The strongest reason is direct company-supported language. Longchang’s public application scenarios already place 3501 in 인쇄 잉크, 잉크젯 잉크, 스크린 인쇄 잉크, 오버프린트 바니시, 이형 코팅, 그리고 점착 방지제.
That matters because many buyers are not starting from a blank chemistry map. They already know the project lives in a print-side family, and they want a product whose public positioning already matches that family.
3501 should move earlier when:
- the team is screening a route across printing inks, inkjet inks, or screen inks,
- overprint varnish or release-coating compatibility matters alongside ink performance,
- the buyer wants a route that can be 어떤 단계에서든 추가됨 instead of depending on a stricter addition sequence, or
- the first internal approval question is “which additive already matches our printing application list?”
The tradeoff is that 3501 wins mainly because its application compatibility is explicit. Buyers should still define whether the first KPI is wetting, anti-sticking, printability balance, release, or downstream rub handling, instead of assuming one application label solves every formulation conflict.
When CHLUMIAG® 3565 is the better first route
3565 belongs earlier when the buyer wants a route with broader handling flexibility across different formulation environments. Longchang supports it for UV, 용매 및 수성 시스템, says it is water-dispersible and oil-soluble, and allows dilution in alkanes and aromatics in any ratio. That makes it attractive when one plant or group is trying to screen across more than one system boundary.
3565 should move earlier when:
- the shortlist needs one route that can travel across UV, 용매 및 수성 work,
- the project needs an anti-sticking or peeling-aid angle rather than only a printing-compatibility label,
- the team is comfortable with a stricter 경화제 전에 첨가 process rule, or
- the buyer wants a route that can move between oil-side and water-side handling without immediately changing product families.
The tradeoff is not minor. Longchang explicitly warns that 3565 미세한 구멍이 생길 수 있습니다.. That means this is not the lazy safe default. It is a useful route when the added flexibility matters enough to justify stricter defect screening.
When CHLUMIFE® 1206 is the better first route
1206 should move first when the buyer’s real first KPI is solvent-side lubrication, release, anti-adhesion, and wear handling, especially in printing or packaging systems where the cured or dried surface still needs better movement and lower damage. Longchang’s public product page is unusually clear here. It says the product is mixingly soluble in mineral oil in any proportion, 제공합니다 탁월한 윤활성, 내마모성, 거품 제거, 그리고 달라붙지 않음, and improves 풀어 주다 및 water repellency when used in small amounts.
It also directly lists use in solvent-based gravure and flexographic inks, which makes 1206 the strongest of these three when the project is not only about general print compatibility but about solvent-side press handling and finished-surface movement.
1206 should move earlier when:
- 선은 분명히 gravure, flexographic, or other solvent-side printing work,
- lubricity and release matter more than cross-system flexibility,
- the buyer wants stronger support around wear resistance and anti-adhesion, 또는
- the team is comfortable adding the product near the end of formulation and, when helpful, using solvent pre-dilution.
The watchpoint is practical. Longchang notes that excessive use may affect 재코팅, and in highly polar systems the anti-sticking effect may weaken. That means 1206 is strongest when the project genuinely belongs in a solvent-side lubrication route, not when the system is mainly a water-based or compatibility-first screen.
구매자가 샘플을 요청하기 전에 선택해야 할 사항
1. Start with print-system boundary, not with a generic slip label
If the project brief is already centered on printing inks, inkjet inks, screen inks, or OPV, 3501 often deserves the first look because the application fit is already explicit. If the project is more about cross-system anti-sticking flexibility, 3565 moves up. If it is clearly solvent-side gravure or flexo handling, 1206 becomes harder to ignore.
2. Separate flexibility from process discipline
3565 can cover more handling scenarios, but it also brings a stricter addition rule and a pinhole watchpoint. That makes it useful, but not automatically convenient.
3. Keep lubrication and release separate from broad print compatibility
3501 is strong because it already sits in the right printing application cluster. 1206 is strong because it directly addresses lubricity, release, and wear. Those are not the same buying trigger.
4. Do not ignore the addition sequence
For some plants, the difference between any-stage addition 및 add before the curing agent is not a minor detail. It changes how easy the first production trial is.
5. 첫 번째 실험 과정은 짧게 진행하세요.
For many print-side projects, the cleanest first round is one 3501-led application-compatibility route, 하나 3565-led flexibility route그리고 하나 1206-led solvent-side lubrication route. That usually gives a clearer commercial answer than testing too many nearby additives at once.
이 페이지에서 추천하는 롱창 코스
- Printing-ink and OPV compatibility route: 클루미아그® 3501
- Cross-system anti-sticking route: 클루미아그® 3565
- Solvent-side lubrication and wear route: 클루미페® 1206
- 클러스터 개요: 클로미크릴® 코팅 및 잉크 첨가제
- Related print tradeoff page: Slip, Mar Resistance, and Printability
- 관련 애플리케이션 페이지: Release Coating Additives for UV Inks and Overprint Varnishes
- 관련 기능 페이지: 코팅 및 잉크용 슬립 첨가제 선택 방법
자주 묻는 질문
Which additive is the best first screen for printing inks or inkjet inks?
Usually CHLUMIAG® 3501, because Longchang already places it directly in printing inks, inkjet inks, screen printing inks, overprint varnishes, release coatings, and anti-sticking-agent use.
When should buyers choose 3565 before 3501?
Choose 3565 earlier when the project needs a route that can move across UV, solvent, and water-based work and the team can control the add-before-curing-agent rule and the stated pinhole-risk watchpoint.
When is 1206 the better route than 3501 or 3565?
1206 is stronger when the real need is solvent-side lubricity, release, anti-adhesion, and wear resistance, especially for gravure or flexographic inks and related packaging-coating work.
이 세 제품은 서로 호환되나요?
No. Their public company-supported positioning is different enough that buyers should not treat them as drop-in substitutes. One leads with print-side application compatibility, one with cross-system anti-sticking flexibility, and one with solvent-side lubrication and release performance.
Need a tighter print-side shortlist?
If your printing-ink or packaging-coating project is being slowed by sticking, poor release, weak press-side handling, or uncertainty between print compatibility and lubrication needs, start by deciding whether the first problem is application fit, cross-system flexibility, 또는 solvent-side lubrication and wear. That usually narrows the first sample round much faster than treating every silicone additive as the same surface-control decision.