빠른 답변: 구매자 비교 CHLUMIFE® 3482 / 3482X, 클루미아그® 3501, 그리고 CHLUMIFE® 3166 should not treat them as three versions of the same anti-sticking additive. 3482X should move first when the project is clearly 수성 and the main job is lower coefficient of friction, anti-sticking, slip feel, or abrasion handling on the finished film. 3501 deserves earlier review when the buyer needs a broader anti-sticking and downstream handling route that can sit across coatings, printing inks, inkjet inks, overprint varnishes, and release-coating-adjacent work. 3166 becomes the better first route when the visible film still needs a broader dry feel, smoothness, gloss, leveling, and anti-blocking balance instead of a narrower friction-first or handling-first answer.
That is the useful split. This page is not another broad slip-additive overview and not a duplicate of the live water-based anti-sticking application pages. It is a tighter buyer-comparison page for teams already inside the CHLUMICRYL® coating-and-ink-additives branch and trying to decide which of these three routes deserves the first lab round.
이 비교를 위한 별도의 페이지가 필요한 이유
롱창은 이미 더 광범위한 라이브 페이지를 보유하고 있습니다. 막힘 방지 첨가제, 미끄럼 방지 첨가제, furniture coating additives, waterborne topcoat additives, 그리고 wood varnish additives. Those pages answer broader function or application questions first.
This page answers a narrower next question: what if the shortlist is no longer about whether anti-sticking matters, but about which anti-sticking route fits the real formulation boundary best? In practice, buyers often reach one of three different needs:
- a water-based low-friction route that is explicitly tied to preventing sticking and improving slip,
- a broader handling-compatibility route that lives naturally across inks, OPV, release-oriented surfaces, and anti-sticking use, or
- a 보다 폭넓은 건조한 느낌과 외관 균형 유지 방식 where anti-blocking matters, but it is not the only KPI.
That is a different buying problem from a generic anti-blocking page. It deserves its own comparison because the system window, addition logic, and watchpoints are not the same.
What the current company-supported facts actually separate
- CHLUMIFE® 3482 / 3482X 롱창은 이를 다음과 같이 포지셔닝합니다. 유기 실리콘 미끄럼 방지 및 내마모성 첨가제, a 수성 코팅제그리고 수성 잉크 촉감 개선제. The current product page says it can 마찰 계수를 크게 줄입니다, 달라붙지 않도록 방지그리고 개선합니다 미끄러운 느낌 및 내마모성. Longchang also marks it as 수성 시스템만 해당권장 복용량은 다음과 같습니다. 0.05% ~ 1.0%, a staged water-dilution method before addition, and practical warnings around 핀홀 위험, freezing protection, 그리고 avoiding alcohol-solvent mixing.
- 클루미아그® 3501 is the broader anti-sticking and handling route. Longchang directly lists it for 인쇄 잉크, 잉크젯 잉크, 스크린 인쇄 잉크, 오버프린트 바니시, 이형 코팅, 그리고 anti-sticking-agent use. The current public page also supports use across UV, 용제, 그리고 수계 시스템, and says it can be added at any stage 또는 그 이후.
- CHLUMIFE® 3166 is the broader dry-feel and surface-balance route. Longchang positions it around 탁월한 건조감, 기판 습윤성, 표면 평활도, 긁힘 방지, 안티블로킹, 수준 측량, 그리고 광택 개선, with supported fit across UV, 용제, 그리고 수계 시스템. The same company-supported route also carries real watchpoints: it may cause 핀홀 또는 호분 and may stabilize foam, so testing discipline matters.
That is enough company-supported separation to justify a real buyer-selection page without inventing unsupported product facts. External industry framing is used only conservatively around the familiar split between low friction, downstream handling behavior, 그리고 broader tactile or appearance cleanup.
간략 비교표: 어떤 경로가 먼저 화면에 나와야 할까요?
| 구매자 우선권 | 3482X | 3501 | 3166 |
|---|---|---|---|
| 메인 첫 화면 작업 | Water-based anti-sticking and lower-friction control | Broader anti-sticking, release-oriented handling, and downstream compatibility | Dry feel, smoothness, gloss, leveling, and anti-blocking balance |
| 지원되는 시스템 창 | 수성 제품만 해당 | UV, 용매 및 수성 | UV, 용매 및 수성 |
| Strongest supported reason to shortlist | Lower coefficient of friction, prevent sticking, improve slip and abrasion handling | Direct scope across printing inks, inkjet inks, OPV, release coatings, and anti-sticking use | Broader surface-performance package instead of only a friction-first route |
| Suggested dosage on current public page | 0.05% ~ 1.0% | Current public summary in this workflow is clearer on stage flexibility than on a singled-out dosage band | 0.05% ~ 1.0% |
| 덧셈 논리 | Pre-dilute with small batches of water, then add | Any stage or later | Can be added during production, with testing for pinhole and foam behavior |
| 주요 감시 지점 | Water-based only, no alcohol-solvent mixing, possible pinholes, protect from freezing | Do not treat it as a substitute for a true low-friction or dry-feel-first decision when those are the real bottlenecks | Pinhole, whitening, and foam-stabilization risk need early screening |
When CHLUMIFE® 3482X is the better first move
3482X should move first when the buyer already knows the project is 수성 and the complaint shows up on the 완성된 영화 as sticking, drag, high friction, or weak slip feel. This is the cleaner first route when the team is not trying to solve a broad appearance problem, but a narrower water-based anti-sticking and handling problem.
The current Longchang page gives 3482X unusually explicit support for that role. It is positioned as a 수성 코팅제 및 수성 잉크 촉감 개선제해당 페이지에는 또한 가능하다고 나와 있습니다. 마찰 계수를 크게 줄입니다, 달라붙지 않도록 방지그리고 개선합니다 미끄러운 느낌 및 내마모성.
3482X should move up first when:
- 선은 분명히 수성 and not a broad cross-system screen,
- the buyer is trying to lower friction instead of mainly changing gloss or leveling,
- stacking, sliding, or post-cure handling still feels too sticky, or
- the lab wants a route explicitly tied to water-based anti-sticking behavior instead of a broader multifunction package.
The watchpoints are operationally important, not minor footnotes. Longchang says the product should first be 소량의 물로 여러 번에 나누어 희석합니다., should not be mixed with alcohol solvents, must be 동결로부터 보호됨, and may cause 핀홀. That means 3482X is the stronger first route when the plant can respect those boundaries and wants a direct answer on water-based low-friction control.
When CHLUMIAG® 3501 is the better first move
3501 deserves earlier review when the buyer needs a route that is broader than a water-based friction additive. This is the stronger option when the real problem sits in downstream handling compatibility, anti-sticking behavior across different coating or ink windows, 또는 방출 지향적 표면 거동 rather than only coefficient-of-friction reduction inside a water-based coating.
The current Longchang page is clear on why 3501 stands apart. It is directly listed for 인쇄 잉크, 잉크젯 잉크, 스크린 인쇄 잉크, 오버프린트 바니시, 이형 코팅, 그리고 anti-sticking-agent use. It can also be used across UV, 용제, 그리고 수계 시스템, and may be added at any stage 또는 그 이후.
3501 should move up first when:
- the buyer wants a route that can travel across more than one system window,
- the real issue is handling behavior after laydown, not only slip feel on a water-based film,
- the shortlist needs to stay relevant to inks, OPV, release coatings, or anti-sticking use, 또는
- the visible surface already behaves directionally well enough, but downstream contact still feels commercially weak.
In short, 3501 belongs first when the buyer needs a broader handling and compatibility route, not the most water-specific friction-reduction answer and not the broadest dry-feel cleanup route.
CHLUMIFE® 3166이 더 나은 첫 번째 선택일 때
3166 becomes more useful when the project is not only about sticking. It belongs earlier when the surface still needs a broader dry feel, 매끄러움, 광택, 수준 측량, 그리고 안티블로킹 balance, especially when the buyer wants one route that can stay relevant across UV, 용제, 그리고 수계 시스템.
The supported Longchang positioning is broader than a friction-only route. 3166 is framed around 탁월한 건조감, 기판 습윤성, 표면 평활도, 긁힘 방지, 안티블로킹, 수준 측량, 그리고 광택 개선. That makes it commercially useful when the surface complaint is mixed and the formulator needs a route that can improve touch and appearance together.
3166 should move up first when:
- the project still needs a broader surface-balance route instead of a single low-friction correction,
- the buyer wants a drier touch and better smoothness along with anti-blocking,
- the line may still move between UV, 용매 및 수성 work, or
- the first lab round is trying to improve feel and visible film quality together.
The watchpoints matter. Longchang’s supported route for 3166 includes risk notes around 핀홀, 호분, 그리고 폼 안정화. So 3166 is not the right “safe default” for every anti-sticking complaint. It is the stronger first route when the buyer specifically needs a broader dry-feel and appearance-balance answer and is willing to screen those risks properly.
Why this page does not replace the live 3166 and 3482X comparison lane
Longchang already has a live comparison lane around 3166 vs 3482X vs 3307X. That page is useful when the buyer question is closer to dry feel vs water-based anti-sticking vs post-cure scratch resistance.
This page answers a different question. Here, the third route is not a scratch-first product like 3307X. It is 3501, which pulls the decision toward broader anti-sticking, release-oriented handling, and downstream compatibility. That creates a different shortlist logic and a different commercial use case.
구매자는 첫 번째 샘플 검토 전에 어떻게 선택해야 할까요?
1. 실패의 실제 단계부터 시작하세요
If the problem shows up as water-based friction and sticking on the finished film, start with 3482X. If the visible film already looks acceptable but downstream handling is still weak across a broader process window, move 3501 earlier. If the project still needs a broader dry-feel and appearance-balance route, move 3166 up.
2. 시스템 경계를 명확하게 보이도록 유지하십시오.
3482X is explicitly 수성 제품만 해당. That alone can make it the wrong first answer for a broader UV or solvent screen, even if the anti-sticking complaint sounds similar. 3501 and 3166 both travel across broader system windows, but they still do different jobs.
3. Separate friction control from broader handling compatibility
Reducing coefficient of friction and preventing sticking is not exactly the same buyer question as building a broader release-oriented or downstream handling route. That is why 3482X and 3501 should not be treated as direct substitutes without checking the real KPI first.
4. Do not hide a dry-feel and appearance problem inside an anti-sticking request
Some labs describe every final-surface complaint as blocking or sticking. But if the real issue is still touch, smoothness, gloss, and broader surface discipline, 3166 may teach more in the first round than a narrower friction-only route.
5. Use the process notes as part of product choice
3482X needs staged water dilution and has solvent-mixing restrictions. 3166 needs pinhole and foam-risk screening. 3501 is more flexible on addition stage. Those are not small details. They often decide which product should be screened first.
이 비교를 통해 추천하는 롱창 여행 경로
- 수성 비점착성 처리 방법: CHLUMIFE® 3482 / 3482X
- Broader handling-compatibility route: 클루미아그® 3501
- Dry-feel and surface-balance route: CHLUMIFE® 3166
- 클러스터 개요: 클로미크릴® 코팅 및 잉크 첨가제
- Function page: 코팅 및 잉크용 블록 방지 첨가제 선택 방법
- Function page: 코팅 및 잉크용 슬립 첨가제 선택 방법
- 관련 애플리케이션 페이지: How to Choose Additives for Furniture Coatings
- 관련 애플리케이션 페이지: How to Choose Additives for Waterborne Topcoats
- 관련 비교 페이지: 3166 vs 3482X vs 3307X
자주 묻는 질문
Which additive should I screen first for a water-based coating that still sticks after drying?
Usually 3482X, when the real issue is lower friction, anti-sticking, and slip behavior in a clearly water-based system.
When should 3501 move ahead of 3482X?
3501 should move ahead when the buyer needs a broader route across coatings, inks, OPV, release-oriented handling, or multi-system downstream compatibility instead of a narrower water-based low-friction answer.
When is 3166 the better first route than the other two?
3166 is usually the better first route when the surface still needs broader dry feel, smoothness, gloss, leveling, and anti-blocking balance, not only friction reduction or handling compatibility.
Can 3482X be treated as a general solvent-based or UV anti-sticking additive?
No. The current company-supported page positions it as a water-based-only route, so buyers should keep that system boundary visible.
Is 3166 just another anti-sticking additive?
Not really. It is broader and more appearance-and-feel oriented. Anti-blocking is part of its value, but the supported product role is wider than a pure anti-sticking route.
Need a tighter anti-sticking shortlist?
If your coating or ink project is stuck between water-based low-friction control, broader downstream handling compatibility, 그리고 dry-feel surface cleanup, define that first bottleneck before requesting samples. That usually makes the next CHLUMICRYL® sample decision much faster and much cleaner.