빠른 답변: 구매자 비교 CHLUMIWE® 3280, 클루미아그® 3501, 그리고 CHLUMIAF® 3062 should not test them as if they solve the same first problem. 3280 should move first when the real bottleneck is still wetting and spread on harder-to-wet print or packaging surfaces. 3501 deserves earlier review when the substrate already wets directionally well enough but the project still needs a broader 달라붙지 않음, release-oriented, 또는 downstream handling route. 3062 belongs earlier when the system is directionally right but 거품, 혼입된 공기, 또는 process-side instability is still holding back production or print quality.
That is the useful shortlist split. This page is not another broad printing-ink overview. It is a tighter 비교 페이지 for buyers already inside the CHLUMICRYL® branch and trying to decide whether the first lab round should start with surface entry, finished-surface handling, 또는 gas-management cleanup.
Why this page deserves to exist beside the live 2100 and 3432 comparison pages
Longchang already has live CHLUMICRYL® pages for 2100 vs 3501 vs 3062 및 3280 vs 3432 vs 3501. Those pages answer different buyer questions. The 2100 page is a broader printing-ink split between wetting, anti-sticking compatibility, and defoaming. The 3280 vs 3432 vs 3501 page is a difficult-substrate and print-face shortlist between wetting, leveling, and anti-sticking.
This page answers a cleaner third question: what if the wetting route needs to stay harder-surface and 3280-led, but the real alternative is not leveling, it is either broader anti-sticking compatibility or process-side foam control? That is a distinct lab decision and a useful one for buyers working on films, coated stocks, packaging structures, and other jobs where the first failure may shift between surface entry 및 production stability.
What the current company-supported facts actually separate
- CHLUMIWE® 3280 is supported by the current Longchang product page as a waterborne and solventborne organosilicone wetting agent. The page directly lists 인쇄 잉크 및 packaging coatings, 추천합니다 0.2% to 3.0% dosage, allows addition at any stage or post-addition, and supports dilution with water, alcohol, aliphatic hydrocarbons, and aromatic hydrocarbons. The page also frames the product around excellent substrate wetting, 뛰어난 호환성, and easier use in both waterborne and solventborne systems.
- 클루미아그® 3501 is supported as a route for 인쇄 잉크, 잉크젯 잉크, 스크린 인쇄 잉크, 오버프린트 바니시, 이형 코팅, 그리고 anti-sticking-agent use. The current public page supports use across UV, 용제, 그리고 수계 시스템, 와 함께 addition at any stage 또는 그 이후.
- CHLUMIAF® 3062 입니다 소포제 우선 투여 방식롱창은 이를 지지합니다. 인쇄 잉크 권장 복용량과 함께 0.1% ~ 0.5%, supports use in UV, 용제, 그리고 수계 시스템, and adds a practical watchpoint that if solvent dilution is used, stability and defoaming performance should be tested first.
That is enough company-supported separation to build a real shortlist. External framing is used only conservatively, around the common industry split between surface wetting and substrate entry, finished-surface handling compatibility, 그리고 process-side air management.
간략 비교표: 어떤 경로가 먼저 화면에 나와야 할까요?
| 구매자 우선권 | 3280 | 3501 | 3062 |
|---|---|---|---|
| 메인 첫 화면 작업 | Difficult-substrate wetting, spread, and surface-entry control | Broader anti-sticking, release-oriented handling, and downstream compatibility | Process-side foam control, air release, and production stability |
| 권장 복용량 | 0.2% to 3.0% | Current public page emphasizes stage flexibility more clearly than a visible dosage band in the summary used here | 0.1% to 0.5% for printing inks |
| 시스템 창 | Waterborne and solventborne systems | UV, 용매, 수성 | UV, 용매, 수성 |
| 덧셈 논리 | Any stage or post-addition, with broad dilution flexibility | Any stage or later addition | Use directly or verify solvent-dilution stability first |
| 최적의 사용 시기 | The substrate still does not accept the ink or coating cleanly enough | The system already wets directionally but still needs broader anti-sticking or handling support | The process is being limited by foam, entrained air, or circulation-side instability |
| 주요 감시 지점 | Do not use it as a vague catch-all if the real issue has already shifted to handling or foam | Do not force it into a pure wetting-first problem just because it has broad compatibility | Do not use a defoamer-first route to hide a basic wetting or finished-surface handling problem |
When CHLUMIWE® 3280 is the better first move
3280 should move first when the print or packaging surface still is not being entered cleanly enough. This is the tighter route when the formulation still needs better 젖음, spread, 그리고 surface contact on films, coated stocks, or other harder-to-wet substrates, and the team wants a route already positioned for both 인쇄 잉크 및 packaging coatings.
The current Longchang product page gives 3280 a practical operating window for that job. It supports 0.2% to 3.0% dosage, allows addition at any stage or post-addition, and allows dilution with water, alcohol, aliphatic hydrocarbons, and aromatic hydrocarbons. The page also frames it around excellent substrate wetting 및 뛰어난 호환성.
3280 is usually the better first route when:
- the visible failure is still poor surface entry or weak spread,
- 프로젝트는 다음 위치에 있습니다. 인쇄 잉크 또는 packaging coatings where the substrate itself is still the first barrier,
- the team wants a wetting route that can travel through both waterborne and solventborne handling logic, or
- the first question is still how cleanly does the formulation meet the surface?
In short, 3280 belongs first when the job still is a wetting-led substrate problem.
When CHLUMIAG® 3501 is the better first move
3501 deserves earlier review when the project has already moved beyond basic surface entry. It becomes the stronger route when the ink or coating is directionally laying down, but the buyer still needs broader 달라붙지 않음, release-oriented, 또는 downstream handling support.
The current Longchang page makes that broader positioning unusually clear. 3501 is directly listed for 인쇄 잉크, 잉크젯 잉크, 스크린 인쇄 잉크, 오버프린트 바니시, 이형 코팅, 그리고 anti-sticking-agent use. It can also be added at any stage or later and stays open across UV, 용제, 그리고 수계 시스템.
3501 is usually the better first route when:
- the printed surface already wets acceptably, but the project still has stacking, contact-separation, 또는 handling pressure,
- the buyer wants one route that can sit credibly across 잉크, OPV, 그리고 release-adjacent work,
- the first screening decision needs to stay aligned with finished-surface behavior instead of only initial spread, or
- the team needs a route that is easier to slot into different production stages during screening.
That makes 3501 the better first move when the real question is not will it wet the substrate? but will the printed or coated surface behave properly afterward?
When CHLUMIAF® 3062 is the better first move
3062 should move first when the printing-ink or packaging-coating project already has a plausible surface route but the system keeps failing because of 거품, 혼입된 공기, 또는 poor process stability. That is a different job from improving wetting or anti-sticking compatibility, and it can waste a lot of lab time if the team keeps screening more surface additives before solving the gas-management problem.
Longchang supports 3062 as a defoamer route for 인쇄 잉크권장 복용량은 다음과 같습니다. 0.1% ~ 0.5% and applicability across UV, 용제, 그리고 수계 시스템. The product page also adds a practical note that if solvent dilution is used, the team should verify stability and defoaming performance 첫째.
3062 is usually the better first route when:
- the visible failure is 거품 during manufacture, letdown, circulation, or printing,
- the line is directionally correct on wetting but still unstable because of 혼입된 공기,
- the buyer wants a dedicated printing-ink defoamer route rather than another broad surface-control additive, or
- the first task is to clean up production behavior before optimizing finished-surface handling.
So 3062 belongs first when the project is being limited by gas management and process stability, not by missing wetting or handling compatibility.
구매자는 첫 번째 샘플 검토 전에 어떻게 선택해야 할까요?
1. Start with the first visible bottleneck
If the printing or packaging surface still is not being entered cleanly, start with 3280. If the system already wets but still needs anti-sticking or handling support, move 3501 earlier. If the process keeps failing because of foam or entrained air, move 3062 up.
2. Keep wetting, handling, and defoaming separate
One of the easiest formulation mistakes is to keep testing more wetting agents when the project has already shifted into downstream handling, or to keep changing surface additives when the real blocker is foam control. This shortlist works only if the first job stays clear.
3. Use the supported operating notes, not only the headline role
3280 has broad dilution flexibility plus waterborne and solventborne fit. 3501 can be added at any stage or later. 3062 can be diluted, but dilution stability and defoaming performance should be checked first. Those are part of the selection logic, not minor footnotes.
4. Keep the page type honest
This is not a catch-all “best additive for all inks” page. It is a product-comparison page for buyers already comparing three specific CHLUMICRYL® routes. That narrower comparison intent is exactly why it can sit cleanly beside the broader application pages and the already-live comparison pages.
이 비교를 통해 추천하는 롱창 여행 경로
- 먼저 물을 적시는 방법: CHLUMIWE® 3280
- Broader print-side compatibility route: 클루미아그® 3501
- Defoamer-first route: CHLUMIAF® 3062
- 클러스터 개요: 클로미크릴® 코팅 및 잉크 첨가제
- Related comparison: 2100 vs 3501 vs 3062
- Related comparison: 3280 vs 3432 vs 3501
- 관련 기능 페이지: 코팅, 잉크 및 까다로운 기판에 적합한 습윤 첨가제 선택 방법
- 관련 애플리케이션 페이지: 스크린 인쇄용 잉크 첨가제 선택 방법
자주 묻는 질문
Which product should I test first if a printing ink is not spreading cleanly on the substrate?
Usually CHLUMIWE® 3280, because it is the cleaner wetting-first route on this page when the real problem is surface entry and spread.
When should 3501 move ahead of 3280?
3501 should move ahead when the system already wets reasonably well but the project still needs broader anti-sticking, print-side handling, or downstream compatibility support.
When should 3062 move ahead of the other two?
3062 should move ahead when persistent foam, entrained air, or process-side instability is the main barrier to acceptable manufacturing or print quality.
Can one of these three additives solve every printing-ink problem?
No. Their supported first-screen logic is different enough that buyers should not treat them as interchangeable. The faster route is to identify whether the problem starts at wetting, handling compatibility, or foam control.
Why not just use the broader 2100 comparison instead?
Use the broader 2100 comparison when the first wetting route can stay general. Use this page when the wetting route itself needs to stay tighter and more 3280-led while the realistic alternatives are broader handling compatibility or process-side defoaming.
보다 엄선된 1차 후보 명단이 필요하신가요?
If your printing-ink or packaging-coating project is stuck between surface wetting, anti-sticking and handling compatibility, 그리고 거품 조절, stop testing 3280, 3501, and 3062 as if they solve the same first problem. Separate the actual bottleneck first. That usually makes the next CHLUMICRYL® sample decision much faster.