Jawaban singkat: pembeli memilih additives for waterborne inkjet inks usually get a better first shortlist when they separate three different jobs early instead of asking one additive to rescue every print-side symptom at once. Start with CHLUMIWE® 2100 when the waterborne inkjet ink still needs stronger pembasahan substrat, spread, and lower-surface-tension entry on film, coated paper, or another difficult surface. Move CHLUMIAG® 3501 forward when the ink already lays down directionally but the dried print still needs anti-sticking, release, or downstream handling control. Start with CHLUMIAF® 3062 when the real bottleneck is foam, microbubbles, or entrained air in a waterborne inkjet route.
This page stays inside the redirected Pelapis dan Aditif Tinta CHLUMICRYL® direction and does not fall back to the older photoinitiator cluster. It also is not a duplicate of Longchang’s already-live inkjet ink additives page, which covers a broader chemistry window across UV, solvent, and water-based systems. The buyer question here is narrower: which additive deserves the first trial when the ink is specifically waterborne, printed by industrial inkjet, and still not giving a commercially stable result on the target surface?
Why waterborne inkjet inks deserve their own additive page
A waterborne inkjet ink sits in a tighter buyer lane than a broad inkjet article because the formulation has to keep together water-based process behavior, droplet laydown on the target surface, Dan dried-print handling after deposition. A drawdown can look acceptable while the live print job still fails commercially because the ink does not wet the surface cleanly, the printed face still shows tack or drag after drying, or the process keeps carrying air into the system.
That makes waterborne inkjet a cleaner application split than another generic print page. Buyers often need to separate a surface-entry problem, A dried-print handling problem, dan sebuah foam or air-management problem before they can judge the rest of the package honestly. Those are different first screens, even when one print trial appears to show all three symptoms together.
General industry framing supports that split conservatively. Waterborne inkjet systems are commonly judged by how cleanly they wet the target substrate, whether the dried print can tolerate later contact or handling, and whether bubbles or entrained air disturb print consistency. The product-specific facts below still stay tied to current Longchang-supported product pages.
What the current company-supported evidence actually separates
- CHLUMIWE® 2100 didukung oleh Longchang untuk tinta cetak, pernis cetak berlebih, Dan tinta inkjet, dengan dosis yang disarankan sebesar 0,1% hingga 1,0%, addition during grinding, stirring, atau after production, optional pre-dilution with water, alcohols, alkanes, or aromatics, and applicability across UV, pelarut, Dan sistem berbasis air. The current public page also states that, with a small amount added, it will tidak menghasilkan busa stabil di bawah dispersi kecepatan tinggi.
- CHLUMIAG® 3501 is supported by Longchang as a polisiloksan termodifikasi multi-komponen that can be added at any stage or later and used across UV, pelarut, Dan sistem berbasis air. The current product page directly lists tinta cetak, tinta inkjet, pernis cetak berlebih, lapisan pelepas, Dan anti-sticking-agent use.
- CHLUMIAF® 3062 is supported by Longchang as a polisiloksan yang dimodifikasi polieter defoamer with a recommended dosage of 0.1% hingga 0.5% untuk tinta cetak, plus applicability across UV, pelarut, Dan sistem berbasis air. The current public page directly positions it as a printing ink defoamer, which is a clean fit when the waterborne inkjet route is being limited by microbubbles or low-foam process stability.
That is enough company-supported separation to build a real B2B buyer page without inventing unsupported jetting, adhesion, or cure-performance claims. The goal is not to claim one additive solves every waterborne inkjet complaint. The goal is to help the buyer choose the first better trial route.
Tabel perbandingan singkat: rute mana yang layak ditampilkan di layar pertama?
| Buyer priority in waterborne inkjet inks | Rute pertama terbaik | Mengapa ini harus didahulukan? | Titik pengawasan utama |
|---|---|---|---|
| The waterborne inkjet ink still hesitates, pulls back, or spreads weakly on film, coated stock, or another difficult substrate | CHLUMIWE® 2100 | The supported route is built around broad ink use, flexible addition timing, and a wetting-first path that stays open to water-based systems | Use it when the first problem is still substrate entry, not when the real complaint starts after drying on the printed face |
| The print already lays down directionally, but the dried face still blocks, drags, or handles poorly during later contact or converting | CHLUMIAG® 3501 | Longchang directly supports it for inkjet-ink use, anti-sticking logic, and broader print-side handling across water-based systems | Do not treat it as a substitute for true wetting correction when the ink still cannot enter the surface cleanly |
| Foam, microbubbles, or entrained air are still corrupting print consistency or final print appearance | CHLUMIAF® 3062 | Longchang directly positions it as a printing-ink defoamer and supports water-based system use | It is a defoaming route, not the first answer to a dried-print handling problem or a missing wetting route |
When CHLUMIWE® 2100 is the better first move
2100 should move first when the waterborne inkjet project still looks like a substrate-entry problem. This is the cleaner starting route when the ink is not spreading or covering the target surface cleanly enough to judge the rest of the package honestly.
That distinction matters because waterborne inkjet teams often see more than one complaint at once. A weakly wetting ink can also look rough or unstable simply because the film never settled correctly on the substrate in the first place. If the surface-entry route is still wrong, later handling or defoaming trials become harder to read.
- Best first-screen use: difficult-substrate wetting and spread in waterborne inkjet inks
- Supported dosage window: 0,1% hingga 1,0% dari total formulasi
- Kekuatan utama: cleaner surface contact and more interpretable first laydown on difficult substrates
- Main caution: keep it as the first move when wetting is the dominant bottleneck, not when the print already lands acceptably and the real complaint starts later
In short, 2100 is the better first move when the question is still how the waterborne inkjet ink meets the substrate.
When CHLUMIAG® 3501 is the better first move
3501 should move ahead first when the ink already lays down directionally but still shows a dried-print handling problem. This route is stronger when the issue is not basic surface entry, but blocking, sticking, drag, release-oriented handling, or later contact pressure on the printed face.
That matters in waterborne inkjet because many jobs are not finished when the droplets first land. Stacking, rewinding, overprint varnish, lamination, or other downstream contact can expose a different additive problem from the original laydown stage. Longchang’s current public page is useful here because 3501 is not positioned only as a narrow coating additive. The supported route keeps together tinta cetak, tinta inkjet, pernis cetak berlebih, lapisan pelepas, Dan anti-sticking use, while staying open across UV, pelarut, Dan sistem berbasis air.
- Best first-screen use: anti-sticking, release, and downstream handling control after the waterborne inkjet ink already lays down directionally
- System fit: UV, solvent, and water-based systems on the current public page
- Kekuatan utama: one route that already supports inkjet-ink use plus broader handling logic
- Main caution: if the printed film still has obvious wetting failure, 3501 should not be used to hide a problem that still belongs to the 2100 route first
So 3501 is the better first move when the waterborne inkjet project needs a handling-first cleanup route after laydown is already directionally acceptable.
When CHLUMIAF® 3062 is the better first move
3062 should move ahead first when the waterborne inkjet route is being limited by foam, gelembung mikro, atau entrained air. In those cases, a better wetting route or a better handling route usually will not give the team an honest print read until the process-side bubble pressure is under control.
Longchang’s public product page is direct here. 3062 is positioned as a printing ink defoamer, supports a 0.1% hingga 0.5% dosage window for printing inks, and remains open to sistem berbasis air. That makes it commercially useful in waterborne inkjet workflows where agitation, circulation, or process handling can keep feeding air into the ink even after a static drawdown looks acceptable.
- Best first-screen use: persistent foam, microbubble carry-through, or low-foam process-control problems in waterborne inkjet inks
- Supported dosage window: 0.1% to 0.5% of total formulation for printing inks
- Kekuatan utama: a defoaming route directly tied by Longchang to printing inks and water-based systems
- Main caution: it is not a substitute for a true wetting route or a dried-print handling route when those are the real first bottlenecks
This is the stronger first move when the visible defect is being limited by air management, not by missing wetting or missing handling control.
Bagaimana pembeli sebaiknya memilih sebelum meminta sampel?
1. Start with the real first failure in the print trial
If the waterborne inkjet ink still hesitates on the substrate, start with 2100. If the ink already lays down directionally but still handles badly after drying, move 3501 forward. If foam or microbubbles are still corrupting the print read, start with 3062.
2. Keep substrate entry separate from dried-print handling
A waterborne inkjet ink that cannot wet the surface cleanly and a waterborne inkjet ink that prints acceptably but still blocks during later contact are not the same additive problem. Separating those routes early usually makes the first trial set much more honest.
3. Keep foam control separate from both surface routes
Defoaming is not just a smaller version of wetting correction or anti-sticking control. If entrained air is still sitting in the system, it can distort how the team reads every later additive on the print line.
4. Respect the watchpoint, not only the headline benefit
2100 brings a substrate-entry route. 3501 brings a broader anti-sticking and handling route. 3062 brings a direct printing-ink defoaming route. Those practical differences usually decide the better first route more than the additive family name alone.
5. Keep the first trial set small
For many waterborne inkjet buyers, one 2100 wetting route, satu 3501 handling route, dan satu 3062 defoaming route teach more than an overloaded first screen filled with partially overlapping additives.
Rute Longchang yang direkomendasikan dari halaman ini
- Rute pembasahan: CHLUMIWE® 2100
- Handling route: CHLUMIAG® 3501
- Defoaming route: CHLUMIAF® 3062
- Gambaran umum klaster: Pelapis dan Aditif Tinta CHLUMICRYL®
- Related broad page: How to Choose Additives for Inkjet Inks
- Related waterborne print page: How to Choose Additives for Waterborne Flexographic Inks
- Related waterborne print page: How to Choose Additives for Waterborne Gravure Inks
- Related waterborne print page: How to Choose Additives for Waterborne Screen Inks
- Halaman fungsi terkait: Cara Memilih Aditif Pembasah untuk Pelapis dan Tinta
- Halaman fungsi terkait: Cara Memilih Penghilang Busa untuk Pelapis dan Tinta
- Halaman fungsi terkait: Cara Memilih Aditif Anti-Blocking untuk Pelapis dan Tinta
PERTANYAAN YANG SERING DIAJUKAN
Which additive should I screen first if a waterborne inkjet ink still is not spreading cleanly?
Usually 2100, because the supported route is built around broad ink-use fit and a wetting-first path that matches a real entry-and-spread problem more directly than a handling or defoaming route.
When should 3501 move ahead of 2100?
3501 should move ahead when the ink already lays down directionally but the dried print still blocks, drags, or handles poorly during later contact, stacking, or converting.
When does 3062 make more sense than the other two?
It makes more sense when foam, microbubbles, or entrained air still dominate the visible defect pattern and the team needs a printing-ink defoamer route rather than another surface-control trial.
Is this page the same as the broader inkjet-ink additives page?
No. The broader inkjet page still answers the wider application question across UV, solvent, and water-based systems. This page is narrower and helps waterborne inkjet buyers decide whether the first bottleneck is substrate entry, dried-print handling, or low-foam process control.
Does this page make food-contact or regulatory claims for packaging work?
No. This page stays focused on additive-selection logic for waterborne inkjet workflows. Any compliance, migration, or final end-use qualification still needs separate formulation and regulatory review.
Langkah selanjutnya
If your waterborne inkjet project is stuck between weak substrate entry, dried-print handling pressure, Dan microbubble or foam pressure, stop treating them as the same additive request. Start with the real bottleneck first. That usually makes the next CHLUMICRYL® sample decision faster and more commercially useful.