Description
AgeSin® DF-D9904BR / Defoamer
| Composition | Polyether modified polysiloxane compound, silica free |
| Appearance | Clear liquid |
| Solvent | Dipropylene glycol methyl ether |
| Density | 0.95-0.99 g/ml (25±1)℃ |
| Viscosity | 6-30 s (coating-4 cup method)(25±0.2)℃ |
| Active substance content | 30% |
| Flash point | ≥70℃ |
Note: This performance represents typical results only and is not considered a specification, based on the specific COA.
AgeSin® WE-D9904BR Application Areas
Water-based systems
AgeSin® WE-D9904BR Main characteristics
1、It does not contain silica and has good defoaming property to prevent micro bubbles and pinholes in the coating film of water-based coatings and inks.
2、It needs to be added under high shear condition, not recommended to be added afterwards.
AgeSin® WE-D9904BR Use method
In order to improve the compatibility of defoamer and resin system, it is recommended to add defoamer to the co-solvent first, then add it to the abrasive under high speed stirring to disperse evenly.
Recommended dosage
Addition amount (total formula) 0.1-1.0%
Storage stability
Keep in unopened original package for 24 months. Stratification and turbidity may occur when the temperature is below 5°C. Heating and mixing thoroughly before use will not affect the product quality. Product beyond the storage period can continue to be used after passing inspection. Before the container is completely empty, it must be tightly closed immediately after use.
AgeSin® WE-D9904BR Packing
25KG / 180KG.
Contact Us Now!
If you need COA, MSDS or TDS, please fill in your contact information in the form below, we will usually contact you within 24 hours. You could also email me info@longchangchemical.com during working hours ( 8:30 am to 6:00 pm UTC+8 Mon.~Sat. ) or use the website live chat to get prompt reply.
