빠른 답변: 구매 담당자가 작업 중입니다 waterborne topcoats usually get to a better first shortlist when they stop asking one additive to fix every finish problem and instead separate three different jobs. 슐루밀® 3345 should move first when the topcoat still needs cleaner wetting and more even leveling in the visible film. 클루미아그® 3501 deserves the earlier screen when the coating already lays down directionally but still needs a stronger anti-sticking and downstream handling route. 클루미크릴® DF-D9904BR is the cleaner first move when the real bottleneck is foam, microbubbles, or pinholes in a water-based finish process.
That is the commercially useful split. This page is not a fallback to a photoinitiator topic, and it is not a duplicate of Longchang’s already-live 수성 산업용 코팅제, waterborne direct-to-metal, 또는 waterborne primer pages. It is a new CHLUMICRYL® application page for buyers whose project is already at the topcoat stage and who need a tighter first-screen decision around visible laydown, surface handling after film formation, 그리고 process-side air management.
Why waterborne topcoats deserve their own additive page
Waterborne topcoats are judged differently from primers. The buyer is usually looking at the final visible film, not only whether the coating entered the substrate. A topcoat that seems acceptable at first can still lose the project because the finish does not level calmly enough, panels block or stick in handling, or microbubbles stay trapped through drying and leave pinholes that ruin the appearance read.
That creates a narrower B2B selection problem than a broad industrial-coating page. In normal formulation work, the first additive decision often needs to separate a wetting-and-leveling cleanup job from a more specific anti-sticking handling job, and both from a true defoaming or microbubble-control job. Those are not the same first screen, even if they can show up on the same drawdown.
Longchang already has the broader 클로미크릴® 코팅 및 잉크 첨가제 hub, plus live pages for 소포제, 미끄럼 방지 첨가제, 수성 산업용 코팅제, 그리고 waterborne primers. Those pages help buyers understand the branch. This page answers the narrower question that often comes later in the project: which additive deserves the first sample round when the waterborne topcoat still needs cleaner laydown, more reliable anti-sticking behavior, or lower bubble carry-through?
What the current company-supported evidence actually separates
- 슐루밀® 3345 지원됩니다 polyether modified polysiloxane and is positioned directly as a 습윤 및 평활성제. Longchang supports it across 수성, 용제, 그리고 UV 시스템권장 복용량은 다음과 같습니다. 0.1% ~ 1.0%. The current product page supports addition during grinding, stirring, 또는 after production또한, 다음과 같은 공용매를 첨가하면 디프로필렌 글리콜 메틸 에테르 can increase the effect.
- 클루미아그® 3501 지원됩니다 다성분 변성 폴리실록산 with recommended dosage at 0.1% ~ 1.0%. Longchang supports direct addition or dilution, and keeps it open across UV, 용제, 그리고 수계 시스템. Current Longchang-controlled application routing places 3501 inside 달라붙지 않음, printing-ink and overprint-varnish handling, plus broader general industrial, wood-coating, 그리고 furniture-coating branches. That is enough company-supported separation to use it here as a handling-first topcoat route without inventing unsupported performance claims.
- DF-D9904BR 지원됩니다 polyether modified polysiloxane compound, silica-free, for 수계 시스템. Longchang directly positions it to prevent microbubbles and pinholes in the coating film of water-based coatings and inks. The supported dosage range is 0.1% ~ 1.0%, and the page recommends 고전단 첨가, ideally after first entering a co-solvent rather than being dropped into the formulation late.
That is enough company-supported separation to build a real buyer page. External framing is used only conservatively for the general industry point that waterborne topcoat additive decisions often split into visible film laydown, surface contact after drying, 그리고 trapped-air cleanup, rather than one generic silicone story.
간략 비교표: 어떤 경로가 먼저 화면에 나와야 할까요?
| 구매자 우선권 | 3345 | 3501 | DF-D9904BR |
|---|---|---|---|
| 메인 첫 화면 작업 | Wetting and leveling cleanup in the visible topcoat film | Anti-sticking and downstream handling route | Water-based foam, microbubble, and pinhole control |
| 권장 복용량 | 0.1% ~ 1.0% | 0.1% ~ 1.0% | 0.1% ~ 1.0% |
| 시스템 창 | Water-based, solvent, UV | Water-based, solvent, UV | 물 기반 시스템 |
| 덧셈 논리 | Grinding, stirring, or after production; co-solvent can enhance effect | Direct addition or dilution before use | High-shear incorporation, preferably through a co-solvent step |
| 최적의 사용 시기 | The topcoat still looks unsettled, uneven, or less calm than the buyer needs | The film already looks directionally acceptable but stacked-surface or release handling is still weak | Microbubbles or pinholes are still ruining the visible finish |
| 주요 감시 지점 | Use it when visible laydown is the real first bottleneck, not when trapped air dominates | Use it when the project has shifted into handling and anti-sticking questions, not first-pass bubble rescue | Not a late shortcut; addition discipline matters |
CHLUMILE® 3345가 더 나은 첫걸음이 될 때
3345 should move first when the waterborne topcoat still needs calmer wetting and more even leveling. This is the cleaner route when the finish can already form a film, but the visible result still looks less uniform, less smooth, or less commercially ready than the buyer wants.
That distinction matters because topcoat buyers often are not solving raw substrate entry anymore. They are solving how the finish looks after it lays down. Longchang’s product page is unusually useful here because 3345 is not framed only as a surfactant or only as a leveling aid. It is positioned directly as a 습윤 및 평활성제.
3345번 도로를 먼저 선택하는 것이 일반적으로 더 나은 경우는 다음과 같습니다.
- the waterborne topcoat still shows visible unevenness after application,
- the team wants one first screen for both surface entry and flow-out balance,
- the finish project still is in development and may benefit from co-solvent-assisted optimization, or
- the buyer needs a broader wetting-plus-leveling benchmark before moving into narrower handling or defect-correction routes.
This is often the most commercially useful first move when the film is reaching the surface, but not finishing cleanly enough.
When CHLUMIAG® 3501 is the better first move
3501 deserves the earlier screen when the waterborne topcoat already lays down directionally well enough, but the buyer still needs a stronger anti-sticking and handling route. This is the cleaner first choice when the visible finish is no longer the whole problem and the project is now getting judged by what happens after the film forms.
Longchang’s current company-controlled application routing keeps 3501 inside anti-sticking work and places it across general industrial, overprint-varnish, wood-coating, and furniture-coating branches while keeping water-based compatibility open. That makes it commercially useful as a topcoat-handling route even when the project is not identical to those exact application pages.
3501 is usually the better first route when:
- the waterborne topcoat already looks directionally acceptable but still blocks or sticks too easily in contact handling,
- the lab wants a more dedicated surface-release route than a broad wetting-and-leveling aid,
- the finish needs to stay open to wider coating-system comparisons later, or
- the buyer has moved beyond initial appearance cleanup and into downstream handling stability.
This is the stronger first path when the real commercial question is not only how the topcoat looks but how the coated surface behaves after drying or curing.
When DF-D9904BR is the better first move
DF-D9904BR should move ahead first when the waterborne topcoat is still losing the fight to foam, microbubbles, or pinholes. In those cases, better wetting or better anti-sticking usually will not clean up the finish enough to judge the rest of the package honestly.
Longchang’s product page is direct here. DF-D9904BR is supported specifically to prevent microbubbles and pinholes in the coating film of water-based coatings and inks, and it comes with a clear process note: add under high shear and avoid treating it like a casual late after-addition shortcut.
DF-D9904BR is usually the better first route when:
- the topcoat still carries persistent fine bubbles into the dried film,
- pinholes are making it hard to judge whether laydown and handling are actually acceptable,
- the process already has a realistic high-shear incorporation step, or
- the formulator needs to clean up trapped-air behavior before reading any higher-level surface additive result.
This is the stronger first move when the visible topcoat is being limited by air management, not by a missing wetting or anti-sticking route.
구매자는 첫 번째 샘플 검토 전에 어떻게 선택해야 할까요?
1. Start with the first visible finish failure
If the topcoat still looks unsettled or uneven, start with 3345. If it looks directionally acceptable but still blocks or sticks in handling, move 3501 forward. If bubbles and pinholes are still dominating the panel, start with DF-D9904BR.
2. Keep visible laydown logic separate from handling logic
Many finish labs collapse leveling and anti-sticking into the same request. That usually makes the first sample round noisy. A topcoat that looks rough and a topcoat that sticks in stacked handling are not necessarily asking for the same additive first.
3. Keep bubble cleanup separate from both surface routes
Foam and microbubble control are not just smaller versions of leveling correction. If trapped air is still in the film, it can distort how the team reads every other additive.
4. Respect the addition discipline
3345 is flexible around process stage. 3501 can be added directly or after dilution. DF-D9904BR should be treated more carefully, because Longchang explicitly recommends high-shear incorporation and earlier process discipline.
5. Keep the first trial set small and honest
For many waterborne topcoat projects, the cleanest first plan is one 3345 wetting-and-leveling route, 하나 3501 anti-sticking route그리고 하나 DF-D9904BR bubble-control route. That usually teaches more than forcing several near-neighbor additives into the same starting lane.
이 페이지에서 추천하는 롱창 코스
- Laydown cleanup route: 슐루밀® 3345
- Anti-sticking route: 클루미아그® 3501
- Microbubble-control route: 클루미크릴® DF-D9904BR
- 클러스터 개요: 클로미크릴® 코팅 및 잉크 첨가제
- 관련 애플리케이션 페이지: 수성 산업용 코팅용 표면 첨가제 선택 방법
- 관련 애플리케이션 페이지: How to Choose Additives for Waterborne Primers
- 관련 기능 페이지: 코팅 및 잉크용 소포제 선택 방법
자주 묻는 질문
Which additive should I screen first if my waterborne topcoat still looks uneven after application?
Usually CHLUMILE® 3345, because Longchang directly positions it as a wetting and leveling agent with water-based applicability and flexible process-stage addition.
When should 3501 move ahead of 3345?
3501 should move ahead when the finish already looks directionally acceptable and the main problem has shifted into anti-sticking behavior or downstream handling stability.
When does DF-D9904BR make more sense than the other two?
It makes more sense when foam, microbubbles, or pinholes still dominate the visible defect pattern and the process can follow the recommended high-shear addition method.
Is this page the same as the waterborne industrial coating page?
No. The broader industrial page answers an earlier, wider surface-additive question. This topcoat page is narrower and helps buyers choose between three first-screen routes once the project is already at the finish-film stage.
Need a tighter shortlist?
If your waterborne topcoat project is stuck between visible laydown cleanup, anti-sticking handling, 그리고 microbubble carry-through, stop treating them as the same additive request. Start with the real bottleneck. That usually makes the next CHLUMICRYL® sample decision faster and more commercially useful.