빠른 답변: 구매 담당자가 작업 중입니다 waterborne epoxy primers usually get a cleaner first shortlist when they stop treating every early-film defect like one vague additive problem and instead separate three different jobs. 클루미크릴® WD-D547 should move first when the real bottleneck is substrate-entry wetting, spreading, and anti-cratering at the primer stage. 클루미아그® 3467 deserves the earlier screen when the primer still shows a compatibility-first crater, fisheye, or pullback problem. 클루미크릴® DF-D9904BR is the cleaner first move when the primer already can form a film but still is carrying microbubbles, foam carry-through, or pinholes that block an honest surface read before topcoat.
That is the commercially useful split. This page stays inside the CHLUMICRYL® coating-and-ink-additives direction and does ~ 아니다 drift back to the older photoinitiator cluster. It also is not a duplicate of Longchang’s already-live waterborne primer page, the broader anti-corrosion coating page, or the later-stage waterborne epoxy topcoat page. It is a tighter waterborne epoxy-primer buyer page for teams that need to stabilize the underlayer before corrosion, adhesion, recoating, or finish-stage decisions can be judged honestly.
Why waterborne epoxy primers deserve their own additive page
A waterborne epoxy primer sits in a tighter decision lane than a broad waterborne-primer article. The buyer is usually not asking for a general primer overview anymore. The project already is inside an epoxy route, and the practical question is which additive deserves the first sample round when the primer still is not wetting cleanly, is breaking into crater-like defects, or is trapping enough air to distort the panel read before the next layer.
That creates a different first-screen question from the already-live waterborne epoxy topcoat page. A topcoat page is judged more by final appearance and finished-surface handling. A primer page is earlier and more underlayer-focused. In practical formulation work, the first additive decision often needs to separate a substrate-entry wetting and anti-cratering problem from a compatibility-first film-stability problem, and both from a true water-based microbubble and pinhole problem. Those are not the same first screen, even when the same drawdown shows all three symptoms.
General industry framing is kept conservative here. Waterborne epoxy primers are commonly judged first by how cleanly they wet the surface, whether the primer film stays stable enough for recoating or later layers, and whether trapped air is still corrupting the underlayer. Product-level claims below stay anchored to current Longchang-supported product pages.
What the current company-supported evidence actually separates
- 클루미크릴® WD-D547 롱창의 지원을 받습니다. 폴리에테르 변성 폴리디메틸실록산 route for water-borne, solvent, solvent-free, and UV-cure paints. The current company page supports 뛰어난 습윤 및 확산력, says it can effectively reduce surface tension in water systems, and also keeps together 반분화구, re-coating, 거품 제거, 그리고 수준 측량. Supported dosage is 0.1% ~ 0.5%, with direct addition or dilution before addition.
- 클루미아그® 3467 롱창의 지원을 받습니다. 다성분 변성 폴리실록산 ~을 위한 UV, 용매 및 수성 시스템. The current company-supported route keeps together 수준 측량, 반분화구, 기판 습윤, and a clear note that it 시스템 호환성을 우선시합니다.. Supported dosage is 0.05% ~ 1.0% of total formulation for solvent systems, 0.5%에서 5%까지 of resin amount for resin modification, and 0.5%에서 5%까지 of total formulation for water-based systems.
- 클루미크릴® DF-D9904BR 지원됩니다 polyether modified polysiloxane compound, silica-free, for 수계 시스템. Longchang directly positions it to prevent microbubbles and pinholes in the coating film of water-based coatings and inks. The supported dosage range is 0.1% ~ 1.0%, and the product page recommends co-solvent-first, high-shear incorporation instead of casual late after-addition.
That is enough company-supported separation to build a real buyer page. The goal is not to pretend one additive solves every epoxy-primer complaint. The goal is to help the buyer choose the first better screening route based on what the waterborne epoxy primer actually is failing to do.
간략 비교표: 어떤 경로가 먼저 화면에 나와야 할까요?
| Buyer priority in waterborne epoxy primers | 최적의 첫 번째 경로 | 왜 이것이 첫 번째에 있어야 하는가 | 주요 감시 지점 |
|---|---|---|---|
| Poor substrate wetting, hesitant spread, or early crater pressure in the primer underlayer | 클루미크릴® WD-D547 | Longchang directly supports water-system surface-tension reduction plus wetting, spreading, anti-cratering, recoating, and leveling in one primer-relevant route | Keep it as a wetting-and-primer-stability route, not a vague answer to every later-stage finish problem |
| The primer reaches the surface but still breaks into crater, fisheye, or pullback behavior that looks compatibility-led | 클루미아그® 3467 | The supported route keeps together compatibility-first logic, anti-cratering, leveling, and substrate wetting | Its current product logic prioritizes compatibility more than refined finish feel |
| The primer already forms, but trapped air still creates microbubbles or pinholes before the next coat | 클루미크릴® DF-D9904BR | Longchang directly positions it to prevent microbubbles and pinholes in water-based coating films | It is not a casual late after-add, and the supported co-solvent plus high-shear route should be respected |
When CHLUMICRYL® WD-D547 is the better first move
WD-D547 should move first when the waterborne epoxy primer still struggles at surface entry. This is the stronger first route when the visible problem starts as reluctant wetting, weak spread, crater-sensitive drawdown behavior, or a primer layer that still does not settle into a reliable undercoat before the next step.
That matters because a waterborne epoxy primer usually has to do more than simply touch the surface. The underlayer has to give the formulator a stable enough base to judge recoating, adhesion build, and later appearance. If the primer never reaches a clean first-contact state, later compatibility or bubble-control routes can become harder to read honestly.
- 첫 화면 사용에 가장 적합한 방법: substrate-entry wetting, spreading, anti-cratering, and recoating-aware primer cleanup
- 권장 복용량: 전체 제형의 0.1% ~ 0.5%
- 덧셈 논리: direct addition or dilution before addition
- 주요 강점: one direct route that already combines wetting, anti-cratering, and recoating logic for a waterborne primer stage
In short, WD-D547 is the better first move when the epoxy primer still needs a cleaner surface-entry benchmark before the team decides whether the bigger issue is compatibility or trapped air.
CHLUMIAG® 3467이 더 나은 첫 번째 선택일 때
3467 should move ahead first when the primer can reach the surface, but still shows craters, fisheyes, pullback, or other signs that the real bottleneck is a compatibility-first leveling and anti-cratering problem. This route is stronger when the issue is not simply weak wetting, but unstable film formation after the primer starts laying down.
That distinction matters in waterborne epoxy primers because the underlayer often decides whether the next coat later will be judged as a true finish problem or just an inherited base-layer instability problem. Longchang’s current product page is useful here because 3467 is not positioned only as a feel additive. The supported route keeps together 수준 측량, 반분화구, 기판 습윤, 그리고 compatibility-first logic.
- 첫 화면 사용에 가장 적합한 방법: crater-sensitive and compatibility-led epoxy-primer screening
- Water-based dosage guidance: 0.5% to 5% of total formulation on the current company page
- 주요 강점: one route that already combines anti-cratering, wetting, and system-compatibility logic
- 주요 주의사항: Longchang says this route prioritizes compatibility, so it is best screened when stability comes before finish feel
So 3467 is the better first move when the waterborne epoxy primer still needs a compatibility-first cleanup route before the project moves into a topcoat-facing discussion.
CHLUMICRYL® DF-D9904BR이 더 나은 첫 번째 선택일 때
DF-D9904BR should move ahead first when the waterborne epoxy primer is losing the fight to microbubbles, foam carry-through, or pinholes. In those cases, better wetting or broader compatibility usually will not clean up the panel enough to judge the rest of the package honestly.
Longchang’s product page is direct here. DF-D9904BR is supported specifically to prevent microbubbles and pinholes in the coating film of water-based coatings and inks, and it comes with a process note that matters commercially: the product should enter through a co-solvent step and be added under high shear rather than being treated as a late shortcut.
- 첫 화면 사용에 가장 적합한 방법: persistent microbubbles and pinholes in waterborne epoxy primers
- 복용량 안내: 총 제형의 0.1% ~ 1.0%
- 준비 규칙: use the supported co-solvent-first, high-shear route
- Main reason to shortlist it: it solves a different first problem from wetting or compatibility-first leveling routes
This is the stronger first move when the visible primer defect is being limited by air management, not by a missing wetting route or a broader anti-cratering route.
구매자가 샘플을 요청하기 전에 선택해야 할 사항
1. Start with the real first failure in the primer
If the film still struggles to wet the surface or resists stable early laydown, start with WD-D547. If the primer reaches the surface but still breaks into crater or fisheye behavior, move 3467 forward. If the layer already forms but trapped air still is corrupting the panel read, start with DF-D9904BR.
2. Keep substrate-entry logic separate from compatibility logic
A primer that will not settle on the surface and a primer that settles but then pulls back are not the same additive problem. Separating those routes early usually makes the first sample round cleaner.
3. Keep air-release cleanup separate from both surface routes
Microbubble and pinhole control are not just smaller versions of wetting rescue or crater rescue. If trapped air is still in the primer film, it can distort how the team reads every later additive.
4. Respect the system watchpoints
WD-D547 should be screened as a primer-entry and anti-cratering route. 3467 prioritizes compatibility more than refined feel. DF-D9904BR should not be treated as a late after-add shortcut. Those watchpoints are part of the selection logic, not footnotes.
5. Keep the first trial set small and honest
For many waterborne epoxy-primer projects, the cleanest first plan is one WD-D547 wetting route, 하나 3467 compatibility route그리고 하나 DF-D9904BR bubble-control route. That usually teaches more than forcing several near-neighbor additives into the same opening screen.
이 페이지에서 추천하는 롱창 코스
- Wetting-and-primer-stability route: 클루미크릴® WD-D547
- 호환성 우선 접근 방식: 클루미아그® 3467
- Bubble-control route: 클루미크릴® DF-D9904BR
- 클러스터 개요: 클로미크릴® 코팅 및 잉크 첨가제
- Related broad stage page: How to Choose Additives for Waterborne Primers
- Related later-stage page: How to Choose Additives for Waterborne Epoxy Topcoats
- Related broader application page: 부식 방지 코팅용 첨가제 선택 방법
- Related nearby application page: How to Choose Additives for Waterborne Floor Coatings
- 관련 결함 페이지: How to Choose Additives for Coating Fisheyes
- 관련 결함 페이지: How to Choose Additives for Coating Pinholes
자주 묻는 질문
Which additive should I screen first if a waterborne epoxy primer still will not wet the surface evenly?
Usually WD-D547, because Longchang supports it as a water-system wetting and spreading route that also carries anti-cratering, recoating, and leveling logic for the primer stage.
When should 3467 move ahead of WD-D547?
3467 should move ahead when the primer can already reach the surface but still shows crater-sensitive breakup, fisheyes, or pullback that read more like a compatibility and leveling problem than a simple wetting shortfall.
When does DF-D9904BR make more sense than the other two?
It makes more sense when microbubbles, foam carry-through, or pinholes still dominate the visible defect pattern and the process can follow the recommended co-solvent-first, high-shear addition route.
Is this page the same as the broad waterborne primer page?
No. The broad waterborne primer page still answers the larger primer-stage question across multiple systems. This new page is narrower and helps epoxy-primer buyers choose between substrate-entry wetting, compatibility-first crater cleanup, and water-based bubble control inside an epoxy route.
Need a tighter shortlist?
If your waterborne epoxy-primer project is stuck between poor surface wetting, crater-sensitive film instability, 그리고 microbubble carry-through, stop treating them as the same additive request. Start with the real bottleneck. That usually makes the next CHLUMICRYL® sample decision faster and more commercially useful.