빠른 답변: 구매 담당자가 작업 중입니다 waterborne direct-to-metal primers usually get a cleaner first shortlist when they separate three different jobs instead of asking one additive to rescue every metal-panel defect at once. Start with 클루미크릴® WD-D547 when the primer still needs cleaner metal-surface wetting, spreading, and anti-cratering. Move 클루미아그® 3467 forward when the primer reaches the panel but still shows a compatibility-first crater, fisheye, or pullback problem. Start with 클루미크릴® DF-D9904BR when the real visible blocker is microbubbles, foam carry-through, or pinholes in the water-based primer film.
This page stays inside the redirected 클로미크릴® 코팅 및 잉크 첨가제 direction and does ~ 아니다 fall back to the older photoinitiator cluster. It also is not a duplicate of Longchang’s already-live waterborne primer page or the broader waterborne direct-to-metal coatings page. It answers a narrower B2B question: which additive deserves the first trial when a waterborne DTM primer still is not giving a trustworthy base for the next coat?
Why waterborne direct-to-metal primers deserve their own additive page
A waterborne direct-to-metal primer sits in a tighter buyer lane than either a general waterborne primer page or a broader direct-to-metal coatings page. The primer has to do more than simply reach the metal. It has to leave a stable enough film that the formulator can judge the next coat, corrosion package, or final appearance honestly.
That creates a different first-screen question from a broad DTM article. In practical formulation work, the first additive decision often needs to separate a metal-interface wetting and anti-cratering problem from a compatibility-first film-stability problem, and both from a true water-based air-release problem. Those are not the same first screen, even when the same metal panel trial shows all three symptoms.
General industry framing supports that split conservatively. Waterborne DTM primer work is often judged first by how cleanly the primer wets metal, whether the film stays stable instead of pulling back or cratering, and whether entrained air is still corrupting the primer read before the next layer gets a fair chance. The product-specific facts below still stay tied to current Longchang-supported product pages.
What the current company-supported evidence actually separates
- 클루미크릴® WD-D547 롱창의 지원을 받습니다. 폴리에테르 변성 폴리디메틸실록산 route for 수성 페인트, 용제 함유 페인트 및 용제 미함유 페인트, 자외선 경화 페인트. The current company page directly supports 뛰어난 습윤 및 확산력, says it can 수계에서 표면 장력을 가장 효과적으로 감소시키는 방법, and also keeps together 크레이터 방지, 재코팅, 소포 및 평탄화. Supported dosage is 0.1% ~ 0.5%.
- 클루미아그® 3467 지원됩니다 다성분 변성 폴리실록산 that works across UV, 용매 및 수성 시스템. The company-supported route keeps together 수준 측량, 반분화구, 기판 습윤, and a clear note that it 시스템 호환성을 우선시합니다.. Supported dosage is 0.05% ~ 1.0% of total formulation for solvent systems, 0.5%에서 5%까지 of resin amount for resin modification, and 0.5%에서 5%까지 of total formulation for water-based systems.
- 클루미크릴® DF-D9904BR 지원됩니다 polyether modified polysiloxane compound, silica-free, for 수계 시스템. Longchang directly positions it to prevent microbubbles and pinholes in the coating film of water-based coatings and inks. Supported dosage is 0.1% ~ 1.0%, and the product should be added under high shear, ideally after going into a co-solvent first.
That is enough company-supported separation to build a real buyer page without inventing unsupported direct-to-metal primer claims. The goal is not to pretend one additive solves every metal-primer problem. The goal is to help the buyer choose the first better test route.
간략 비교표: 어떤 경로가 먼저 화면에 나와야 할까요?
| Buyer priority in waterborne DTM primers | 최적의 첫 번째 경로 | 왜 이것이 첫 번째에 있어야 하는가 | 주요 감시 지점 |
|---|---|---|---|
| Poor metal wetting, crater sensitivity, or uneven first-contact laydown on steel or other metal panels | 클루미크릴® WD-D547 | Longchang directly supports water-system surface-tension reduction plus wetting, spreading, anti-cratering, recoating, and leveling | Transparency in varnish scores lower on the product page, so appearance-sensitive clear systems should still be screened carefully |
| The primer reaches the metal but still breaks into crater, fisheye, or pullback behavior that looks compatibility-led | 클루미아그® 3467 | The supported route keeps together compatibility-first logic, anti-cratering, leveling, and substrate wetting | Longchang notes that this route prioritizes compatibility more than refined feel |
| The primer already forms directionally, but trapped air still creates microbubbles or pinholes before topcoat | 클루미크릴® DF-D9904BR | Longchang directly positions it to prevent microbubbles and pinholes in water-based coating films | It is not a casual late after-add, and the supported co-solvent plus high-shear route matters |
When CHLUMICRYL® WD-D547 is the better first move
WD-D547 should move first when the waterborne DTM primer still looks like a metal-entry problem. This is the stronger opening route when the primer hesitates on the panel, spreads unevenly, or keeps showing crater-sensitive behavior that begins right at the interface.
That distinction matters because a DTM primer often has to establish a clean first film on metal before the next coating step can be judged honestly. If the coating still is not reaching the panel in a stable way, later compatibility or bubble-control routes can be harder to read.
- 첫 화면 사용에 가장 적합한 방법: metal-surface wetting, spreading, and anti-cratering
- 권장 복용량: 0.1% ~ 0.5%
- 주요 강점: one route that already combines water-system surface-tension reduction with wetting, spreading, anti-cratering, recoating, defoaming, and leveling support
- 주요 주의사항: the product page’s varnish-transparency score is not the strongest, so clear appearance-sensitive systems still need panel testing
In short, WD-D547 is the better first move when the DTM primer still needs a cleaner metal-contact benchmark before the formulator decides whether the real problem is broader compatibility or air release.
CHLUMIAG® 3467이 더 나은 첫 번째 선택일 때
3467 should move ahead first when the primer can already reach the metal but still shows craters, fisheyes, pullback, or other signs that the bottleneck is a compatibility-first leveling problem. This route is stronger when the issue is not just poor wetting, but unstable film formation after application begins.
That matters in waterborne DTM primers because the primer layer often decides whether the team later is reading a true topcoat problem or just an inherited primer instability. Longchang’s current product page is useful here because 3467 is not positioned only as a feel additive. The supported route keeps together 수준 측량, 반분화구, 기판 습윤, 그리고 system-compatibility logic.
- 첫 화면 사용에 가장 적합한 방법: crater-sensitive and compatibility-led primer screening
- Water-based dosage guidance: 0.5% to 5% of total formulation on the current company page
- 주요 강점: one route that already combines anti-cratering, wetting, and compatibility-first logic
- 주요 주의사항: Longchang says this route prioritizes compatibility, so it is best screened when stability matters more than refined feel
So 3467 is the better first move when the DTM primer still needs a compatibility-first cleanup route before the project moves into topcoat or broader anti-corrosion evaluation.
CHLUMICRYL® DF-D9904BR이 더 나은 첫 번째 선택일 때
DF-D9904BR should move ahead first when the waterborne DTM primer is losing the fight to microbubbles, foam carry-through, or pinholes. In those cases, better wetting or broader compatibility usually will not clean up the panel enough to judge the rest of the package honestly.
Longchang’s product page is direct here. DF-D9904BR is supported specifically to prevent microbubbles and pinholes in the coating film of water-based coatings and inks, and it carries a process note that matters commercially: the product should enter through a co-solvent step and be added under high shear rather than treated as a late shortcut.
- 첫 화면 사용에 가장 적합한 방법: persistent microbubbles and pinholes in waterborne DTM primers
- 복용량 안내: 총 제형의 0.1% ~ 1.0%
- 준비 규칙: use the supported co-solvent-first, high-shear route
- Main reason to shortlist it: it solves a different first problem from metal wetting or compatibility-first crater cleanup
This is the stronger first move when the visible primer defect is being limited by air management, not by a missing wetting route or a broader anti-cratering route.
구매자가 샘플을 요청하기 전에 선택해야 할 사항
1. Start with the real first failure on metal
If the film still struggles to wet the panel and keep a stable first-contact laydown, start with WD-D547. If the primer reaches the panel but then breaks into crater or fisheye behavior, move 3467 forward. If the layer already forms but trapped air still is corrupting the film read, start with DF-D9904BR.
2. Keep interface wetting separate from compatibility cleanup
A primer that will not wet metal and a primer that wets but then pulls back are not the same additive problem. Separating those routes early usually makes the first trial set more honest.
3. Keep air-release control separate from both surface routes
Microbubble and pinhole control are not just smaller versions of wetting rescue or crater rescue. If trapped air is still sitting in the primer film, it can distort how the team reads every later additive.
4. Respect the watchpoints on each route
WD-D547 is the strongest first screen when metal wetting and anti-cratering belong together. 3467 prioritizes compatibility more than feel. DF-D9904BR should not be treated as a late after-add shortcut. Those watchpoints are part of the selection logic, not a footnote.
5. Keep the first trial set small
For many waterborne DTM primer projects, the cleanest first plan is one WD-D547 wetting route, 하나 3467 compatibility route그리고 하나 DF-D9904BR bubble-control route. That usually teaches more than forcing several near-neighbor additives into the same first screen.
이 페이지에서 추천하는 롱창 코스
- Metal-wetting route: 클루미크릴® WD-D547
- 호환성 우선 접근 방식: 클루미아그® 3467
- Bubble-control route: 클루미크릴® DF-D9904BR
- 클러스터 개요: 클로미크릴® 코팅 및 잉크 첨가제
- Related stage page: How to Choose Additives for Waterborne Primers
- Related substrate page: How to Choose Additives for Waterborne Direct-to-Metal Coatings
- 관련 클러스터 페이지: 부식 방지 코팅용 첨가제 선택 방법
- 관련 결함 페이지: How to Choose Additives for Coating Fisheyes
- 관련 결함 페이지: How to Choose Additives for Coating Pinholes
자주 묻는 질문
Which additive should I screen first if a waterborne DTM primer still will not wet metal evenly?
Usually WD-D547, because Longchang directly supports it around water-system surface-tension reduction, wetting, spreading, and anti-cratering, which match the first-contact metal problem more directly than a compatibility-only or bubble-only route.
When should 3467 move ahead of WD-D547?
3467 should move ahead when the primer already reaches the metal but still shows crater-sensitive breakup, fisheyes, or pullback that read more like a compatibility and leveling problem than a simple wetting shortfall.
When does DF-D9904BR make more sense than the other two?
It makes more sense when microbubbles, foam carry-through, or pinholes still dominate the visible defect pattern and the process can follow the recommended co-solvent-first, high-shear incorporation route.
Is this page the same as the broader waterborne direct-to-metal coatings page?
No. The broader DTM page still answers the substrate-level selection question first. This new page is narrower and helps primer-stage buyers decide whether the first problem is metal wetting and anti-cratering, compatibility-first film stability, or water-based air release before topcoat.
다음 단계
If your waterborne direct-to-metal primer project is stuck between poor metal wetting, crater-sensitive film instability, 그리고 microbubble carry-through, stop treating them as the same additive request. Start with the real bottleneck first. That usually makes the next CHLUMICRYL® sample decision faster and more commercially useful.