빠른 답변: 구매자 선택 additives for shrink sleeve inks usually get a faster first shortlist when they separate three different additive jobs instead of asking one product to solve every packaging-print problem at once. CHLUMIWE® 2100 should move first when the main issue is film-surface wetting, spread, or cleaner laydown on shrink-sleeve film. 클루미아그® 3501 deserves earlier review when the buyer needs a broader 달라붙지 않음, sleeve-web handling, 또는 downstream converting compatibility route. CHLUMIAF® 3062 belongs earlier when the system already looks directionally right but foam, entrained air, or circulation-side instability keeps undermining production or print quality.
That is the commercially useful split. This page is not another general label-ink overview. It is a narrower CHLUMICRYL® application page 이미 해당 프로젝트에 대해 알고 있는 구매자의 경우 shrink sleeve ink job and need a clearer first screen before requesting samples.
Why shrink sleeve inks deserve their own additive page
롱창은 이미 라이브 페이지를 운영하고 있습니다. label ink additives, flexographic ink additives, gravure ink additives, inkjet ink additives, 그리고 metal packaging ink additives. Those pages solve broader label, process, or substrate questions.
A shrink-sleeve project creates a tighter buyer question: is the first additive decision mainly about getting the ink to wet and spread on shrink film, about improving print-side handling and anti-blocking during rewinding and converting, or about suppressing foam and trapped air during manufacture and press use? That is a different application question because sleeve work usually combines film surfaces, tight winding and handling windows, and pressure to keep the printed web stable before the sleeve is finally applied.
The broader industry framing here is conservative. External shrink-sleeve and packaging-ink references commonly separate film wetting, slip / blocking / scuff-sensitive handling, 그리고 efficient defoaming as different formulation jobs instead of one single additive decision. The product-specific facts below still stay tied to current Longchang-supported product pages.
현재 회사에서 제공하는 사실들이 이미 구분 짓고 있는 것은 무엇인가?
- CHLUMIWE® 2100 롱창의 지원을 받습니다. 인쇄 잉크, 오버프린트 바니시, 그리고 잉크젯 잉크, with recommended dosage at 0.1% ~ 1.0%, addition during grinding, stirring, 또는 after production, optional solvent pre-dilution, and applicability across UV, 용제, 그리고 수계 시스템.
- 클루미아그® 3501 롱창의 지원을 받습니다. 다성분 변성 폴리실록산 that can be added at any stage and used across UV, 용제, 그리고 수계 시스템. The current company-supported page directly lists 인쇄 잉크, 잉크젯 잉크, 오버프린트 바니시, 이형 코팅, 그리고 anti-sticking-agent use.
- CHLUMIAF® 3062 입니다 소포제 우선 투여 방식롱창은 이를 지지합니다. 인쇄 잉크 권장 복용량과 함께 0.1% ~ 0.5% of total formulation, broad UV, 용제, 그리고 수성 applicability, and the practical watchpoint that if solvent dilution is used, stability and defoaming performance should be tested first.
That is enough product-level separation to build a real shortlist for shrink sleeve inks without inventing unsupported packaging claims.
간략 비교표: 어떤 경로가 먼저 화면에 나와야 할까요?
| Buyer priority in shrink sleeve inks | 최적의 첫 번째 경로 | 왜 이것이 첫 번째에 있어야 하는가 | 주요 감시 지점 |
|---|---|---|---|
| Poor shrink-film contact, weak spread, or a drawdown that still looks like a wetting-first problem | CHLUMIWE® 2100 | Longchang directly lists printing inks and overprint varnishes on the product page and supports broad system fit with flexible addition timing | Keep the screening job focused on wetting and spread instead of expecting one additive to solve every downstream web-handling issue |
| Broader anti-sticking pressure, print-face handling, or sleeve-web converting compatibility after printing | 클루미아그® 3501 | The product page directly combines printing-ink use with overprint varnishes, release coatings, and anti-sticking-agent positioning | Because it is a broader compatibility route, define the real KPI before screening so the result stays interpretable |
| Persistent foam, entrained air, or circulation-side instability during ink manufacture, letdown, or printing | CHLUMIAF® 3062 | Longchang directly supports it as a printing-ink defoamer with a dedicated dosage window and broad system applicability | If solvent dilution is used, stability and defoaming performance should be checked before scale-up |
When CHLUMIWE® 2100 is the better first move
2100 should move to the front when the shrink-sleeve project still looks like a wetting and spread problem. This is often the cleaner first route when the printed film surface is not accepting the ink the way the team expects, the drawdown still shows weak first contact, or the lab needs a simpler benchmark before moving into broader anti-blocking and handling tradeoffs.
The current Longchang page gives 2100 a useful operating window for that job. It supports 0.1% ~ 1.0% dosage, can be added during grinding, stirring, or after production, and can be diluted with 물, 알코올, 알칸 및 방향족 화합물. The same page directly lists 인쇄 잉크 및 오버프린트 바니시 among its application scenarios.
- 첫 화면 사용에 가장 적합한 방법: shrink-film wetting, spread, and initial laydown screening
- 복용량 안내: 총 제형의 0.1% ~ 1.0%
- 시스템 호환성: UV, 용매 및 수성 시스템
- Commercial reason to shortlist it: it gives a cleaner first answer when the buyer still needs basic film contact to improve before testing broader anti-sticking or foam-control routes
In short, 2100 is the better first move when the real question is still how the ink meets the shrink-sleeve film.
When CHLUMIAG® 3501 is the better first move
3501 deserves earlier review when the project is no longer only about first contact. It is the stronger route when the buyer needs a broader 달라붙지 않음, release-oriented, 또는 print-side compatibility path that can still sit naturally inside a shrink-sleeve ink branch.
The current Longchang page is clear here. 3501 is not only listed for 인쇄 잉크; it is also publicly positioned for 잉크젯 잉크, 오버프린트 바니시, 이형 코팅, 그리고 anti-sticking-agent use. It can be added at any stage and used across UV, 용제, 그리고 수계 시스템.
- 첫 화면 사용에 가장 적합한 방법: broader sleeve-web handling questions, including anti-sticking, print-face release behavior, and converting-adjacent compatibility
- 덧셈 논리: can be added at any stage or later
- 시스템 호환성: UV, 용매 및 수성 시스템
- Commercial reason to shortlist it: it is the cleaner route when the buyer needs a wider print-and-converting compatibility path instead of only a wetting correction
That makes 3501 the better first move when the problem sits more in rewind handling, downstream compatibility, or print-face anti-sticking behavior than in basic spread.
When CHLUMIAF® 3062 is the better first move
3062 should move first when the shrink-sleeve ink project already has a plausible wetting route but the system keeps failing because of 거품, 혼입된 공기, 또는 poor process stability. That is a different job from improving first contact or tuning print-side handling. It is also one that can waste a lot of development time if the team keeps screening more surface additives before solving the foam problem.
Longchang supports 3062 as a 폴리에테르 변성 폴리실록산 defoamer for 인쇄 잉크, with a recommended dosage at 0.1% ~ 0.5% of total formulation and applicability across UV, 용제, 그리고 수계 시스템. The product page also adds a practical note: if solvent dilution is used, the team should first verify stability and defoaming performance.
- 첫 화면 사용에 가장 적합한 방법: foam control, air-release management, and process-side stability in shrink-sleeve ink workflows
- 복용량 안내: 전체 제형의 0.1% ~ 0.5%
- 시스템 호환성: UV, 용매 및 수성 시스템
- 주요 주의사항: test solvent-dilution stability before scale-up if dilution is part of the process plan
So 3062 is the better first move when the project is being limited by gas management, not by missing wetting or print-side compatibility.
구매자가 샘플을 요청하기 전에 선택해야 할 사항
1. Start with the first visible bottleneck
If the shrink film still is not accepting the ink cleanly, start with 2100. If the real issue is broader anti-sticking, handling, or downstream converting compatibility, move 3501 earlier. If the project is already being damaged by foam or trapped air, move 3062 up.
2. Keep the sleeve workflow visible
This page is intentionally narrower than the broader label-ink page. A shrink-sleeve job has more film-specific pressure around web handling, winding, and keeping the printed sleeve practical before final application. That makes the first additive screen more application-specific than a general label page.
3. Do not force a defoamer into a wetting job
If the buyer has not yet solved basic film contact, a wetting-first route usually teaches more than jumping straight to a defoamer. The opposite is also true: once the real problem is foam and air release, a new wetting additive may only add noise to the first screen.
4. Use the watchpoint, not only the headline benefit
2100 is broad, but that does not mean it is the best first route for every downstream issue. 3501 offers a wider handling and compatibility route, but the KPI still needs to stay clear. 3062 can be diluted, but the team should verify stability and defoaming first. Those practical notes often decide the better first sample more than the product family name.
5. 첫 라운드를 꽉 조여라
For many buyers, one wetting route, 하나 broader sleeve-handling compatibility route그리고 하나 소포제 우선 투여 방식 teach more than screening too many nearby additives at once.
이 페이지에서 추천하는 롱창 코스
- 클러스터 개요: 클로미크릴® 코팅 및 잉크 첨가제
- 관련 애플리케이션 페이지: How to Choose Additives for Label Inks
- Related process page: 플렉소그래픽 잉크용 첨가제 선택 방법
- Related process page: 그라비아 잉크용 첨가제 선택 방법
- Related varnish page: How to Choose Additives for Waterborne Overprint Varnishes
- 관련 릴리스 페이지: UV 잉크 및 오버프린트 바니쉬용 이형 코팅 첨가제 선택 방법
- 2100 product page: CHLUMIWE® 2100
- 3501 product page: 클루미아그® 3501
- 3062 product page: CHLUMIAF® 3062
자주 묻는 질문
Which additive should I screen first if a shrink sleeve ink is not spreading cleanly?
Usually CHLUMIWE® 2100, because it is the cleaner wetting-first benchmark when the real problem is shrink-film contact and spread.
When should 3501 move ahead of 2100?
3501 should move ahead when the ink already wets reasonably well but the project still needs a broader anti-sticking, handling, or downstream converting compatibility route.
When should 3062 move ahead of the other two?
3062 should move ahead when persistent foam, entrained air, or process-side instability is the main barrier to acceptable print quality or manufacturing stability.
Can one of these additives solve every shrink sleeve ink issue?
No. Their supported first-screen logic is different enough that buyers should not treat them as interchangeable. The faster route is to identify whether the problem starts at wetting, web handling, or foam control.
Need a faster shortlist for shrink sleeve inks?
팀이 다음과 같은 상황에 처해 있다면 film-surface wetting, print-side anti-sticking and sleeve-web handling, 그리고 거품 조절, define the real first-screen job before requesting samples. That usually shows much faster whether CHLUMIWE® 2100, CHLUMIAG® 3501, or CHLUMIAF® 3062 deserves the first round.