빠른 답변: 구매 담당자가 작업 중입니다 캔 코팅 usually get a cleaner first shortlist when they separate three different jobs instead of asking one additive to solve every surface problem at once. CHLUMIFE® 3166 should move first when the main target is a 보다 광범위한 표면 균형 경로 across wetting, smoothness, gloss, anti-blocking, and scratch support. 클루미아그® 3467 deserves earlier review when the system is more compatibility-sensitive and the first question is whether a leveling and anti-cratering route can clean up the film without narrowing the formulation window too quickly. 클루미페® 3307X 코팅이 이미 적절하게 형성된 시점보다 더 이른 시기에 시공해야 합니다. 경화된 필름은 여전히 더 강력한 긁힘 또는 마모 저항성이 필요합니다. 및 재도장 가능성은 여전히 중요합니다..
That is the commercially useful split. This page is not another broad coatings-additives overview. It is a narrower CHLUMICRYL® application page for buyers who already know the project is a metal-packaging or can-coating job and need a faster first screen.
Why can coatings deserve their own additive page
롱창은 이미 라이브 페이지를 운영하고 있습니다. 클로미크릴® 코팅 및 잉크 첨가제, 코일 코팅 첨가제, anti-corrosion coating additives, 수평 조절 첨가제, 그리고 긁힘 방지 첨가제. Those pages solve broader buyer questions.
A can-coating project creates a narrower one: should the first additive screen focus on broad surface balance, compatibility-first defect control, or final-film scratch and recoat performance? That is a different decision from a general industrial-coating page because metal-packaging buyers often care about smooth laydown, crater control on metal surfaces, blocking or scuff risk during handling, and whether later coating or overprint steps still stay practical.
That broader industry framing is used here only as conservative application context. The product-specific facts below stay tied to current Longchang-supported product pages.
이 세 가지 경로의 차이점은 무엇일까요?
- CHLUMIFE® 3166 롱창은 이 제품을 다음과 같이 포지셔닝하고 있습니다. 폴리에테르 변성 폴리오르가노실록산 used to control surface tension, with supported gains around 탁월한 건조감, 기판 습윤성, 표면 평활도, 긁힘 방지, 안티블로킹, 수준 측량, 그리고 광택 개선. The page supports use in UV, 용매 및 수성 시스템.
- 클루미아그® 3467 롱창은 이 제품을 다음과 같이 포지셔닝하고 있습니다. 다성분 변성 폴리실록산 that prioritizes 시스템 호환성. Its current company-supported route includes 수준 측량, 반분화구, 기판 습윤, and flexible use either as a direct coating additive or during polyurethane resin modification. The page supports use in UV, 용매 및 수성 시스템.
- 클루미페® 3307X 더 구체적인 것은 cured-film scratch and abrasion route. Longchang explicitly supports it around improving 필름 형성 후 내마모성 및 내스크래치성, along with 표면 평활도, 수준 측량그리고 재도장 가능성 우선 position. Its current company page supports UV 및 용매 시스템, not water-based systems.
That is enough separation to justify a real buyer-selection page instead of sending every can-coating team back to a generic additive hub.
간략 비교표: 어떤 경로가 먼저 화면에 나와야 할까요?
| Buyer priority in can coatings | 최적의 첫 번째 경로 | 왜 이것이 첫 번째에 있어야 하는가 | 주요 감시 지점 |
|---|---|---|---|
| Broader surface balance across wetting, smoothness, gloss, anti-blocking, and scratch support | CHLUMIFE® 3166 | Longchang supports it as a broader surface-control route across UV, solvent, and water-based systems | May cause pinholes or whitening and may stabilize foam, so risk checks should stay visible early |
| Compatibility-first anti-cratering, leveling, and wetting control in a more defect-sensitive formulation | 클루미아그® 3467 | Longchang positions it around compatibility-first use, anti-cratering, and flexible direct-add or resin-modification routes | Feel is not its main strength when compared with more feel-led options |
| Cured film still scratches or abrades too easily and recoatability still matters | 클루미페® 3307X | Longchang explicitly ties it to scratch and abrasion resistance after film formation with recoatability priority | Non-water-based only, and solvent pre-dilution is recommended before use |
CHLUMIFE® 3166이 더 나은 첫 번째 선택일 때
3166 should move first when the can-coating project is still balancing more than one surface KPI at once. Longchang’s current product page is clear that this route is not only about one narrow defect. It highlights 탁월한 건조감, 기판 습윤성, 표면 평활도, 긁힘 방지, 안티블로킹, 수준 측량, 그리고 광택 개선. The page supports a recommended dosage of 0.05% to 1.0% of total formulation and says it can be added at any stage of production, with optional solvent dilution for easier addition.
That makes 3166 commercially useful when the team is not only chasing crater cleanup or only post-cure durability. It is often the better first route when the buyer wants one broader benchmark that helps answer whether the can coating still needs stronger wetting, smoother laydown, safer anti-blocking balance, and better surface feel together.
- 시스템 호환성: UV, 용매 및 수성 시스템
- 주요 강점: broader balance instead of one narrow function
- 주요 주의사항: Longchang explicitly flags possible 핀홀, 호분그리고 거품 안정화 효과, so defoamer planning may still be needed during testing
In short, 3166 is the cleaner first screen when the project needs a broad answer before the team narrows into a more specialized route.
CHLUMIAG® 3467이 더 나은 첫 번째 선택일 때
3467 deserves earlier review when the formulation window looks more compatibility-sensitive and the first question is whether a leveling and anti-cratering route can solve the surface problem without forcing the lab into a less tolerant package too early. Longchang supports 3467 as a 다성분 변성 폴리실록산 and explicitly says the product 시스템 호환성을 우선시합니다..
The current company page also supports multiple practical routes. For coating modification, it can be added directly or diluted with a suitable solvent. For polyurethane modification, it can be added with the polyol during prepolymerization or added later. Longchang’s supported dosage windows are 0.05% ~ 1% of the total formulation for solvent-based systems, 0.5%에서 5%까지 of the resin amount for resin modification, and 0.5%에서 5%까지 of the total formulation for water-based systems.
- 시스템 호환성: UV, 용매 및 수성 시스템
- 주요 강점: compatibility-first route with anti-cratering, leveling, and wetting support
- 주요 주의사항: the product page says its feel is slightly less refined, so it should not be the automatic first choice when premium hand feel is the main target
That makes 3467 a strong first screen when crater control, formulation tolerance, and practical addition flexibility matter more than a more feel-led route.
CHLUMIFE® 3307X가 더 나은 첫걸음이 될 때
3307X becomes more relevant when the can coating already lays down acceptably but the final cured film still marks, scratches, or abrades too easily. Longchang’s product page is explicit that this route is designed to improve 필름 형성 후 내마모성 및 내스크래치성같은 페이지에서도 다음 기능을 지원합니다. 표면 평활도, 수준 측량그리고 재도장 가능성 우선 위치.
That creates a meaningful buyer split. Some can-coating projects do not fail first on wet-stage flow. They fail later when the coated metal surface still needs stronger damage resistance while keeping later processing practical. Longchang supports a recommended dosage of 0.1% to 1.0% of total formulation and says the product should be diluted to 12.5% with solvent before use.
- 시스템 호환성: UV and solvent systems only
- 주요 강점: cured-film scratch and abrasion route with recoatability priority
- 주요 주의사항: it is not a water-based route, and solvent pre-dilution should be built into the test plan
So 3307X is the better first move when the buyer is judging the final film, not only the wet film.
구매자가 샘플을 요청하기 전에 선택해야 할 사항
1. 실패의 실제 단계부터 시작하세요
If the project still needs a broad answer across wetting, smoothness, blocking, and gloss, start with 3166. If the bigger risk is crater control and compatibility, move 3467 earlier. If the film looks acceptable at application but still fails under scratch or abrasion pressure, move 3307X up.
2. Keep system boundary visible
3166 and 3467 both sit inside Longchang’s supported UV, solvent, and water-based windows. 3307X does not. That alone helps keep the first shortlist disciplined.
3. Do not treat overlap as interchangeability
All three routes touch appearance or surface performance. That does not make them interchangeable. The supported first-screen logic is different for each one.
4. Use the watchpoint, not only the headline benefit
3166 brings pinhole, whitening, and foam-stabilization risk. 3467 prioritizes compatibility but not the best feel. 3307X needs solvent pre-dilution and belongs in non-water-based screening. Those practical notes often decide the better first sample more than the product family name.
5. 첫 라운드를 꽉 조여라
For many can-coating teams, one 보다 광범위한 표면 균형 경로, 하나 compatibility-first anti-cratering route그리고 하나 cured-film scratch route teach more than an overloaded first panel with too many partially overlapping additives.
이 페이지에서 추천하는 롱창 코스
- 클러스터 개요: 클로미크릴® 코팅 및 잉크 첨가제
- Related metal-coating application page: 코일 코팅용 표면 첨가제 선택 방법
- 관련 보호 코팅 페이지: 부식 방지 코팅용 첨가제 선택 방법
- 관련 기능 페이지: 코팅 및 잉크용 평활 첨가제 선택 방법
- 내구성 관련 페이지: 코팅 및 잉크용 내스크래치성 첨가제 선택 방법
- 3166 제품 페이지: CHLUMIFE® 3166
- 3467 product page: 클루미아그® 3467
- 3307X 제품 페이지: 클루미페® 3307X
자주 묻는 질문
Which additive should I screen first if the can coating problem is still broad?
Usually CHLUMIFE® 3166, because Longchang supports it as a broader surface-control route across wettability, smoothness, anti-blocking, scratch support, leveling, and gloss.
When should 3467 move ahead of 3166?
3467 should move ahead when compatibility and anti-cratering pressure matter more than a broader feel-led package, or when the project needs the practical option of direct coating modification or resin-modification use.
3307X는 언제 다른 두 종목을 앞서나가야 할까요?
3307X should move ahead when the coating already lays down acceptably but the cured film still needs stronger scratch or abrasion resistance and recoatability remains important.
Are these three products interchangeable in can coatings?
No. Their supported system windows, first-screen logic, and risk notes are different enough that buyers should not treat them as drop-in substitutes.
Need a faster shortlist for can coatings?
If your can-coating project is stuck between broader surface balance, compatibility-first crater control, 그리고 cured-film scratch resistance, define the real first-screen job before requesting samples. That usually shows much faster whether CHLUMIFE® 3166, CHLUMIAG® 3467, or CHLUMIFE® 3307X deserves the first round.