Deskripsi
Product Overview
CHLUMICRYL® WPU-5110 is a coating binder for balancing surface appearance, flexibility and liquid resistance. Its polycarbonate-based polyurethane dispersion forms a level, glossy film and is suitable for metal, plastic, glass, natural leather and synthetic leather finishes. The liquid has low viscosity, specified at no more than 100 mPa·s at 30 °C. Film data include water absorption of 6-10% after 24 hours at 25 °C. Where additional water resistance is required, a compatible curing system may be evaluated. Confirm crosslinker selection, dosage, pot life and the required alcohol-rub procedure in formulation trials.
Grade Characteristics
- Glossy, medium-hard film
- Film flexibility and bending resistance
- Water, solvent and rub resistance
Technical Data
| Properti | Nilai |
|---|---|
| Brand and grade | CHLUMICRYL® WPU-5110 |
| Penampilan | Semi-transparent to milky liquid with a blue tint |
| Kandungan padatan | 30 ± 1% |
| pH | 6.0-8.0 |
| Modulus | 2.0-4.0 MPa |
| Viscosity at 30 °C | ≤ 100 mPa·s |
| Tensile strength | ≥ 30 MPa |
| Elongation at break | ≥ 300% |
| Water absorption, 24 h at 25 °C | 6-10% |
| Ionic type | Anionic |
These values are technical selection data, not a batch-specific certificate of analysis. Test methods, current specifications and any acceptance limits should be confirmed before ordering.
Aplikasi
- Metal coatings
- Plastic coatings
- Glass coatings
- Natural leather finishing
- Synthetic leather finishing
Formulation and Handling
Screen compatible curing agents when greater water resistance is required.
The indicated curing-agent trial range is approximately 1-5%; confirm the dosage basis, agent type and pot life before use.
Mix a validated two-component formulation thoroughly and use within its established working time.
- The modulus is not identified as a 100% modulus.
- Alcohol-rub performance requires an agreed alcohol concentration, load, cure schedule and test method; no universal cycle count is guaranteed.
Check binder compatibility, substrate preparation, application conditions and final coating or bond performance in your own formulation. Waterborne use does not by itself establish solvent-free status or a hazard classification. Consult the current safety data sheet and use appropriate industrial handling controls.
Pengemasan dan Penyimpanan
50 kg or 120 kg plastic drums.
Store at 5-30 °C in a cool, dry, well-ventilated place. Protect from freezing and light. Stated shelf life: 12 months under these conditions.
Request Technical Information or a Sample
Contact Longchang Chemical with the intended substrate, formulation system, process conditions and required performance. Ask for the current TDS, SDS, sample availability and quotation using the inquiry form below or email info@longchangchemical.com.
