Réponse rapide : acheteurs travaillant sur waterborne plastic primers usually get a better first shortlist when they separate three different jobs instead of treating every additive as a generic surface-control aid. CHLUMIWE® 3071 devrait intervenir en premier lorsque le problème principal est mouillage de substrat difficile, first-contact spread, and early film entry on plastic surfaces. CHLUMIAG® 3467 deserves earlier review when the primer still looks compatibility-sensitive and needs a compatibility-first route for anti-cratering, substrate wetting, and leveling. CHLUMICRYL® DF-D9904BR belongs earlier when the waterborne primer is carrying microbubbles, pinholes, or trapped-air marks that make it hard to read the real surface result before topcoat.
That is the commercially useful split. This page is pas a duplicate of the already-live waterborne primer additives page, and it is not the same job as the broader waterborne plastic coating additives page. This new article sits in the narrower window where the project is specifically a waterborne primer on plastic substrates and the team needs a faster first screen before it moves into the topcoat stage.
Why waterborne plastic primers deserve their own additive page
Waterborne plastic primers live at the intersection of two hard variables. First, the substrate can be harder to wet cleanly than a more forgiving surface. Second, the coating stage is still a primer stage, which means the team usually is trying to stabilize entry, crater control, leveling, and air-release behavior before it asks the finish layer to do the beauty work.
That makes this page different from two nearby live routes:
- Waterborne primer additives is the broader stage page for waterborne primers across substrates.
- Waterborne plastic coating additives is the broader substrate page for waterborne plastic coatings, including later surface-read questions such as finish smoothness and dry feel.
This page is narrower than both. It answers the more specific buyer question: when a waterborne plastic primer still is not entering, leveling, or releasing air cleanly enough before topcoat, which additive deserves the first sample round?
What the current company-supported evidence actually separates
- CHLUMIWE® 3071 is supported by Longchang as a polysiloxane modifié par un polyéther wetting agent for Systèmes à base d'UV, de solvants et d'eau. The current company page supports very low dynamic surface tension, a recommended dosage of 0,1% à 1,0%, and a caution that it may have a foam-stabilizing effect in water-based systems. That makes it a practical first route when the plastic primer still is not entering the substrate cleanly enough.
- CHLUMIAG® 3467 is supported by Longchang as a polysiloxane modifié multicomposant that priorise la compatibilité du système. The company page directly supports anti-cratérisation, mouillage du substratet leveling, including use for polyurethane modification or direct coating modification. It is supported across Systèmes à base d'UV, de solvants et d'eau. That makes it a better first route when the waterborne plastic primer still looks compatibility-sensitive rather than just under-wet.
- CHLUMICRYL® DF-D9904BR is supported by Longchang as a foam-suppressing and defoaming agent pour systèmes à base d'eau. The company page directly supports control of microbulles, mousseet pinhole / fish-eye reduction, avec une dose recommandée de 0,1% à 1,0%. That makes it the more useful first route when trapped air, not wetting or compatibility, is the real blocker.
That is enough company-supported separation to build a real buyer page. External industry framing is used only conservatively for the normal waterborne-plastic-primer reality that low-surface-energy substrates and water carry-through often make labs sort the problem into surface entry, compatibility-first defect cleanupet air-release cleanup before they worry about final-finish cosmetics.
Tableau comparatif rapide : quel itinéraire mérite la première place ?
| Buyer priority in waterborne plastic primers | Meilleur premier itinéraire | Pourquoi cela devrait être la première chose à faire | Point de surveillance principal |
|---|---|---|---|
| Difficult-substrate wetting, first-contact spread, and lower surface-tension entry on plastic surfaces | CHLUMIWE® 3071 | Longchang supports very low dynamic surface tension and multi-system wetting use, which makes it a strong first route when the primer still is not entering the surface cleanly | In water-based systems, Longchang warns that it may stabilize foam |
| Compatibility-first anti-cratering, substrate wetting, and leveling in a more formulation-sensitive plastic primer package | CHLUMIAG® 3467 | Longchang explicitly prioritizes system compatibility and directly supports anti-cratering, wetting, and leveling | The feel is not the main reason to choose it, and it should not be treated as a finish-led route |
| Water-based microbubble, foam, and pinhole cleanup when trapped air is distorting the primer film | CHLUMICRYL® DF-D9904BR | Longchang directly supports microbubble and foam suppression in water-based systems and ties it to pinhole control | It solves air-release problems, not fundamental substrate-entry or compatibility problems |
Quand CHLUMIWE® 3071 est le meilleur premier choix
3071 should move first when the waterborne plastic primer still is failing at first contact. In real screening work, this usually appears as poor spread, hesitant substrate entry, or a primer film that still is not laying onto the plastic surface with enough confidence to judge the rest of the package.
Longchang supports 3071 as an agent mouillant organosilicone with very low dynamic surface tension and multi-system fit. That is why it makes sense earlier than a broader defect-control route when the central question is still, can this primer enter the plastic surface cleanly enough to start the rest of the job?
- Supported strengths: strong wetting route, low dynamic surface tension, water-based compatibility
- Recommended dosage: 0,1% à 1,0% de la formulation totale
- Addition logic: can be added during grinding, stirring, or after production
- Main caution: Longchang notes possible foam stabilization in water-based systems, so keep an air-release check visible if that risk is already showing up
In short, 3071 is the cleaner first screen when the lab needs plastic-surface entry before it needs a stronger compatibility or defoaming route.
Quand CHLUMIAG® 3467 est le meilleur premier pas
3467 should move earlier when the waterborne plastic primer looks compatibility-sensitive and the team needs more than raw wetting help. Longchang’s current product page is especially useful here because it does not describe 3467 only as a general leveling additive. It explicitly says the product priorise la compatibilité du système and directly supports anti-cratering, substrate wetting, and leveling.
That matters for waterborne plastic primers. Sometimes the lab can already make the primer touch the plastic surface, but the film still looks unstable, crater-prone, or inconsistent enough that a broader compatibility-first route is the smarter first benchmark. That is where 3467 earns its place.
- Supported strengths: compatibility-first anti-cratering, substrate wetting, and leveling
- Supported addition logic: can be used in polyurethane-modification style routes or added directly to the coating system
- System fit: Systèmes à base d'UV, de solvants et d'eau
- Main caution: this is not the route to choose mainly for finish feel or final tactile aesthetics
So 3467 is the better first benchmark when the project has moved beyond simple under-wetting and now needs a compatibility-first plastic-primer cleanup route.
Quand CHLUMICRYL® DF-D9904BR est le meilleur premier choix
DF-D9904BR should move first when trapped air is the problem that keeps confusing the primer read. In waterborne plastic primers, that often means microbulles, foam carry-through, pinhole marks, or a film surface that looks more defect-heavy than it really is because air-release still is not under control.
Longchang supports DF-D9904BR directly for systèmes à base d'eau, and the current company page specifically supports microbubble control, suppression de mousseet pinhole / fish-eye reduction. That makes it the practical first move when the lab should stop blaming wetting or leveling first and fix the air problem.
- Supported strengths: water-based defoaming, microbubble cleanup, pinhole reduction
- Recommended dosage: 0,1% à 1,0% de la formulation totale
- System fit: systèmes à base d'eau
- Main caution: it should not be treated as a substitute for a stronger wetting or compatibility-first route when the plastic surface still is not being entered correctly
That makes DF-D9904BR the cleaner first route when the waterborne plastic primer already can wet directionally, but trapped air still is destroying the panel read.
Comment les acheteurs doivent-ils choisir avant la première série d'échantillons ?
1. Start with the real first failure
If the primer still is not entering the plastic surface cleanly, start with 3071. If the film looks compatibility-sensitive and crater-prone, move 3467 earlier. If air-release and microbubble marks are the real blocker, move DF-D9904BR first.
2. Do not collapse wetting and compatibility into the same decision
3071 and 3467 both can touch surface behavior, but they do not solve the same first problem. One is the cleaner route for difficult surface entry. The other is the cleaner route for compatibility-first crater and leveling cleanup.
3. Keep waterborne foam behavior visible
3071 may stabilize foam in water-based systems, while DF-D9904BR is the route built to clean that up. That interaction alone can save time in the first panel round.
4. Judge the primer as a primer
This page is about getting a cleaner primer film before topcoat, not about forcing a finish-layer tactile story too early. If the lab still is working on entry, crater control, or air-release, solve those first.
5. Keep the first round tight
For many waterborne plastic primer projects, one surface-entry route, un compatibility-first defect routeet un air-release route teach more than a crowded panel packed with near-neighbor additives.
Itinéraire recommandé pour Longchang à partir de cette page
- Aperçu du cluster : CHLUMICRYL® Additifs pour revêtements et encres
- Related stage page: How to Choose Additives for Waterborne Primers
- Related substrate page: How to Choose Additives for Waterborne Plastic Coatings
- Related diagnosis page: Additifs mouillants vs additifs de nivellement vs antimousses vs tensioactifs fluorés dans les revêtements et les encres
- 3071 product page: CHLUMIWE® 3071
- 3467 product page: CHLUMIAG® 3467
- DF-D9904BR product page: CHLUMICRYL® DF-D9904BR
FAQ
Which additive should I screen first if my waterborne plastic primer still is not wetting the surface cleanly?
Usually CHLUMIWE® 3071, because Longchang supports it as a low-surface-tension wetting route across water-based systems.
When should 3467 move ahead of 3071?
3467 should move ahead when the primer problem is no longer just entry onto the plastic surface, and the real issue is compatibility-first crater cleanup, wetting stability, and leveling balance inside a more sensitive formulation window.
When does DF-D9904BR make more sense than the other two?
It makes more sense when microbubbles, foam, pinholes, or trapped-air defects are the main reason the primer panel still looks bad.
Is this page the same as the existing waterborne primer page?
No. The waterborne primer page is the broader stage page. This new page is narrower and is specifically for waterborne primers on plastic substrates before topcoat.
Need a faster shortlist for waterborne plastic primers?
Si votre projet est bloqué entre surface entry, compatibility-first crater cleanupet water-based microbubble control, define the real first-screen job before requesting samples. That usually shows much faster whether 3071, 3467, or DF-D9904BR deserves the first round.