快速回答： 买家正在 metal packaging inks usually get a cleaner first shortlist when they separate three different additive jobs instead of asking one product to solve every print problem at once. CHLUMIWE® 2100 should move first when the main issue is substrate-contact wetting, spread, or cleaner laydown on a less absorbent metal-packaging print surface. CHLUMIAG® 3501 deserves earlier review when the buyer needs a broader 不粘, print-side handling， 或者 overprint-varnish compatibility route. CHLUMIAF® 3062 belongs earlier when the system already looks directionally right but foam, entrained air, or circulation-side instability keeps undermining production or print quality.
That is the commercially useful split. This page is not another general printing-ink overview. It is a narrower CHLUMICRYL® application page for buyers who already know the project is a metal-packaging ink job and need a faster first screen.
Why metal packaging inks deserve their own additive page
龙昌已经有了上线页面 flexographic ink additives, gravure ink additives, screen ink additives, offset ink additives， 和 waterborne overprint varnish additives. Those pages solve process-specific or varnish-specific buyer questions.
A metal-packaging ink project creates a different one: is the first additive decision mainly about getting the ink to wet and spread on the packaging surface, about improving post-print anti-sticking and downstream varnish compatibility, or about suppressing foam and trapped air during manufacture and use? That is a distinct application question because buyers in printed metal packaging often care about non-absorbent surface contact, cleaner print-face handling, and whether later finishing or stacking steps still stay practical.
The broader industry framing here is conservative. External printing-additive references commonly separate wetting behavior, surface-control or abrasion-related handling, and efficient defoaming as different additive jobs in inks and overprint systems. The product-specific facts below still stay tied to current Longchang-supported product pages.
目前公司支持的事实已经表明了这一点。
- CHLUMIWE® 2100 is supported by Longchang for 印刷油墨, 叠印清漆， 和 喷墨墨水, with recommended dosage at 0.1% 至 1.0%, addition during grinding, stirring， 或者 after production, optional solvent pre-dilution, and applicability across 紫外线, 溶剂， 和 水基系统.
- CHLUMIAG® 3501 is supported by Longchang as a 多组分改性聚硅氧烷 that can be added at any stage and used across 紫外线, 溶剂， 和 水基系统. The current company-supported page directly lists 印刷油墨, 喷墨墨水, 叠印清漆, 脱模涂层， 和 anti-sticking-agent use.
- CHLUMIAF® 3062 is the defoamer-first route. Longchang supports it for 印刷油墨 推荐剂量为 0.1% 至 0.5% of total formulation, broad 紫外线, 溶剂， 和 水性 applicability, and the practical watchpoint that if solvent dilution is used, stability and defoaming performance should be tested first.
That is enough product-level separation to build a real shortlist for metal-packaging inks without inventing unsupported print claims.
快速对比表：哪条路线应该优先显示？
| Buyer priority in metal packaging inks | 最佳首选路线 | 为什么它应该排在第一位 | 主要观察点 |
|---|---|---|---|
| Poor substrate contact, weak spread, or a drawdown that still looks like a wetting-first problem on metal-packaging print surfaces | CHLUMIWE® 2100 | Longchang directly lists printing inks and overprint varnishes on the product page and supports broad system fit with flexible addition timing | Keep the screening job focused on wetting and spread instead of expecting one additive to solve every post-print handling issue |
| Broader anti-sticking, release-oriented handling, or overprint-varnish compatibility pressure after printing | CHLUMIAG® 3501 | The product page directly combines printing-ink use with overprint varnishes, release coatings, and anti-sticking-agent positioning | Because it is a broader compatibility route, define the real KPI before screening so the result stays interpretable |
| Persistent foam, entrained air, or circulation-side instability during ink manufacture, letdown, or printing | CHLUMIAF® 3062 | Longchang directly supports it as a printing-ink defoamer with a dedicated dosage window and broad system applicability | If solvent dilution is used, stability and defoaming performance should be checked before scale-up |
When CHLUMIWE® 2100 is the better first move
2100 should move to the front when the metal-packaging ink project still looks like a wetting and spread problem. This is often the cleaner first route when the printed surface is not accepting the ink the way the team expects, the drawdown still shows weak first contact, or the lab needs a simpler benchmark before moving into broader post-print surface tradeoffs.
The current Longchang page gives 2100 a useful operating window for that job. It supports 0.1% 至 1.0% dosage, can be added during grinding, stirring, or after production, and can be diluted with water, alcohols, alkanes, and aromatics. The same page directly lists 印刷油墨 和 叠印清漆 among its application scenarios.
- Best first-screen use: substrate-contact wetting, spread, and initial laydown screening
- Dosage guidance: 总配方量为 0.1% 至 1.0%
- System fit: 紫外、溶剂和水基体系
- Commercial reason to shortlist it: it gives a cleaner first answer when the buyer still needs basic surface contact to improve before testing broader anti-sticking or foam-control routes
In short, 2100 is the better first move when the real question is still how the ink meets the metal-packaging surface.
When CHLUMIAG® 3501 is the better first move
3501 deserves earlier review when the project is no longer only about first contact. It is the stronger route when the buyer needs a broader 不粘, release-oriented， 或者 print-side compatibility path that can still sit naturally inside a metal-packaging ink branch.
The current Longchang page is clear here. 3501 is not only listed for 印刷油墨; it is also publicly positioned for 喷墨墨水, 叠印清漆, 脱模涂层， 和 anti-sticking-agent use. It can be added at any stage and used across 紫外线, 溶剂， 和 水基系统.
- Best first-screen use: broader anti-sticking and post-print handling questions, including OPV or release-sensitive workflows
- Addition logic: can be added at any stage or later
- System fit: 紫外、溶剂和水基体系
- Commercial reason to shortlist it: it is the cleaner route when the buyer needs a wider print-converting compatibility path instead of only a wetting correction
That makes 3501 the better first move when the problem sits more in handling, downstream compatibility, or print-face release behavior than in basic spread.
When CHLUMIAF® 3062 is the better first move
3062 should move first when the metal-packaging ink project already has a plausible wetting route but the system keeps failing because of foam, entrained air， 或者 poor process stability. That is a different job from improving first contact or tuning print-side anti-sticking behavior. It is also one that can waste a lot of development time if the team keeps screening more surface additives before solving the foam problem.
Longchang supports 3062 as a polyether-modified polysiloxane defoamer for 印刷油墨, with a recommended dosage at 0.1% 至 0.5% of total formulation and applicability across 紫外线, 溶剂， 和 水基系统. The product page also adds a useful practical note: if solvent dilution is used, the team should first verify stability and defoaming performance.
- Best first-screen use: foam control, air-release management, and process-side stability in printing-ink workflows
- Dosage guidance: 0.1% to 0.5% of total formulation
- System fit: 紫外、溶剂和水基体系
- Main caution: test solvent-dilution stability before scale-up if dilution is part of the process plan
So 3062 is the better first move when the project is being limited by gas management, not by missing wetting or print-face compatibility.
买家在索取样品前应该如何选择
1. Start with the first visible bottleneck
If the metal-packaging surface still is not accepting the ink cleanly, start with 2100. If the real issue is broader anti-sticking, release-oriented handling, or OPV compatibility, move 3501 earlier. If the project is already being damaged by foam or trapped air, move 3062 up.
2. Keep the print stage visible
2100 is the cleaner first route when the issue starts at surface contact. 3501 belongs later when the problem sits more in post-print handling or finishing compatibility. 3062 belongs earlier when the system is unstable because of foam. Those stages should not be mixed together.
3. Do not force a defoamer into a wetting job
If the buyer has not yet solved basic substrate contact, a wetting-first route usually teaches more than jumping straight to a defoamer. The opposite is also true: once the real problem is foam and air release, a new wetting additive may only add noise to the first screen.
4. Use the watchpoint, not only the headline benefit
2100 is broad, but that does not mean it is the best first route for every post-print problem. 3501 offers a wider anti-sticking and compatibility route, but the KPI still needs to stay clear. 3062 can be diluted, but the team should verify stability and defoaming first. Those practical notes often decide the better first sample more than the product family name.
5. Keep the first round tight
For many buyers, one wetting route， 一 broader print-side compatibility route，以及一个 defoamer-first route teach more than screening too many nearby additives at once.
本页推荐的龙昌路线
- 集群概览： CHLUMICRYL® 涂层和油墨添加剂
- Related substrate/process page: How to Choose Additives for Offset Inks
- Related packaging-varnish page: How to Choose Additives for Waterborne Overprint Varnishes
- Related release page: 如何选择适用于UV油墨和罩光油的脱模涂层助剂
- Related metal-packaging coating page: How to Choose Surface Additives for Can Coatings
- 2100 product page: CHLUMIWE® 2100
- 3501 product page: CHLUMIAG® 3501
- 3062 product page: CHLUMIAF® 3062
常见问题
Which additive should I screen first if a metal-packaging ink is not spreading cleanly?
Usually CHLUMIWE® 2100, because it is the cleaner wetting-first benchmark when the real problem is substrate contact and spread.
When should 3501 move ahead of 2100?
3501 should move ahead when the ink already wets reasonably well but the project still needs a broader anti-sticking, release-oriented, or OPV-compatibility route.
When should 3062 move ahead of the other two?
3062 should move ahead when persistent foam, entrained air, or process-side instability is the main barrier to acceptable print quality or manufacturing stability.
Can one of these additives solve every metal-packaging ink issue?
No. Their supported first-screen logic is different enough that buyers should not treat them as interchangeable. The faster route is to identify whether the problem starts at wetting, post-print handling, or foam control.
Need a faster shortlist for metal packaging inks?
If your team is stuck between 基材润湿, print-side anti-sticking and finishing compatibility， 和 foam control, define the real first-screen job before requesting samples. That usually shows much faster whether CHLUMIWE® 2100, CHLUMIAG® 3501, or CHLUMIAF® 3062 deserves the first round.