AgeSin® DF-D982V / Defoamer
|Polysiloxane compounds with hydrophobic particles
|Translucent milky white viscous liquid
|0.96-1.00 g/ml (25±1)℃
|200-2500 mPa-s (bubble viscometer method)(25±0.2)℃
|≥95% (140℃ 2h)
Note: This performance represents typical results only and is not considered a specification, based on the specific COA.
Solvent-based, UV-curable systems
1、It has very good ability to inhibit foam and eliminate microfoam.
2、Since it contains hydrophobic particles, there may be precipitation during storage, which does not affect product quality as long as it is stirred well before use.
3、If used after dilution with solvent, note that the storage period of the diluted solution is limited to 1-2 days.
4、Not applicable to varnish.
5、Can meet the requirements of VOC standard for cigarette packet ink.
6、Reduce the floating surface phenomenon of fumed silica.
In order to improve the foam inhibition, defoaming and defoaming speed of the system, it should be added to the grinding material.
Addition amount (total formula) 0.2-1.0%
Keep in unopened original package for 24 months. Stratification and turbidity may occur at temperatures below 5°C. Heating and thorough mixing before use will not affect product quality. Product beyond the storage period can continue to be used after passing inspection. Before the container is completely empty, it must be tightly closed immediately after use.
25KG / 180KG.