빠른 답변: 구매자 비교 CHLUMILE® 3032, 클루마일® 3432, 그리고 클루미아그® 3501 should not treat them as three versions of the same silicone additive. 3032 should move first when the real job is reactive oil-based leveling ~와 함께 안티블로킹 및 풀어 주다 support. 3432 deserves earlier review when the coating or ink already reaches the substrate but still needs better print-face smoothness, 젖음, 또는 반분화구. 3501 becomes the cleaner first route when the buyer needs broader 달라붙지 않음, release-oriented handling, 또는 downstream compatibility instead of a narrower leveling correction.
That is the useful shortlist split. This page is not another broad additive overview. It is a tighter 비교 페이지 for buyers already inside the CHLUMICRYL® coating-and-ink-additives branch and trying to decide which route deserves the first lab round.
이 비교를 위한 별도의 페이지가 필요한 이유
Longchang already has live CHLUMICRYL® pages for 도료 및 잉크용 평탄화 첨가제, UV 코팅의 흐름 및 평활도, offset ink additives, screen ink additives, and the already-live shortlist 3032 vs 3233 vs 3432. Those pages answer different buyer questions first.
This page answers a cleaner next question: what if the shortlist is no longer about reactive leveling versus hydrocarbon compatibility, but about reactive leveling versus print-face smoothness versus broader anti-sticking and handling behavior? That is a distinct selection problem, and it creates a more useful bridge between the leveling lane and the broader print-side compatibility lane.
What the current company-supported facts actually separate
- CHLUMILE® 3032 롱창은 이 제품을 다음과 같이 포지셔닝하고 있습니다. reactive silicone leveling agent ~을 위한 pigments and inks 및 oil-based coatings. The current product page says it can improve 표면 평활도, 긁힘 방지, 안티블로킹, 그리고 release properties, and that its hydroxyl functional groups can crosslink to the surface to achieve more durable properties. Longchang recommends 0.01% to 1% dosage, allows addition at any stage, and says it can be diluted with alkanes and aromatics.
- 클루마일® 3432 다음과 같은 위치에 있습니다. high-efficiency leveling route ~와 함께 excellent smoothness, low foaming stability, abrasion and scratch resistance, increased substrate wetting, 그리고 반분화구. The current public page directly supports use in 인쇄 잉크, 오버프린트 바니시, wood coatings, 그리고 UV coatings, 와 함께 0.05% ~ 1% dosage and broad dilution flexibility.
- 클루미아그® 3501 is the broader anti-sticking and handling route. Longchang supports it across 인쇄 잉크, 잉크젯 잉크, 스크린 인쇄 잉크, 오버프린트 바니시, 이형 코팅, 그리고 anti-sticking-agent use. The current page also says it can be added at any stage or later and used in UV, 용제, 그리고 수계 시스템.
That is enough company-supported separation to build a real buyer page without inventing unsupported product facts. External industry framing is used only conservatively around the common formulation split between leveling durability, surface appearance and anti-cratering, 그리고 downstream handling compatibility.
간략 비교표: 어떤 경로가 먼저 화면에 나와야 할까요?
| 구매자 우선권 | 3032 | 3432 | 3501 |
|---|---|---|---|
| 메인 첫 화면 작업 | Reactive oil-based leveling with anti-blocking and release support | Print-face smoothness, wetting, and anti-cratering | Broader anti-sticking, release-oriented handling, and downstream compatibility |
| 권장 복용량 | 0.01% to 1% | 0.05% ~ 1% | Current public page emphasizes stage flexibility more clearly than a visible dosage band in the summary used here |
| 시스템 창 | Oil-based pigment and ink routes, with alkane and aromatic dilution support | UV, 용매 및 수성 시스템 | UV, 용매 및 수성 시스템 |
| 덧셈 논리 | Any stage, with avoid-mixing caution from the current page | Any stage, with broad dilution flexibility | Any stage or later addition |
| 최적의 사용 시기 | The formulation still needs durable reactive leveling and anti-blocking logic | The substrate already wets directionally but the visible surface still needs smoother laydown or anti-cratering correction | The coating or ink already behaves directionally well enough on surface appearance, but downstream anti-sticking or handling behavior is still weak |
| 주요 감시 지점 | Do not mix it casually into a crowded additive package when the product page itself says to avoid mixing with other additives | Do not force it into a defoamer-first or anti-sticking-only job when the real role is smoother print-face control | Do not use it as a substitute for a true leveling-first decision when the visible failure is still surface smoothness or crater control |
When CHLUMILE® 3032 is the better first move
3032 should move first when the buyer is solving an oil-based pigment, ink, or coating leveling problem and wants a route that is more than cosmetic slip. The current Longchang page gives 3032 a useful distinction because it ties the product to reactive durable surface control through its hydroxyl functional groups, while also supporting 안티블로킹 및 풀어 주다.
3032 is usually the better first route when:
- the formulation is already clearly 석유 기반 or solvent-side rather than a broad all-system screen,
- the buyer needs a route that supports surface smoothness plus durability,
- anti-blocking and release behavior matter alongside leveling, or
- 프로젝트는 다음 위치에 있습니다. pigments, 잉크, or neighboring oil-based finishing work where a reactive route is commercially useful.
In short, 3032 belongs first when the job is still a reactive leveling decision, not just a general print-surface correction.
When CHLUMILE® 3432 is the better first move
3432 deserves earlier review when the project no longer looks like a reactive durability problem and instead looks like a surface-appearance problem. This is the cleaner route when the coating or ink already reaches the substrate but the visible layer still needs better 매끄러움, 젖음, 그리고 반분화구 support.
The current Longchang page is explicit here. 3432 is positioned around excellent smoothness, increased substrate wetting, 반분화구, 그리고 low foaming stability, with direct application fit in 인쇄 잉크, 오버프린트 바니시, 그리고 UV coatings.
3432 is usually the better first route when:
- the substrate already wets reasonably well, but the printed or coated face still lays down roughly,
- the team wants a route that balances 매끄러움, 젖음, 그리고 반분화구 instead of only anti-blocking,
- the first-screen decision needs to stay aligned with 인쇄 잉크, OPV, 또는 UV-curable surface appearance, 또는
- the buyer wants a cleaner mid-path between reactive leveling and broader handling compatibility.
That makes 3432 the better first move when the real question is how well the visible surface lays down, not how strongly the additive builds a reactive durable surface film or how broadly it helps downstream handling.
When CHLUMIAG® 3501 is the better first move
3501 should move earlier when the system has already passed the narrower leveling question and the buyer now needs a broader 달라붙지 않음, release-oriented, 또는 handling-compatibility route. This is often the more commercially useful first screen when the printed or coated layer already looks directionally acceptable, but downstream contact behavior is still holding the project back.
The current Longchang page gives 3501 unusually clear scope here. It is directly listed for 인쇄 잉크, 잉크젯 잉크, 스크린 인쇄 잉크, 오버프린트 바니시, 이형 코팅, 그리고 anti-sticking-agent use, while also allowing addition at any stage or later.
3501 is usually the better first route when:
- the buyer needs a route that is broader than a pure leveling additive,
- the first concern is 풀어 주다, 달라붙지 않음, 또는 downstream handling compatibility,
- the project may need one route that spans inks, OPV, release-coating, and handling-related work, or
- the visible film already looks directionally acceptable but still behaves poorly afterward.
So 3501 belongs first when the project is really about post-laydown behavior, not just print-face smoothness or reactive leveling durability.
Why 3233 and 3062 are not on this page
Two nearby candidates were realistic for this run, but less clean. 3233 already has a live direct comparison partner set in 3032 vs 3233 vs 3432, where the real split is reactive leveling versus hydrocarbon compatibility versus print-face smoothness. Repeating 3233 here would have pulled this page back into that already-covered compatibility lane.
3062 is also a strong product, but it is a defoamer-first route. Pulling it into this page would have changed the buyer question from a surface-control and handling shortlist into a foam-control shortlist, which Longchang already covers better through defoamer selection and the live 3062 comparison pages.
구매자는 첫 번째 샘플 검토 전에 어떻게 선택해야 할까요?
1. Start with the actual first failure
If the project still needs reactive oil-based leveling and anti-blocking logic, start with 3032. If the substrate already wets but the visible surface still needs smoother laydown or crater cleanup, move 3432 earlier. If the visible layer already looks directionally right but handling or anti-sticking is still weak, move 3501 up.
2. Keep leveling, surface appearance, and handling compatibility separate
One of the easiest formulation mistakes is to keep pushing broader anti-sticking additives when the real issue is still leveling, or to keep testing more leveling routes after the visible surface already looks acceptable and the real failure has shifted into downstream handling.
3. Use the supported operating notes, not only the headline role
3032 carries a real avoid-mixing caution on the current page. 3432 is framed around smoothness, wetting, and anti-cratering. 3501 carries the broadest stage-flexibility and anti-sticking scope. Those details are part of the selection logic, not minor footnotes.
4. Keep the page type honest
This is not a catch-all “best additive for all coatings and inks” page. It is a product-comparison page for buyers already comparing three specific CHLUMICRYL® routes. That narrower comparison intent is exactly why it can sit cleanly beside the broader function pages.
이 비교를 통해 추천하는 롱창 여행 경로
- Reactive leveling route: CHLUMILE® 3032
- Print-face smoothness route: 클루마일® 3432
- Broader anti-sticking route: 클루미아그® 3501
- 클러스터 개요: 클로미크릴® 코팅 및 잉크 첨가제
- Function page: 코팅 및 잉크용 평활 첨가제 선택 방법
- Related comparison: 3032 vs 3233 vs 3432
- Related process page: UV 코팅의 유동성 및 평활성을 개선하는 방법
- Related process page: How to Choose Additives for UV Release Coatings
- Related process page: How to Choose Additives for Offset Inks
자주 묻는 질문
Which additive should I screen first for reactive oil-based leveling?
Usually CHLUMILE® 3032, because Longchang directly positions it as a reactive silicone leveling agent for pigments, inks, and oil-based coatings with anti-blocking and release support.
When should 3432 move ahead of 3032?
3432 should move ahead when the visible problem is smoother laydown, wetting, and anti-cratering on the printed or coated face rather than reactive durability and anti-blocking.
When should 3501 move ahead of the other two?
3501 should move ahead when the visible film already behaves directionally well enough but the project still needs broader anti-sticking, release-oriented handling, or downstream compatibility support.
Can 3501 replace a true leveling route?
Not as a default. It is broader and more handling-oriented. If the real issue is still leveling or crater cleanup, the more useful first screen is usually 3032 or 3432 depending on the job.
보다 엄선된 1차 후보 명단이 필요하신가요?
If your coating or ink project is stuck between reactive leveling durability, print-face smoothness, 그리고 broader anti-sticking compatibility, separate the actual first bottleneck before requesting samples. That usually makes the next CHLUMICRYL® sample decision much faster.