Risposta rapida: se il progetto è chiaramente UV or solvent-based and the buyer wants a reactive easy-clean route, CHLUMIAG® 3000 is usually the cleaner first benchmark. If the team needs a similar anti-graffiti logic but may also need to reach an aqueous system after hydrophilic-solvent pre-dilution, CHLUMIAG® 3170 deserves earlier review. If the formulation is firmly solo a base d'acqua, CHLUMIAG® 5000 is the more direct route because Longchang positions it as a water-based-only anti-graffiti and easy-clean emulsion.
This page is a buyer-decision comparison, not another broad anti-graffiti overview. It sits beside the already-live additivi antigraffiti per rivestimenti guide and helps buyers separate three closely related CHLUMIAG® routes without forcing overlap with that broader function page.
Why this comparison matters
In anti-graffiti and easy-clean coatings, buyers often start with the wrong question. They compare products only by anti-graffiti language, even though the first real commercial split is usually coating-system fit. A route that works well in UV or solvent systems is not automatically the right answer for a water-based line, and a water-based emulsion route is not automatically the best benchmark when the project still lives in solvent or UV chemistry.
That is why this page focuses first on the practical split between:
- 3000: reactive easy-clean route for UV and solvent systems
- 3170: similar route with broader flexibility because it can also enter aqueous systems after hydrophilic-solvent pre-dilution
- 5000: water-based-only emulsion route for buyers who want to stay fully inside an aqueous system window
Quick comparison table
| Prodotto | Miglior primo adattamento | Finestra di sistema supportata | Punto di osservazione principale |
|---|---|---|---|
| CHLUMIAG® 3000 | UV or solvent-based easy-clean and anti-graffiti coatings | UV √, solvente √, a base d'acqua × | Non adatto a sistemi a base d'acqua |
| CHLUMIAG® 3170 | Buyers who want UV/solvent fit but may also need an aqueous route | UV √, solvente √, acquoso con prediluizione del solvente idrofilo | L'utilizzo in ambiente acquoso richiede la prediluizione con solvente idrofilo. |
| CHLUMIAG® 5000 | Water-based-only anti-graffiti and easy-clean coatings | Water-based √, solvent ×, oil-based × | Only for water-based systems and active ingredient is 50% |
Quando CHLUMIAG® 3000 è la scelta migliore
Longchang positions CHLUMIAG® 3000 as a polisilossano modificato multicomponente route for easy-to-clean coatings with a recommended dosage of Da 0,5% a 5%La pagina del prodotto lo supporta per sistemi UV e sistemi di solventi, pur contrassegnandolo esplicitamente come non adatto a sistemi a base d'acqua. Longchang also places it in general industrial, protective, and furniture-coating application scenarios.
From the company-supported anti-graffiti branch already used on the site, 3000 is positioned around a reactive easy-clean route that supports durable hydrophobic and oleophobic surface behavior, reduced dust adhesion, improved washability, and anti-sticking alongside anti-graffiti direction.
3000 usually belongs first when:
- the line is already committed to UV cure or solvent-based chemistry,
- the buyer wants an easy-clean or anti-graffiti route without forcing water-based compatibility into the first sample round,
- the project sits closer to industrial, protective, or furniture coatingse
- the team wants a direct benchmark before considering broader aqueous flexibility.
Quando CHLUMIAG® 3170 è la scelta migliore
CHLUMIAG® 3170 is also supported by Longchang as a polisilossano modificato multicomponente, but the page gives it a more flexible system window. Longchang supports it for sistemi UV e sistemi di solventie dice anche che può essere utilizzato in sistemi acquosi dopo prediluizione con un solvente idrofilo. The recommended dosage is Da 0,05% a 1%, which is notably lower than the broader 3000 and 5000 range.
Longchang also places 3170 into protective, general industrial, leather, and architectural-coating scenarios. In the already-live anti-graffiti branch, it is positioned as a parallel reactive easy-clean route that still reaches aqueous systems when handled correctly.
3170 deserves earlier review when:
- the buyer still wants a UV or solvent capable anti-graffiti route,
- the formulation team may also need to test into an aqueous system,
- lower starting dosage flexibility matters, or
- the project needs one comparison point that can bridge more than one system family.
The key watchpoint is important. 3170 is not a drop-in water-based-only emulsion. Its aqueous route depends on prediluizione del solvente idrofilo, so buyers should not treat it as interchangeable with 5000.
Quando CHLUMIAG® 5000 è la scelta migliore
CHLUMIAG® 5000 is the cleaner first route when the project is already committed to sistemi a base d'acqua. Longchang lo supporta come un emulsione di polisilossano modificato multicomponente con Principio attivo 50% e una dose raccomandata di Da 0,5% a 5%. La pagina del prodotto lo contrassegna esplicitamente per sistemi basati esclusivamente sull'acqua, not oil-based or solvent-based systems.
In the company-supported anti-graffiti branch already published on the site, 5000 is positioned as a water-based anti-graffiti and easy-clean route tied to hydrophobic and oleophobic surface behavior, improved washability, anti-sticking, and anti-graffiti direction.
5000 usually belongs first when:
- the buyer does non want to compromise the water-based system boundary,
- the team wants a route already built as an aqueous emulsion,
- the comparison is for water-based industrial or protective coating work, and
- the buyer wants to avoid the extra handling logic required by 3170 in aqueous use.
How buyers should choose between 3000, 3170, and 5000
1. Start with the system boundary, not the anti-graffiti claim
If the system is definitely water-based, 5000 or 3170 should be reviewed before 3000. If the system is definitely UV or solvent-based, 3000 or 3170 usually deserve the first screen before 5000.
2. Decide whether you need flexibility or a narrower direct fit
3000 is narrower and cleaner for UV or solvent-only logic. 3170 is broader because it can also reach aqueous systems after pre-dilution. 5000 is narrower in the opposite direction because it is built only for water-based systems.
3. Keep dosage and handling differences visible
3170 starts much lower on its recommended range than 3000 or 5000. It also has the clearest handling condition for aqueous use. 5000, meanwhile, is a 50% active emulsion, so buyers should not compare it as if it were the same physical route as 3000.
4. Separate easy-clean maintenance goals from general appearance-only goals
If the real target is marker release, easier cleaning, anti-sticking, and long-term surface maintenance, this CHLUMIAG® branch makes sense. If the real target is only leveling, wetting, or anti-cratering, another additive family may deserve earlier review.
Dove si colloca questa pagina all'interno del gruppo CHLUMICRYL®
- Pagina con le funzioni più ampie: Come scegliere gli additivi antigraffiti per i rivestimenti
- Pagina di panoramica: CHLUMICRYL® Additivi per vernici e inchiostri
- Product category: Anti-Graffiti Additives
- Solvent-side alternative route: AG-D9000
FAQ
Which product is the cleanest first benchmark for solvent-based anti-graffiti coatings?
Usually 3000, because Longchang directly supports it for solvent and UV systems and explicitly excludes water-based use.
When should 3170 move ahead of 3000?
3170 should move ahead when the project may need to cross into an aqueous system, or when the buyer wants one route that can serve UV, solvent, and hydrophilic-solvent-assisted aqueous testing.
Why is 5000 not just the same choice as 3170 for water-based coatings?
Because 5000 is a water-based-only emulsion route, while 3170 reaches aqueous systems only after hydrophilic-solvent pre-dilution. They solve a similar commercial goal, but they do not enter the formulation in the same way.
What if the buyer needs stronger marker-pen wiping resistance in a solvent-based system?
That is where AG-D9000 can become a useful parallel comparison, because Longchang explicitly supports it in solvent-based systems with marker-pen wiping resistance, blocking resistance, and improved cleanability.
Need a tighter anti-graffiti shortlist?
If your coating project is being judged by easy cleaning, marker release, anti-sticking, or long-term surface maintenance, first lock the system boundary. Then compare 3000 for direct UV or solvent work, 3170 for broader flexibility including aqueous entry after pre-dilution, and 5000 for a water-based-only route. That usually gives a cleaner buying decision than comparing all easy-clean additives as if they lived in the same formulation window.