Réponse rapide : if the project is clearly UV-cure or solvent-based and the buyer wants a reactive easy-clean route without forcing water-based compatibility into the first lab round, CHLUMIAG® 3000 is usually the cleaner first benchmark. If the formulation is already committed to a à base d'eau uniquement itinéraire, CHLUMIAG® 5000 is the more direct first screen because Longchang positions it as a émulsion à base d'eau uniquementSi l'acheteur travaille dans un revêtement à base de solvant et se soucie particulièrement de marker-pen wiping resistance, blocking resistance, varnish compatibility, or low-temperature-bake anti-graffiti logic, AG-D9000 mérite un examen plus rapide.
This page is intentionally different from the already-live additifs anti-graffiti pour revêtements overview, the newer 3000 contre 3170 contre 5000 comparison, and the newer 3170 vs 5000 vs AG-D9000 comparison. Those pages answer broader system-boundary or aqueous-entry questions. This page answers a narrower buyer decision: when should the team choose a direct UV or solvent reactive benchmark, a water-based-only emulsion route, or a more process-specific solvent-side marker-wipe route?
Pourquoi cette comparaison mérite sa propre page
Easy-clean and anti-graffiti buyers often already know they need better cleanability, stain release, marker removal, anti-sticking, or lower maintenance burden. The next commercial question is usually not whether anti-graffiti matters at all. It is whether the first sample should follow:
- a direct UV or solvent reactive route that can build durable easy-clean performance into the cured film,
- a water-based-only emulsion route that stays fully inside an aqueous system boundary, or
- a solvent-side process route that is more explicit about marker wiping, blocking resistance, and low-temperature-bake conditions.
That split is commercially useful because coating buyers usually lose time when they compare all easy-clean additives as if they were interchangeable silicone tools. They are not. The formulation window, addition style, and process watchpoints are different enough to justify a dedicated comparison page.
Quick comparison table: CHLUMIAG® 3000 vs 5000 vs AG-D9000
| Facteur d'achat | CHLUMIAG® 3000 | CHLUMIAG® 5000 | AG-D9000 |
|---|---|---|---|
| Fenêtre système principale prise en charge | UV √, solvent √, water-based × | À base d'eau uniquement | A base de solvant |
| Qu'est-ce qui la fait avancer en premier ? | Reactive easy-clean route for UV or solvent systems without forcing aqueous compatibility | Cleaner water-based-only emulsion route | Programmes d'effacement de marqueurs, de résistance au blocage et d'anti-graffiti à base de solvants |
| Dosage recommandé | 0,5% à 5% | 0,5% à 5% | 0,5% à 3% |
| Note importante concernant le traitement | Can be added at any stage and can be diluted with suitable solvent first | Émulsion active 50%, exclusivement destinée aux systèmes à base d'eau | Diluer à une concentration de 10% à 20% avec du xylène avant l'ajout. |
| Point de surveillance important | Not suitable for water-based systems | Ne convient pas aux systèmes à base d'huile ou de solvants | Check varnish compatibility, and low-temperature-bake route needs resin and bake discipline |
When CHLUMIAG® 3000 is the better fit
CHLUMIAG® 3000 should move to the front when the buyer wants a direct easy-clean benchmark for UV or solvent systemsLongchang le soutient en tant que polysiloxane modifié multicomposant avec une dose recommandée de 0,5% à 5%La page produit le prend en charge pour systèmes UV et systèmes de solvants, while explicitly marking it as not suitable for water-based systems. Longchang also places it in general industrial coatings, protective coatings, and furniture coatings.
That matters because some buyers do not want a bridge product or an emulsion route in the first round. They want a direct screen for a UV or solvent coating where the maintenance target is durable easy cleaning rather than only short-term surface feel. Longchang’s already-live anti-graffiti branch on the site also positions 3000 around reactive OH-group surface modification, with durable hydrophobicity, oleophobicity, reduced dust adhesion, improved washability, anti-sticking, and anti-graffiti direction.
- Meilleure adéquation : buyers who want a direct UV or solvent reactive benchmark without forcing water-based compatibility into the selection logic
- Principal atout : a clean system fit for UV and solvent routes with broad industrial and furniture-coating relevance
- Point de surveillance principal : it should not be treated as an aqueous-entry or water-based option
Quand CHLUMIAG® 5000 est le meilleur choix
CHLUMIAG® 5000 La première option, plus propre, consiste à nettoyer le terrain lorsque l'acheteur sait déjà que le projet doit rester en place. à base d'eauLongchang le soutient en tant que émulsion de polysiloxane modifiée multicomposante avec ingrédient actif 50% et une dose recommandée de 0,5% à 5%La page produit l'indique explicitement pour systèmes à base d'eau uniquement, while excluding oil-based et solvent-based utiliser.
That is the commercial value. 5000 is not a compromise route between solvent and aqueous chemistry. It is the more direct water-based path when the buyer wants an easy-clean or anti-graffiti screen that starts inside an emulsion logic. Longchang’s already-published anti-graffiti branch on the site also positions 5000 around reactive OH-group bonding with resin, supporting hydrophobicity, oleophobicity, reduced dust adhesion, improved washability, anti-sticking, and anti-graffiti behavior in water-based coating logic.
- Meilleure adéquation : travaux de revêtement industriel, protecteur ou apparenté à base d'eau qui souhaitent rester entièrement dans la fenêtre du système aqueux
- Principal atout : clear water-based-only fit instead of a cross-system compromise
- Point de surveillance principal : because it is a 50% active emulsion, buyers should not compare it as if it were the same physical route as 3000 or AG-D9000
Quand l'AG-D9000 est le meilleur choix
AG-D9000 deserves earlier review when the project is not a water-based discussion at all and the buyer is being judged more explicitly by marker-pen wiping resistance, blocking resistance, and process realism. Longchang describes it as polydiméthylsiloxane avec groupe hydroxy pour solvent-based systems. The company-supported page also directly supports improved surface anti-graffiti et nettoyabilité, amélioré angle de contact de l'eau, hydrophobie, oléophobie, excellent blocking resistanceet wiping resistance from marker pen.
This makes AG-D9000 commercially different from the more general CHLUMIAG® branch. The same product page gives process details that matter in real selection work:
- Longchang suggère le diluer à 10% à 20% avec du xylène avant l'ajout.
- Pour systèmes de cuisson basse température à deux compartimentsLongchang suggère d'utiliser Résine acrylique à indice d'hydroxyle élevé et prolonger le temps de cuisson pour améliorer la protection anti-graffiti.
- Longchang also says compatibility should be evaluated first before use in vernis.
Those notes make AG-D9000 more than a generic easy-clean additive. It is a stronger shortlist item when the buyer needs a solvent-side route with more explicit marker-wipe and bake-process guidance.
- Meilleure adéquation : revêtements à base de solvants où l'effacement des marqueurs, la résistance au blocage et les performances anti-graffiti du processus de cuisson sont importants dès le début
- Principal atout : more explicit solvent-side maintenance and processing guidance
- Point de surveillance principal : resin choice, bake time, xylene pre-dilution, and varnish compatibility deserve real screening discipline
Comment les acheteurs doivent choisir avant de demander des échantillons
1. Commencez par la limite réelle du système
If the project must stay water-based, 5000 usually deserves earlier review. If the line is clearly UV or solvent-based and wants a direct reactive easy-clean route, 3000 is more natural. If the route is already solvent-based and the customer is asking about marker wiping or blocking resistance under real process conditions, AG-D9000 should move up.
2. Separate direct benchmark logic from process-heavy solvent logic
3000 and AG-D9000 can both live in solvent-side conversations, but not for the same reason. 3000 is the cleaner direct benchmark when the team wants a broader reactive easy-clean route. AG-D9000 is the more process-explicit option when marker wiping, varnish compatibility, or low-temperature-bake behavior are central to the buying decision.
3. Keep maintenance KPIs visible
This page is for coatings judged by cleanability, anti-graffiti performance, anti-sticking, marker wiping, or lower maintenance burden after cure. If the target is only appearance, wetting, leveling, or anti-cratering, another additive family may deserve earlier review.
4. Do not hide physical-form differences
5000 is a 50% active water-based emulsion. 3000 and AG-D9000 are not. Buyers should not compare them as if they entered the formulation in the same way or fit the same process boundary.
5. Utilisez un premier tour d'échantillonnage court.
Pour de nombreux acheteurs, obtenir un premier échantillon aussi propre que possible est une solution possible. UV or solvent reactive easy-clean work, une voie pour water-based-only emulsion logicet un itinéraire pour performance d'effacement du marqueur côté solvant. That usually gives faster insight than comparing a larger anti-graffiti list all at once.
Itinéraire recommandé pour Longchang à partir de cette page
- Page de fonctions plus larges : Comment choisir les additifs anti-graffiti pour les revêtements
- Page de comparaison associée : CHLUMIAG® 3000 vs 3170 vs 5000
- Page de comparaison associée : CHLUMIAG® 3170 vs 5000 vs AG-D9000
- Aperçu du cluster : CHLUMICRYL® Additifs pour revêtements et encres
- Direct UV or solvent reactive route: CHLUMIAG® 3000
- Parcours exclusivement aquatique : CHLUMIAG® 5000
- Méthode d'effacement des marqueurs à base de solvant : AG-D9000
FAQ
Which product is the cleanest first benchmark for UV or solvent easy-clean coatings when water-based fit is not needed?
Usually CHLUMIAG® 3000, because Longchang directly supports it for UV and solvent systems and explicitly excludes water-based systems.
When should 5000 move ahead of 3000?
5000 should move ahead when the project is already committed to a water-based-only route and the buyer wants an emulsion path rather than a UV or solvent benchmark.
Why is AG-D9000 not just another version of the CHLUMIAG® branch?
Because Longchang positions AG-D9000 much more explicitly around solvent-based work, marker-pen wiping resistance, blocking resistance, xylene pre-dilution, varnish compatibility, and low-temperature-bake guidance.
À quoi les acheteurs doivent-ils faire attention avant d'utiliser l'AG-D9000 sur du vernis ?
Longchang affirme que la compatibilité doit être évaluée avant toute utilisation dans le vernis ; les acheteurs doivent donc considérer la compatibilité du vernis comme un critère de sélection actif plutôt que de supposer une interchangeabilité directe.
What general maintenance targets make this comparison relevant?
Across the coatings market, easy-clean and anti-graffiti routes are usually screened when the surface must release marker, dirt, oils, or stains more easily and keep lower maintenance burden over time. That general industry framing helps explain why system fit and process conditions matter so much in the first sample round.
Besoin d'une liste restreinte et plus ciblée de produits faciles à nettoyer ?
If your coating project is being judged by easy cleaning, anti-graffiti behavior, marker wiping, or blocking resistance, first decide whether the real job is a direct UV or solvent reactive benchmark, un water-based-only emulsion route, ou un solvent-side process-heavy marker-wipe route. That usually leads to a cleaner Longchang shortlist than treating 3000, 5000, and AG-D9000 as if they served the same formulation path.