{"id":10871,"date":"2026-07-26T00:00:53","date_gmt":"2026-07-26T00:00:53","guid":{"rendered":"https:\/\/longchangchemical.com\/?p=10871"},"modified":"2026-07-26T02:12:14","modified_gmt":"2026-07-26T02:12:14","slug":"coating-pinhole-additive-selection","status":"publish","type":"post","link":"https:\/\/longchangchemical.com\/pt\/coating-pinhole-additive-selection\/","title":{"rendered":"How to Choose Additives for Coating Pinholes"},"content":{"rendered":"<p><strong>Resposta r\u00e1pida:<\/strong> buyers dealing with <strong>coating pinholes<\/strong> usually lose time when they treat every tiny hole in the film as the same additive problem. In Longchang\u2019s current CHLUMICRYL\u00ae branch, <a href=\"https:\/\/longchangchemical.com\/pt\/product\/agesin-wd-d547-wetting-agent\/\">CHLUMICRYL\u00ae WD-D547<\/a> is the cleaner first route when the pinhole complaint still starts with a <strong>broad wetting and surface-tension problem<\/strong>, especially in water-borne work where spread and first-contact coverage still look weak. <a href=\"https:\/\/longchangchemical.com\/pt\/product\/agesin-d982v-defoamer\/\">CHLUMICRYL\u00ae DF-D982V<\/a> deserves the earlier screen when the project sits in a <strong>solvent-based or UV-curable system<\/strong> and the defect behaves more like a <strong>microfoam or trapped-air problem<\/strong>. <a href=\"https:\/\/longchangchemical.com\/pt\/product\/agesin-we-d9904br-defoamer\/\">CHLUMICRYL\u00ae DF-D9904BR<\/a> belongs earlier when the real bottleneck is <strong>water-based microbubbles and pinholes<\/strong> that keep surviving into the dried coating film.<\/p>\n<p>That is the commercially useful split. This page is intentionally narrower than Longchang\u2019s already-live <a href=\"https:\/\/longchangchemical.com\/pt\/coating-defect-additive-selection\/\">coating defect additive selection<\/a> page and its newer <a href=\"https:\/\/longchangchemical.com\/pt\/coating-fisheye-additive-selection\/\">coating fisheye additive selection<\/a> page. Those pages help buyers decide among broader additive families or crater-like defects. This new page answers the tighter B2B question that comes later in troubleshooting: <strong>if the visible complaint is already pinholes, which supported route deserves the first sample round?<\/strong><\/p>\n<h2>Why coating pinholes deserve their own buyer-selection page<\/h2>\n<p>A pinhole complaint sits in a narrower decision window than a broad defect page. In practice, pinholes can be tied to more than one first failure. Sometimes the film is still not wetting and spreading cleanly enough, so small voids are part of a broader surface-entry problem. Sometimes the system is carrying <strong>microfoam<\/strong> or trapped air from grinding, pumping, or application, and the additive decision belongs first to a defoamer. In water-based systems, pinholes often stay attached to <strong>fine microbubbles<\/strong> that survive longer than the team expects.<\/p>\n<p>That is why this page can sit cleanly inside the CHLUMICRYL\u00ae branch without collapsing into the same story as a general wetting page or a broad defoamer page. The buyer is no longer asking, in the abstract, whether they need a wetting additive or a defoamer. The buyer is asking which supported route belongs first when the coating film is already showing <strong>pinhole-type surface failure<\/strong>.<\/p>\n<p>General industry framing also supports this narrower angle. External coating references commonly separate pinholes caused by <strong>poor surface wetting<\/strong> from pinholes caused by <strong>air entrapment, microfoam, or bubble release during drying<\/strong>. That outside framing is used here only conservatively. The product facts below stay tied to Longchang-supported product pages.<\/p>\n<h2>What the current company-supported evidence already separates<\/h2>\n<ul>\n<li><strong>CHLUMICRYL\u00ae WD-D547<\/strong> is supported by Longchang as a <strong>polyether modified polydimethyl siloxane<\/strong> para <strong>water-borne paint, solvent and solvent-free paint, and UV cure paint<\/strong>. Longchang states that it can <strong>most effectively reduce surface tension in water systems<\/strong>, offers <strong>wetting and spreading<\/strong>, and also supports <strong>anti-cratering, re-coating, defoaming, and leveling<\/strong>A dosagem sugerida \u00e9 <strong>0,1% a 0,5%<\/strong>.<\/li>\n<li><strong>CHLUMICRYL\u00ae DF-D982V<\/strong> is supported by Longchang as a <strong>polysiloxane compound with hydrophobic particles<\/strong> para <strong>sistemas \u00e0 base de solventes e cur\u00e1veis por UV<\/strong>. Longchang states that it has <strong>very good ability to inhibit foam and eliminate microfoam<\/strong>, recommends adding it <strong>to the grinding material<\/strong> to improve foam inhibition and defoaming speed, and supports a dosage of <strong>0.2% to 1.0%<\/strong>. The page also says it is <strong>not applicable to varnish<\/strong>.<\/li>\n<li><strong>CHLUMICRYL\u00ae DF-D9904BR<\/strong> is supported by Longchang as a <strong>polyether modified polysiloxane compound<\/strong>, <strong>silica-free<\/strong>, for <strong>sistemas \u00e0 base de \u00e1gua<\/strong>. Longchang directly states that it has good defoaming property to <strong>prevent microbubbles and pinholes<\/strong> in the coating film of <strong>water-based coatings and inks<\/strong>. The page also says it should be added <strong>under high shear<\/strong>, recommends entering through the <strong>primeiro co-solvente<\/strong>, and gives a dosage range of <strong>0,1% a 1,0%<\/strong>.<\/li>\n<\/ul>\n<p>That is enough company-supported separation to build a real buyer page without inventing unsupported defect chemistry or cure-mechanism claims.<\/p>\n<h2>Tabela de compara\u00e7\u00e3o r\u00e1pida: qual rota merece aparecer em primeiro lugar?<\/h2>\n<table>\n<thead>\n<tr>\n<th>Observed pinhole situation<\/th>\n<th>Melhor primeira rota<\/th>\n<th>Por que ele deve ser o primeiro?<\/th>\n<th>Posto de observa\u00e7\u00e3o principal<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>The film still shows broad spread loss, weak first-contact coverage, or a water-borne surface-entry problem before the team can even judge trapped-air behavior honestly<\/td>\n<td><a href=\"https:\/\/longchangchemical.com\/pt\/product\/agesin-wd-d547-wetting-agent\/\">CHLUMICRYL\u00ae WD-D547<\/a><\/td>\n<td>Longchang supports it directly around lower surface tension in water systems plus wetting, spreading, anti-cratering, and defoaming support<\/td>\n<td>It is the better first move when pinholes still sit inside a broader wetting problem, not when the film already is clearly dominated by persistent microfoam<\/td>\n<\/tr>\n<tr>\n<td>The coating is solvent-based or UV-curable and the defect behaves more like grinding-side foam, trapped air, or microfoam breaking through the film<\/td>\n<td><a href=\"https:\/\/longchangchemical.com\/pt\/product\/agesin-d982v-defoamer\/\">CHLUMICRYL\u00ae DF-D982V<\/a><\/td>\n<td>Longchang positions it for solvent-based and UV-curable systems with very good foam inhibition and microfoam elimination<\/td>\n<td>The product page says it is not applicable to varnish, so do not over-extend it into every clear-finish route<\/td>\n<\/tr>\n<tr>\n<td>The system is water-based and the visible defect pattern still points to fine bubbles or pinholes surviving into the dried coating film<\/td>\n<td><a href=\"https:\/\/longchangchemical.com\/pt\/product\/agesin-we-d9904br-defoamer\/\">CHLUMICRYL\u00ae DF-D9904BR<\/a><\/td>\n<td>Longchang directly supports it to prevent microbubbles and pinholes in the coating film of water-based coatings and inks<\/td>\n<td>It should be added through the recommended high-shear, co-solvent-first route, not treated as a careless late after-add<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>When CHLUMICRYL\u00ae WD-D547 is the better first move<\/h2>\n<p>WD-D547 should move first when the pinhole complaint still begins with a <strong>broader wetting failure<\/strong>. This is the cleaner route when the coating does not spread onto the substrate surface cleanly enough, still shows first-contact retreat, or looks as if the team is trying to judge pinholes before the film has even entered the surface window correctly.<\/p>\n<p>That supported logic is commercially useful because Longchang does not position WD-D547 only as a vague silicone additive. The current product page keeps together <strong>surface-tension reduction<\/strong>, especially in <strong>water systems<\/strong>, mais <strong>wetting, spreading, anti-cratering, re-coating, defoaming, and leveling<\/strong>.<\/p>\n<p>WD-D547 is usually the better first route when:<\/p>\n<ul>\n<li>the coating still beads, retracts, or leaves obvious unsteady spread before a more refined pinhole judgment is even possible,<\/li>\n<li>the project is water-borne and the first visible failure still looks like a <strong>surface-tension and wetting problem<\/strong>,<\/li>\n<li>the buyer wants one first screen that covers <strong>wetting and anti-cratering support<\/strong> together, or<\/li>\n<li>the line still needs a more conventional surface-entry correction before a narrower defoamer route becomes justified.<\/li>\n<\/ul>\n<p>If the panel still is not spreading correctly, jumping immediately to a defoamer can create noise instead of clarity.<\/p>\n<h2>When CHLUMICRYL\u00ae DF-D982V is the better first move<\/h2>\n<p>DF-D982V deserves the earlier screen when the coating pinholes behave more like a <strong>solvent-side or UV-side microfoam problem<\/strong>. This is the better first route when the team already suspects that grinding, mixing, or application is carrying trapped air into the film and the coating system is <strong>solvent-based or UV-curable<\/strong> rather than water-based.<\/p>\n<p>The current Longchang-supported page is direct here. DF-D982V is not positioned as a general surface-control additive. It is positioned around <strong>foam inhibition<\/strong> e <strong>microfoam elimination<\/strong>, with a process recommendation to add it to the <strong>grinding material<\/strong> in order to improve defoaming speed and foam suppression.<\/p>\n<p>DF-D982V is usually the better first route when:<\/p>\n<ul>\n<li>the coating system is solvent-based or UV-curable instead of water-based,<\/li>\n<li>the defect looks tied to <strong>microfoam or trapped air<\/strong> rather than a broad wetting problem,<\/li>\n<li>the lab wants a stronger <strong>grinding-side defoamer benchmark<\/strong> before changing other surface additives, or<\/li>\n<li>the project needs a route that can suppress microfoam early in the process instead of only trying to clean the final film later.<\/li>\n<\/ul>\n<p>The boundary matters here as well. Longchang says this route is <strong>not applicable to varnish<\/strong>, so buyers should keep the first screen inside the supported system window.<\/p>\n<h2>Quando CHLUMICRYL\u00ae DF-D9904BR \u00e9 a melhor primeira op\u00e7\u00e3o<\/h2>\n<p>DF-D9904BR should move first when the pinhole complaint sits clearly inside a <strong>water-based microbubble problem<\/strong>. This is the stronger route when the film still carries fine bubbles through drying and the visible defect pattern looks more like surviving air release than missing substrate wetting alone.<\/p>\n<p>The current Longchang page keeps this commercially clean. DF-D9904BR is supported specifically to <strong>prevent microbubbles and pinholes<\/strong> in the coating film of <strong>water-based coatings and inks<\/strong>, and it comes with a more deliberate process instruction than many buyers expect. The product should be added under <strong>high shear<\/strong> and ideally enter through the <strong>primeiro co-solvente<\/strong>.<\/p>\n<p>DF-D9904BR is usually the better first route when:<\/p>\n<ul>\n<li>the system is clearly <strong>\u00e0 base de \u00e1gua<\/strong>,<\/li>\n<li>persistent fine bubbles are still surviving into the dried coating film,<\/li>\n<li>pinholes are making it hard to judge whether the rest of the formulation is directionally acceptable, or<\/li>\n<li>the process already has a realistic high-shear incorporation step available.<\/li>\n<\/ul>\n<p>This is the better first move when the visible pinhole pattern is being limited by <strong>water-based bubble carry-through<\/strong>, not only by missing wetting or general leveling.<\/p>\n<h2>How buyers should choose before the first sample round<\/h2>\n<h3>1. Decide whether the pinhole starts with wetting or with trapped air<\/h3>\n<p>If the film still cannot spread or enter the substrate cleanly, start with WD-D547. If the system already wets directionally but still traps air, move to the appropriate defoamer route first.<\/p>\n<h3>2. Separate solvent and UV pinholes from water-based pinholes<\/h3>\n<p>DF-D982V and DF-D9904BR do not answer the same first problem. D982V belongs earlier when the project sits in solvent-based or UV-curable work and the issue behaves like microfoam. D9904BR belongs earlier when the project is clearly water-based and fine bubbles are surviving into the film.<\/p>\n<h3>3. Keep process discipline visible<\/h3>\n<p>Some pinhole complaints are as much about where the additive enters the process as which additive gets chosen. D982V is supported around grinding-side addition. D9904BR is supported around co-solvent-first, high-shear incorporation. If the trial plan ignores those process notes, the additive comparison becomes less trustworthy.<\/p>\n<h3>4. Do not force a defoamer when the real problem is still surface entry<\/h3>\n<p>If the coating still is not wetting the substrate correctly, another defoamer trial may not solve the first failure. That is where WD-D547 can be the cleaner first benchmark.<\/p>\n<h3>5. Keep the first trial set small<\/h3>\n<p>For many coating pinhole projects, a practical first plan is one <strong>WD-D547 wetting route<\/strong>, um <strong>DF-D982V solvent and UV microfoam route<\/strong>e um <strong>DF-D9904BR water-based microbubble route<\/strong>. That usually teaches more than screening a crowded set of near-neighbor additives.<\/p>\n<h2>Caminho recomendado para Longchang a partir desta p\u00e1gina<\/h2>\n<ul>\n<li><strong>Broad wetting correction:<\/strong> <a href=\"https:\/\/longchangchemical.com\/pt\/product\/agesin-wd-d547-wetting-agent\/\">CHLUMICRYL\u00ae WD-D547<\/a><\/li>\n<li><strong>Solvent and UV defoaming route:<\/strong> <a href=\"https:\/\/longchangchemical.com\/pt\/product\/agesin-d982v-defoamer\/\">CHLUMICRYL\u00ae DF-D982V<\/a><\/li>\n<li><strong>Water-based microbubble route:<\/strong> <a href=\"https:\/\/longchangchemical.com\/pt\/product\/agesin-we-d9904br-defoamer\/\">CHLUMICRYL\u00ae DF-D9904BR<\/a><\/li>\n<li><strong>Vis\u00e3o geral do cluster:<\/strong> <a href=\"https:\/\/longchangchemical.com\/pt\/chlumicryl-coating-ink-additives\/\">CHLUMICRYL\u00ae Aditivos para tintas e revestimentos<\/a><\/li>\n<li><strong>P\u00e1gina de fun\u00e7\u00f5es relacionadas:<\/strong> <a href=\"https:\/\/longchangchemical.com\/pt\/defoamers-coatings-inks\/\">Como escolher antiespumantes para revestimentos e tintas<\/a><\/li>\n<li><strong>Related defect router:<\/strong> <a href=\"https:\/\/longchangchemical.com\/pt\/coating-defect-additive-selection\/\">Aditivo umectante vs. aditivo nivelador vs. antiespumante vs. surfactante fluorado em revestimentos e tintas<\/a><\/li>\n<li><strong>P\u00e1gina de defeito relacionada:<\/strong> <a href=\"https:\/\/longchangchemical.com\/pt\/coating-fisheye-additive-selection\/\">Coating Fisheye Additive Selection<\/a><\/li>\n<li><strong>P\u00e1gina de aplica\u00e7\u00e3o relacionada:<\/strong> <a href=\"https:\/\/longchangchemical.com\/pt\/waterborne-floor-coating-additives\/\">How to Choose Additives for Waterborne Floor Coatings<\/a><\/li>\n<li><strong>P\u00e1gina de aplica\u00e7\u00e3o relacionada:<\/strong> <a href=\"https:\/\/longchangchemical.com\/pt\/waterborne-plastic-clearcoat-additives\/\">How to Choose Additives for Waterborne Plastic Clearcoats<\/a><\/li>\n<\/ul>\n<h2>PERGUNTAS FREQUENTES<\/h2>\n<h3>What is the best first additive if the pinholes still look like a broad wetting failure?<\/h3>\n<p>Usually WD-D547, especially when the system is water-borne and the film still is not spreading cleanly enough for a more honest trapped-air judgment.<\/p>\n<h3>When should I test DF-D982V before a water-based defoamer?<\/h3>\n<p>Test DF-D982V earlier when the coating system is solvent-based or UV-curable and the defect behaves more like microfoam or trapped air than a water-based fine-bubble problem.<\/p>\n<h3>When does DF-D9904BR deserve the earlier screen?<\/h3>\n<p>It deserves earlier review when the system is clearly water-based and fine bubbles or pinholes are still surviving into the dried film.<\/p>\n<h3>Can one of these additives solve every pinhole problem?<\/h3>\n<p>No. Their supported first-screen logic is different enough that buyers should not treat them as interchangeable. The faster route is to identify whether the pinholes start with broad wetting loss, solvent and UV microfoam, or water-based microbubble carry-through.<\/p>\n<h3>Is every pinhole defect an additive-only problem?<\/h3>\n<p>No. Surface contamination, substrate porosity, process aeration, and drying conditions can still distort the read. This page helps buyers choose the right additive lane after the obvious process-side causes are checked.<\/p>\n<h2>Precisa de uma lista mais curta?<\/h2>\n<p>If your coating panel still shows <strong>pinholes<\/strong>, stop treating that as one generic additive request. First decide whether the defect still starts with <strong>broad wetting loss<\/strong>, um <strong>solvent or UV microfoam route<\/strong>ou um <strong>water-based microbubble problem<\/strong>. That usually makes the next CHLUMICRYL\u00ae sample decision much faster.<\/p>","protected":false},"excerpt":{"rendered":"<p>A practical CHLUMICRYL\u00ae buyer guide for coating pinholes that separates broad wetting correction, solvent and UV microfoam control, and water-based microbubble cleanup before scale-up.<\/p>","protected":false},"author":6,"featured_media":10872,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-10871","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v25.3.1 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Choose Additives for Coating Pinholes | CHLUMICRYL\u00ae Guide<\/title>\n<meta name=\"description\" content=\"Choose CHLUMICRYL\u00ae additives for coating pinholes by separating wetting correction, solvent and UV microfoam control, and water-based microbubble cleanup across WD-D547, DF-D982V, and DF-D9904BR.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/longchangchemical.com\/pt\/coating-pinhole-additive-selection\/\" \/>\n<meta property=\"og:locale\" content=\"pt_BR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Choose Additives for Coating Pinholes | CHLUMICRYL\u00ae Guide\" \/>\n<meta property=\"og:description\" content=\"Choose CHLUMICRYL\u00ae additives for coating pinholes by separating wetting correction, solvent and UV microfoam control, and water-based microbubble cleanup across WD-D547, DF-D982V, and DF-D9904BR.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/longchangchemical.com\/pt\/coating-pinhole-additive-selection\/\" \/>\n<meta property=\"og:site_name\" content=\"Longchang Chemical\" \/>\n<meta property=\"article:published_time\" content=\"2026-07-26T00:00:53+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-26T02:12:14+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/coating-pinhole-additive-selection-hero.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1024\" \/>\n\t<meta property=\"og:image:height\" content=\"576\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"marketing@longchang Group\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/\"},\"author\":{\"name\":\"marketing@longchang Group\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5\"},\"headline\":\"How to Choose Additives for Coating Pinholes\",\"datePublished\":\"2026-07-26T00:00:53+00:00\",\"dateModified\":\"2026-07-26T02:12:14+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/\"},\"wordCount\":1984,\"publisher\":{\"@id\":\"https:\/\/longchangchemical.com\/#organization\"},\"image\":{\"@id\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/coating-pinhole-additive-selection-hero.jpg\",\"articleSection\":[\"Uncategorized\"],\"inLanguage\":\"pt-BR\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/\",\"url\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/\",\"name\":\"How to Choose Additives for Coating Pinholes | CHLUMICRYL\u00ae Guide\",\"isPartOf\":{\"@id\":\"https:\/\/longchangchemical.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/coating-pinhole-additive-selection-hero.jpg\",\"datePublished\":\"2026-07-26T00:00:53+00:00\",\"dateModified\":\"2026-07-26T02:12:14+00:00\",\"description\":\"Choose CHLUMICRYL\u00ae additives for coating pinholes by separating wetting correction, solvent and UV microfoam control, and water-based microbubble cleanup across WD-D547, DF-D982V, and DF-D9904BR.\",\"breadcrumb\":{\"@id\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#breadcrumb\"},\"inLanguage\":\"pt-BR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-BR\",\"@id\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#primaryimage\",\"url\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/coating-pinhole-additive-selection-hero.jpg\",\"contentUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/coating-pinhole-additive-selection-hero.jpg\",\"width\":1024,\"height\":576},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/longchangchemical.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Choose Additives for Coating Pinholes\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/longchangchemical.com\/#website\",\"url\":\"https:\/\/longchangchemical.com\/\",\"name\":\"Longchang Chemical\",\"description\":\"China chemical manufacturer \uff06 supplier\",\"publisher\":{\"@id\":\"https:\/\/longchangchemical.com\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/longchangchemical.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"pt-BR\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/longchangchemical.com\/#organization\",\"name\":\"Longchang Chemical\",\"url\":\"https:\/\/longchangchemical.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-BR\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png\",\"contentUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png\",\"width\":512,\"height\":512,\"caption\":\"Longchang Chemical\"},\"image\":{\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5\",\"name\":\"marketing@longchang Group\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-BR\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g\",\"caption\":\"marketing@longchang Group\"},\"url\":\"https:\/\/longchangchemical.com\/pt\/author\/marketinglongchang-group\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Choose Additives for Coating Pinholes | CHLUMICRYL\u00ae Guide","description":"Choose CHLUMICRYL\u00ae additives for coating pinholes by separating wetting correction, solvent and UV microfoam control, and water-based microbubble cleanup across WD-D547, DF-D982V, and DF-D9904BR.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/longchangchemical.com\/pt\/coating-pinhole-additive-selection\/","og_locale":"pt_BR","og_type":"article","og_title":"How to Choose Additives for Coating Pinholes | CHLUMICRYL\u00ae Guide","og_description":"Choose CHLUMICRYL\u00ae additives for coating pinholes by separating wetting correction, solvent and UV microfoam control, and water-based microbubble cleanup across WD-D547, DF-D982V, and DF-D9904BR.","og_url":"https:\/\/longchangchemical.com\/pt\/coating-pinhole-additive-selection\/","og_site_name":"Longchang Chemical","article_published_time":"2026-07-26T00:00:53+00:00","article_modified_time":"2026-07-26T02:12:14+00:00","og_image":[{"width":1024,"height":576,"url":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/coating-pinhole-additive-selection-hero.jpg","type":"image\/jpeg"}],"author":"marketing@longchang Group","twitter_card":"summary_large_image","schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#article","isPartOf":{"@id":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/"},"author":{"name":"marketing@longchang Group","@id":"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5"},"headline":"How to Choose Additives for Coating Pinholes","datePublished":"2026-07-26T00:00:53+00:00","dateModified":"2026-07-26T02:12:14+00:00","mainEntityOfPage":{"@id":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/"},"wordCount":1984,"publisher":{"@id":"https:\/\/longchangchemical.com\/#organization"},"image":{"@id":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#primaryimage"},"thumbnailUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/coating-pinhole-additive-selection-hero.jpg","articleSection":["Uncategorized"],"inLanguage":"pt-BR"},{"@type":"WebPage","@id":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/","url":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/","name":"How to Choose Additives for Coating Pinholes | CHLUMICRYL\u00ae Guide","isPartOf":{"@id":"https:\/\/longchangchemical.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#primaryimage"},"image":{"@id":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#primaryimage"},"thumbnailUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/coating-pinhole-additive-selection-hero.jpg","datePublished":"2026-07-26T00:00:53+00:00","dateModified":"2026-07-26T02:12:14+00:00","description":"Choose CHLUMICRYL\u00ae additives for coating pinholes by separating wetting correction, solvent and UV microfoam control, and water-based microbubble cleanup across WD-D547, DF-D982V, and DF-D9904BR.","breadcrumb":{"@id":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#breadcrumb"},"inLanguage":"pt-BR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/"]}]},{"@type":"ImageObject","inLanguage":"pt-BR","@id":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#primaryimage","url":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/coating-pinhole-additive-selection-hero.jpg","contentUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/coating-pinhole-additive-selection-hero.jpg","width":1024,"height":576},{"@type":"BreadcrumbList","@id":"https:\/\/longchangchemical.com\/coating-pinhole-additive-selection\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/longchangchemical.com\/"},{"@type":"ListItem","position":2,"name":"How to Choose Additives for Coating Pinholes"}]},{"@type":"WebSite","@id":"https:\/\/longchangchemical.com\/#website","url":"https:\/\/longchangchemical.com\/","name":"Qu\u00edmica Longchang","description":"Fabricante de produtos qu\u00edmicos na China \uff06 fornecedor","publisher":{"@id":"https:\/\/longchangchemical.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/longchangchemical.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"pt-BR"},{"@type":"Organization","@id":"https:\/\/longchangchemical.com\/#organization","name":"Qu\u00edmica Longchang","url":"https:\/\/longchangchemical.com\/","logo":{"@type":"ImageObject","inLanguage":"pt-BR","@id":"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/","url":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png","contentUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png","width":512,"height":512,"caption":"Longchang Chemical"},"image":{"@id":"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5","name":"marketing@longchang Group","image":{"@type":"ImageObject","inLanguage":"pt-BR","@id":"https:\/\/longchangchemical.com\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g","caption":"marketing@longchang Group"},"url":"https:\/\/longchangchemical.com\/pt\/author\/marketinglongchang-group\/"}]}},"_links":{"self":[{"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/posts\/10871","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/comments?post=10871"}],"version-history":[{"count":2,"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/posts\/10871\/revisions"}],"predecessor-version":[{"id":10874,"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/posts\/10871\/revisions\/10874"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/media\/10872"}],"wp:attachment":[{"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/media?parent=10871"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/categories?post=10871"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/longchangchemical.com\/pt\/wp-json\/wp\/v2\/tags?post=10871"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}