{"id":10827,"date":"2026-07-24T00:00:46","date_gmt":"2026-07-24T00:00:46","guid":{"rendered":"https:\/\/longchangchemical.com\/?p=10827"},"modified":"2026-08-08T07:15:05","modified_gmt":"2026-08-08T07:15:05","slug":"waterborne-plastic-coating-additives","status":"publish","type":"post","link":"https:\/\/longchangchemical.com\/nl\/waterborne-plastic-coating-additives\/","title":{"rendered":"Waterborne Plastic Coating Additives: Wetting & Foam"},"content":{"rendered":"

Waterborne plastic coating additives should be selected by the first failed stage, not by the appearance of the final defect alone.<\/strong> Poor coverage may be a substrate-energy or contamination problem; pinholes may come from retained process air; uneven flow may reflect compatibility. For the documented Longchang routes, WD-D545 is the plastic-paint-specific wetting option, DF-D9904BR is the waterborne high-shear defoamer option, and 3467 is the compatibility-focused surface-control option.<\/p>\n

None of these products creates adhesion to untreated polypropylene or polyethylene by itself. Resin choice, plastic grade, mold-release contamination, cleaning, pretreatment, film build, flash, and cure remain part of the coating system. Approve an additive only when it solves the target failure without reducing adhesion, appearance, recoat, water resistance, or storage stability.<\/p>\n

Waterborne plastic coating decision map<\/h2>\n
\n\n\n\n\n\n\n\n\n
Observed evidence<\/th>\nFirst controlled check<\/th>\nProduct route if confirmed<\/th>\n<\/tr>\n<\/thead>\n
Film beads, retracts, or leaves low-coverage areas immediately after application<\/td>\nVerify plastic grade, surface treatment, cleanliness, and wetting<\/td>\nWD-D545<\/td>\n<\/tr>\n
Batch retains microfoam after dispersion, pumping, or spray circulation<\/td>\nStandardize shear and measure foam generation\/decay<\/td>\nDF-D9904BR at grind or validated high-shear stage<\/td>\n<\/tr>\n
Substrate wets, but film flow or resin compatibility remains uneven<\/td>\nRun a low-dose compatibility ladder and recoat check<\/td>\n3467<\/td>\n<\/tr>\n
Failure follows one mold, cleaning lot, or pretreatment level<\/td>\nCorrect contamination or surface preparation first<\/td>\nNo additive escalation until the cause is controlled<\/td>\n<\/tr>\n<\/tbody>\n<\/table>
Original plastic-coating process map: separate substrate entry, entrained air, and surface compatibility before screening an additive.<\/figcaption><\/figure>\n\n\n\n\n\n\n\n
Product<\/th>\nPublished fit<\/th>\nSupplier starting guidance<\/th>\nBoundary to protect<\/th>\n<\/tr>\n<\/thead>\n
CHLUMICRYL\u00ae WD-D545<\/strong><\/a><\/td>\nWaterborne wood, industrial, and plastic paints; substrate wetting and spreading<\/td>\n0.1\u20130.5% of total formulation; any production stage, including post-addition<\/td>\nPublished defoaming rating is zero; do not treat it as an air-release solution<\/td>\n<\/tr>\n
CHLUMICRYL\u00ae DF-D9904BR<\/strong><\/a><\/td>\nWater-based, silica-free defoamer; 30% active<\/td>\n0.1\u20131.0%; pre-combine with co-solvent, then disperse under high shear<\/td>\nNot a universal late post-addition rescue<\/td>\n<\/tr>\n
CHLUMIAG\u00ae 3467<\/strong><\/a><\/td>\nWater, solvent, and UV systems; compatibility-prioritized surface control<\/td>\nPublished waterborne guidance is 0.5\u20135% of total formulation<\/td>\nUse a compact ladder; verify adhesion and recoat at every level<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Control the plastic surface before formulation changes<\/h2>\n

Record polymer family and grade, recycled content, filler, mold-release agent, cleaning chemistry, handling, surface treatment, and time from treatment to coating. Compare a known-good panel with the failing production part. A wetting additive can improve spreading, but it cannot remove silicone oil, restore decayed treatment, or compensate for an incompatible binder.<\/p>\n

Use the same part geometry when possible. Flat laboratory panels may hide edge pullback, recess pooling, spray shadowing, and heat history that appear on molded parts.<\/p>\n

Use WD-D545 for a confirmed wetting failure<\/h2>\n

WD-D545 is the most direct first screen when a clean, correctly treated plastic still shows incomplete wetting. Its public page specifically lists waterborne plastic paint, gives 0.1\u20130.5% total-formula guidance, and allows incorporation at any production stage. Start near the low end and compare against a blank under fixed application conditions.<\/p>\n

Measure wet-film continuity, craters, edge coverage, leveling, sag, gloss, haze, and adhesion after full cure. If the coating wets but later delaminates, return to binder, pretreatment, cure, and contamination rather than increasing wetting additive automatically.<\/p>\n

Use DF-D9904BR for retained process air<\/h2>\n

Choose DF-D9904BR when the evidence follows grinding, letdown, pumping, recirculation, or atomization. The product page requires high-shear incorporation and recommends adding it to co-solvent before the abrasive\/grind phase. Prepare a correctly incorporated control instead of judging it from a late addition to a finished batch.<\/p>\n

Record foam height and decay, wet-film bubbles, cured pinholes, density or entrained-air indication, and appearance. Excess defoamer or poor compatibility may produce craters, haze, gloss loss, or adhesion changes, so the lowest passing level is usually the better candidate.<\/p>\n

Use 3467 only for compatibility and flow<\/h2>\n

Screen 3467 when the substrate is already wetted and the remaining problem is film uniformity or compatibility. Its public page covers waterborne systems and emphasizes compatibility over feel. Because the published waterborne range is broad, use a small internally justified ladder rather than treating the upper figure as a default.<\/p>\n

Do not mix it casually with other additives: the page lists an avoid-mixing precaution. Test it alone first, then evaluate any required combination in the exact order of addition.<\/p>\n

Build a substrate-specific trial<\/h2>\n
    \n
  1. Lock the substrate.<\/strong> Use the same polymer grade, pretreatment, cleaning, age, and geometry.<\/li>\n
  2. Lock manufacture.<\/strong> Hold addition order, shear, temperature, pH, solids, and hold time.<\/li>\n
  3. Lock application.<\/strong> Hold viscosity, atomization or drawdown, wet-film build, flash, and cure.<\/li>\n
  4. Compare one mechanism.<\/strong> Run a blank plus a short supplier-supported ladder for only the relevant route.<\/li>\n
  5. Age the panels.<\/strong> Repeat adhesion and appearance after cure, water exposure, and the customer\u2019s recoat window.<\/li>\n<\/ol>\n

    Measure adhesion and water resistance with appearance<\/h2>\n

    ASTM D823<\/a> describes practices for producing uniform coating films on test panels. ASTM D870<\/a> covers controlled water-immersion resistance and cautions against equating laboratory duration directly with natural exposure. For plastic-specific tape testing, ASTM F1842<\/a> adapts tape adhesion for membrane-switch plastic substrates; confirm whether it fits the actual part and specification.<\/p>\n

    Approve against the customer\u2019s required plastic, pretreatment, cure, film thickness, adhesion method, water or chemical exposure, gloss, color, haze, flexibility, recoat, blocking, and storage window. A smooth panel that fails aged adhesion is not a passing formulation.<\/p>\n

    Common selection errors<\/h2>\n

    Using a feel additive as the default third route<\/h3>\n

    CHLUMIFE\u00ae 3166 is not a first-choice route here: its product page warns of pinholes, whitening, and foam stabilization. Surface feel should be optimized only after wetting, air release, adhesion, and recoat are secure.<\/p>\n

    Calling every hole a wetting defect<\/h3>\n

    Map defect timing and location. Immediate retraction suggests wetting or contamination; bubbles emerging during flash or cure point toward entrained air, outgassing, or process conditions.<\/p>\n

    Approving only fresh adhesion<\/h3>\n

    Plastic coatings can change after water exposure, thermal cycling, or time. Include the customer\u2019s aged condition and inspect whether failure occurs at the plastic\/coating interface or between coats.<\/p>\n

    Related application guides<\/h2>\n

    Use the broader plastic coating guide<\/a> for cross-technology selection, the pinhole diagnostic guide<\/a> for bubble and outgassing separation, or the wetting additive guide<\/a> when substrate entry is the confirmed failure.<\/p>\n

    Request a waterborne plastic coating shortlist<\/h2>\n

    Send the plastic family and grade, molded-part geometry, cleaning and pretreatment, resin, pigments\/fillers, pH and solids, current additives, manufacture shear, application method, film build, flash\/cure, defect photos, and adhesion\/recoat requirements. Ask Longchang Chemical to compare WD-D545, DF-D9904BR, or 3467<\/strong><\/a>.<\/p>","protected":false},"excerpt":{"rendered":"

    A practical CHLUMICRYL\u00ae buyer guide for waterborne plastic coatings that separates difficult-substrate wetting, water-based microbubble control, and final-surface feel or scratch-balance work.<\/p>","protected":false},"author":6,"featured_media":10828,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-10827","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized"],"yoast_head":"\nWaterborne Plastic Coating Additives: Wetting & Foam<\/title>\n<meta name=\"description\" content=\"Choose waterborne plastic coating additives for substrate wetting, process microfoam or surface compatibility. Compare WD-D545, DF-D9904BR and 3467 safely.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/longchangchemical.com\/nl\/waterborne-plastic-coating-additives\/\" \/>\n<meta property=\"og:locale\" content=\"nl_NL\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Waterborne Plastic Coating Additives: Wetting & Foam\" \/>\n<meta property=\"og:description\" content=\"Choose waterborne plastic coating additives for substrate wetting, process microfoam or surface compatibility. Compare WD-D545, DF-D9904BR and 3467 safely.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/longchangchemical.com\/nl\/waterborne-plastic-coating-additives\/\" \/>\n<meta property=\"og:site_name\" content=\"Longchang Chemical\" \/>\n<meta property=\"article:published_time\" content=\"2026-07-24T00:00:46+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-08-08T07:15:05+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-plastic-coating-additives-hero.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1280\" \/>\n\t<meta property=\"og:image:height\" content=\"720\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"marketing@longchang Group\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/\"},\"author\":{\"name\":\"marketing@longchang Group\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5\"},\"headline\":\"Waterborne Plastic Coating Additives: Wetting & Foam\",\"datePublished\":\"2026-07-24T00:00:46+00:00\",\"dateModified\":\"2026-08-08T07:15:05+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/\"},\"wordCount\":1040,\"publisher\":{\"@id\":\"https:\/\/longchangchemical.com\/#organization\"},\"image\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-plastic-coating-additives-hero.jpg\",\"articleSection\":[\"Uncategorized\"],\"inLanguage\":\"nl-NL\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/\",\"url\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/\",\"name\":\"Waterborne Plastic Coating Additives: Wetting & Foam\",\"isPartOf\":{\"@id\":\"https:\/\/longchangchemical.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-plastic-coating-additives-hero.jpg\",\"datePublished\":\"2026-07-24T00:00:46+00:00\",\"dateModified\":\"2026-08-08T07:15:05+00:00\",\"description\":\"Choose waterborne plastic coating additives for substrate wetting, process microfoam or surface compatibility. Compare WD-D545, DF-D9904BR and 3467 safely.\",\"breadcrumb\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#breadcrumb\"},\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#primaryimage\",\"url\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-plastic-coating-additives-hero.jpg\",\"contentUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-plastic-coating-additives-hero.jpg\",\"width\":1280,\"height\":720},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/longchangchemical.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Waterborne Plastic Coating Additives: Wetting & Foam\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/longchangchemical.com\/#website\",\"url\":\"https:\/\/longchangchemical.com\/\",\"name\":\"Longchang Chemical\",\"description\":\"China chemical manufacturer \uff06 supplier\",\"publisher\":{\"@id\":\"https:\/\/longchangchemical.com\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/longchangchemical.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"nl-NL\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/longchangchemical.com\/#organization\",\"name\":\"Longchang Chemical\",\"url\":\"https:\/\/longchangchemical.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png\",\"contentUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png\",\"width\":512,\"height\":512,\"caption\":\"Longchang Chemical\"},\"image\":{\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5\",\"name\":\"marketing@longchang Group\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g\",\"caption\":\"marketing@longchang Group\"},\"url\":\"https:\/\/longchangchemical.com\/nl\/author\/marketinglongchang-group\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Waterborne Plastic Coating Additives: Wetting & Foam","description":"Choose waterborne plastic coating additives for substrate wetting, process microfoam or surface compatibility. Compare WD-D545, DF-D9904BR and 3467 safely.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/longchangchemical.com\/nl\/waterborne-plastic-coating-additives\/","og_locale":"nl_NL","og_type":"article","og_title":"Waterborne Plastic Coating Additives: Wetting & Foam","og_description":"Choose waterborne plastic coating additives for substrate wetting, process microfoam or surface compatibility. Compare WD-D545, DF-D9904BR and 3467 safely.","og_url":"https:\/\/longchangchemical.com\/nl\/waterborne-plastic-coating-additives\/","og_site_name":"Longchang Chemical","article_published_time":"2026-07-24T00:00:46+00:00","article_modified_time":"2026-08-08T07:15:05+00:00","og_image":[{"width":1280,"height":720,"url":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-plastic-coating-additives-hero.jpg","type":"image\/jpeg"}],"author":"marketing@longchang Group","twitter_card":"summary_large_image","schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#article","isPartOf":{"@id":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/"},"author":{"name":"marketing@longchang Group","@id":"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5"},"headline":"Waterborne Plastic Coating Additives: Wetting & Foam","datePublished":"2026-07-24T00:00:46+00:00","dateModified":"2026-08-08T07:15:05+00:00","mainEntityOfPage":{"@id":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/"},"wordCount":1040,"publisher":{"@id":"https:\/\/longchangchemical.com\/#organization"},"image":{"@id":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#primaryimage"},"thumbnailUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-plastic-coating-additives-hero.jpg","articleSection":["Uncategorized"],"inLanguage":"nl-NL"},{"@type":"WebPage","@id":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/","url":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/","name":"Waterborne Plastic Coating Additives: Wetting & Foam","isPartOf":{"@id":"https:\/\/longchangchemical.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#primaryimage"},"image":{"@id":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#primaryimage"},"thumbnailUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-plastic-coating-additives-hero.jpg","datePublished":"2026-07-24T00:00:46+00:00","dateModified":"2026-08-08T07:15:05+00:00","description":"Choose waterborne plastic coating additives for substrate wetting, process microfoam or surface compatibility. Compare WD-D545, DF-D9904BR and 3467 safely.","breadcrumb":{"@id":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#breadcrumb"},"inLanguage":"nl-NL","potentialAction":[{"@type":"ReadAction","target":["https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/"]}]},{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#primaryimage","url":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-plastic-coating-additives-hero.jpg","contentUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-plastic-coating-additives-hero.jpg","width":1280,"height":720},{"@type":"BreadcrumbList","@id":"https:\/\/longchangchemical.com\/waterborne-plastic-coating-additives\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/longchangchemical.com\/"},{"@type":"ListItem","position":2,"name":"Waterborne Plastic Coating Additives: Wetting & Foam"}]},{"@type":"WebSite","@id":"https:\/\/longchangchemical.com\/#website","url":"https:\/\/longchangchemical.com\/","name":"Chemisch bedrijf Longchang","description":"China chemische fabrikant \uff06 leverancier","publisher":{"@id":"https:\/\/longchangchemical.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/longchangchemical.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"nl-NL"},{"@type":"Organization","@id":"https:\/\/longchangchemical.com\/#organization","name":"Chemisch bedrijf Longchang","url":"https:\/\/longchangchemical.com\/","logo":{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/","url":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png","contentUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png","width":512,"height":512,"caption":"Longchang Chemical"},"image":{"@id":"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5","name":"marketing@longchang Groep","image":{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/longchangchemical.com\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g","caption":"marketing@longchang Group"},"url":"https:\/\/longchangchemical.com\/nl\/author\/marketinglongchang-group\/"}]}},"_links":{"self":[{"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/posts\/10827","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/comments?post=10827"}],"version-history":[{"count":3,"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/posts\/10827\/revisions"}],"predecessor-version":[{"id":11145,"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/posts\/10827\/revisions\/11145"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/media\/10828"}],"wp:attachment":[{"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/media?parent=10827"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/categories?post=10827"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/longchangchemical.com\/nl\/wp-json\/wp\/v2\/tags?post=10827"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}