Fotoiniziatore 6993 CAS 71449-78-0

6993 is a cationic photoinitiator,The triarylsulfonium salt photoinitiator has high photoinitiation activity because the sulfur atom can be partially conjugated with three aromatic rings, and the positive charge is dispersed. After light excitation, it can undergo cleavage to produce polymerization active species; it has good absorption at 365nm; It has the characteristics of fast curing speed, good surface drying, no yellowing, no migration, and no smell.

Descrizione

Fotoiniziatore 6993

Sinonimo:UV Cationic Photoinitiator 6993;UVI-6993;UVI-6976 powder; Mixed type triarylsulfonium hexafluoroantimonate salts

CAS NO:71449-78-0

Standard: standard

Aspetto Polvere bianco sporco
Contenuto solido 99% min
Peso a secco 1% max


Spettro di assorbimento UV :

Applicazioni:

1. Photoinitiator 6993: This photoinitiator excels at curing alicyclic epoxy resins such as Sinepoxy CER-421 and Sinepoxy CER-4299. It is perfectly matched to these alicyclic epoxy resins and enables efficient curing processes. In addition, it also has excellent curing effects on vinyl ethers and other cationic curing materials. From a historical perspective, the emergence and application of photoinitiators was a major innovation in material curing technology. In the past, the curing process of many materials was cumbersome and time-consuming, but the advent of photoinitiators greatly shortened this process, improved production efficiency, and promoted the rapid development of related industries.

2. A deeper analysis shows that in the application scenario of transparent coatings, the content of photoinitiator 6993 in the starting formulation is extremely critical. Its content is specified in the range of 1.5-3.0% (by weight). This figure was not set arbitrarily, but was determined through extensive experimentation and practical application. For example, in the early stages of product development, the content of photoinitiator 6993 was increased to 5%, but this was found to have caused an imbalance in some of the coating’s properties, such as an increase in hardness and a significant decrease in toughness, making the coating more prone to cracking when impacted by external forces. Conversely, if the content is too low, for example below 1%, the curing effect is not good, and the desired coating strength and stability requirements cannot be met. Therefore, the content range of 1.5-3.0% is the optimal range obtained after comprehensive consideration of the various performance indicators of the coating, which can ensure that the transparent coating has a good curing effect while maintaining balanced physical properties.

3. Let’s explore a new hypothetical scenario. Suppose that in the future, a special project requires the use of materials with a transparent coating and photoinitiator 6993 curing in an extremely harsh environment, such as deep-sea high pressure, strong corrosion, or high radiation and temperature changes in space. Then, would the existing 1.5 – 3.0% photoinitiator 6993 content range still meet the requirements? This requires further research and adjustment. Perhaps in the deep-sea environment, due to the high pressure and high corrosiveness of the seawater, the content of photoinitiator 6993 needs to be appropriately increased to enhance the curing strength and corrosion resistance of the coating, but at the same time, other performance issues that may be caused by too high a content, such as the previously mentioned decrease in toughness, need to be considered. In the space environment, in the face of high radiation and drastic temperature changes, it may be necessary to develop a new formulation system that can ensure the effective curing of photoinitiator 6993 while adding some special radiation-resistant and temperature-regulating materials that work synergistically with the existing ingredients to meet the requirements for use in the space environment.

Pimballaggio e spedizione:

Imballaggio: da 25kgs a 200kgs/drum.

Consegna: in 5-7 giorni lavorativi.

Stoccaggio:

Conservare in un luogo fresco e asciutto, al riparo dalla luce solare diretta.

Contattateci ora!

Se avete bisogno di Price, inserite i vostri dati di contatto nel modulo sottostante; di solito vi contatteremo entro 24 ore. Potete anche inviarmi un'e-mail sale01@longchangchemical.com durante l'orario di lavoro (dalle 8:30 alle 18:00 UTC+8 lun.-sab.) o utilizzare la live chat del sito web per ottenere una risposta immediata.

 

Fotoiniziatore TPO CAS 75980-60-8
Fotoiniziatore TMO CAS 270586-78-2
Fotoiniziatore PD-01 CAS 579-07-7
Fotoiniziatore PBZ CAS 2128-93-0
Fotoiniziatore OXE-02 CAS 478556-66-0
Fotoiniziatore OMBB CAS 606-28-0
Fotoiniziatore MPBZ (6012) CAS 86428-83-3
Fotoiniziatore MBP CAS 134-84-9
Fotoiniziatore MBF CAS 15206-55-0
Fotoiniziatore LAP CAS 85073-19-4
Fotoiniziatore ITX CAS 5495-84-1
Fotoiniziatore EMK CAS 90-93-7
Fotoiniziatore EHA CAS 21245-02-3
Fotoiniziatore EDB CAS 10287-53-3
Fotoiniziatore DETX CAS 82799-44-8
Fotoiniziatore CQ / Canforchinone CAS 10373-78-1
Fotoiniziatore CBP CAS 134-85-0
Fotoiniziatore BP / Benzofenone CAS 119-61-9
Fotoiniziatore BMS CAS 83846-85-9
Fotoiniziatore 938 CAS 61358-25-6
Fotoiniziatore 937 CAS 71786-70-4
Fotoiniziatore 819 DW CAS 162881-26-7
Fotoiniziatore 819 CAS 162881-26-7
Fotoiniziatore 784 CAS 125051-32-3
Fotoiniziatore 754 CAS 211510-16-6 442536-99-4
Fotoiniziatore 6993 CAS 71449-78-0
Fotoiniziatore 6976 CAS 71449-78-0 89452-37-9 108-32-7
Fotoiniziatore 379 CAS 119344-86-4
Fotoiniziatore 369 CAS 119313-12-1
Fotoiniziatore 160 CAS 71868-15-0
Fotoiniziatore 1206
Fotoiniziatore 1173 CAS 7473-98-5

 

Informazioni aggiuntive

Nome chimico

4-Thiofenil fenil difenil solfonato di esafluoroantimonato di alluminio

Numero CAS

71449-78-0

Formula molecolare

C24H19S2.SbF6

Test

99% min

Pacchetto

25kgs/drum;200kgs/drum

Recensioni

Non ci sono ancora recensioni.

Recensisci per primo "Photoinitiator 6993 CAS 71449-78-0".

Contatto

Italian