{"id":10912,"date":"2026-07-28T00:00:51","date_gmt":"2026-07-28T00:00:51","guid":{"rendered":"https:\/\/longchangchemical.com\/?p=10912"},"modified":"2026-07-28T16:07:22","modified_gmt":"2026-07-28T16:07:22","slug":"waterborne-direct-to-metal-topcoat-additives","status":"publish","type":"post","link":"https:\/\/longchangchemical.com\/de\/waterborne-direct-to-metal-topcoat-additives\/","title":{"rendered":"How to Choose Additives for Waterborne Direct-to-Metal Topcoats"},"content":{"rendered":"<p><strong>Schnelle Antwort:<\/strong> K\u00e4ufer arbeiten an <strong>waterborne direct-to-metal topcoats<\/strong> usually get a cleaner first shortlist when they separate <strong>three different jobs<\/strong> instead of asking one additive to rescue every panel-finish problem at once. Start with <a href=\"https:\/\/longchangchemical.com\/de\/product\/chlumile3345-wetting-and-leveling-agent\/\"><strong>CHLUMILE\u00ae 3345<\/strong><\/a> when the topcoat still needs cleaner <strong>wetting, spreading, and leveling<\/strong> on the exposed metal finish. Move <a href=\"https:\/\/longchangchemical.com\/de\/product\/chlumiag-3501\/\"><strong>CHLUMIAG\u00ae 3501<\/strong><\/a> forward when the finish already forms directionally but still needs a better <strong>anti-sticking, release, or downstream handling route<\/strong>. Start with <a href=\"https:\/\/longchangchemical.com\/de\/product\/agesin-we-d9904br-defoamer\/\"><strong>CHLUMICRYL\u00ae DF-D9904BR<\/strong><\/a> when the real blocker is <strong>microbubbles, foam carry-through, or pinholes<\/strong> in the water-based topcoat film.<\/p>\n<p>This page stays inside the redirected <strong>CHLUMICRYL\u00ae Beschichtungs- und Druckfarbenadditive<\/strong> direction and does <strong>nicht<\/strong> fall back to the older photoinitiator cluster. It also is not a duplicate of Longchang\u2019s already-live <a href=\"https:\/\/longchangchemical.com\/de\/waterborne-topcoat-additives\/\">waterborne topcoat<\/a>, <a href=\"https:\/\/longchangchemical.com\/de\/waterborne-direct-to-metal-additives\/\">waterborne direct-to-metal coatings<\/a>, oder <a href=\"https:\/\/longchangchemical.com\/de\/waterborne-direct-to-metal-primer-additives\/\">waterborne direct-to-metal primer<\/a> pages. It answers a tighter B2B question: <strong>which additive deserves the first trial when a waterborne DTM topcoat still is not giving a clean final read on exposed metal panels?<\/strong><\/p>\n<h2>Why waterborne direct-to-metal topcoats deserve their own additive page<\/h2>\n<p>A <strong>waterborne direct-to-metal topcoat<\/strong> sits in a narrower buyer lane than either a general waterborne topcoat page or a broader direct-to-metal coatings page. At this stage the finish usually is being judged as an <strong>exposed final film<\/strong>, so the formulator is often balancing visible laydown, dried-surface handling, and trapped-air cleanup instead of only asking whether the coating reaches the metal at all.<\/p>\n<p>That creates a different first-screen question from a broad DTM article. In practical formulation work, the first additive decision often needs to separate a <strong>final-film wetting and leveling problem<\/strong> from a <strong>dried-surface anti-sticking and handling problem<\/strong>, and both from a true <strong>water-based microbubble and pinhole problem<\/strong>. Those are not the same first screen, even when the same metal panel trial shows all three symptoms.<\/p>\n<p>General industry framing supports that split conservatively. Waterborne DTM topcoat work is often judged by how evenly the exposed film lays down, whether finished panels still stick or mark during handling, and whether entrained air still distorts the final appearance. The product-specific facts below still stay tied to current Longchang-supported product pages.<\/p>\n<h2>What the current company-supported evidence actually separates<\/h2>\n<ul>\n<li><strong>CHLUMILE\u00ae 3345<\/strong> is supported by Longchang as an <strong>organosilicon leveling agent<\/strong> f\u00fcr <strong>UV<\/strong>, <strong>L\u00f6sungsmittel<\/strong>und <strong>wasserbasierte Systeme<\/strong>. The current company-supported route positions it around <strong>Benetzung<\/strong>, <strong>Nivellierung<\/strong>und <strong>Oberfl\u00e4chenspannungssteuerung<\/strong>, making it a practical first route when the topcoat still looks uneven, hesitant, or visually unsettled on metal. Existing Longchang buyer pages already use this route where the first need is visible laydown cleanup rather than anti-sticking or defoaming.<\/li>\n<li><strong>CHLUMIAG\u00ae 3501<\/strong> is the broader <strong>anti-sticking and handling route<\/strong>. Longchang directly lists it for <strong>Druckfarben<\/strong>, <strong>Tintenstrahltinten<\/strong>, <strong>Siebdruckfarben<\/strong>, <strong>\u00dcberdrucklacke<\/strong>, <strong>Trennbeschichtungen<\/strong>und <strong>anti-sticking-agent use<\/strong>. The current public page also supports use across <strong>UV<\/strong>, <strong>L\u00f6sungsmittel<\/strong>und <strong>wasserbasierte Systeme<\/strong>, and says it can be added at <strong>any stage<\/strong> oder sp\u00e4ter.<\/li>\n<li><strong>CHLUMICRYL\u00ae DF-D9904BR<\/strong> wird unterst\u00fctzt als <strong>polyether modified polysiloxane compound<\/strong>, <strong>silica-free<\/strong>, for <strong>wasserbasierte Systeme<\/strong>. Longchang directly positions it to <strong>prevent microbubbles and pinholes<\/strong> in the coating film of water-based coatings and inks. Supported dosage is <strong>0,1% bis 1,0%<\/strong>, and the product should be added under <strong>high shear<\/strong>, ideally after going into a co-solvent first.<\/li>\n<\/ul>\n<p>That is enough company-supported separation to build a real buyer page without inventing unsupported direct-to-metal topcoat claims. The aim is not to pretend one additive can solve every final-film complaint. The aim is to help the buyer choose the <strong>first better test route<\/strong>.<\/p>\n<h2>Kurzvergleichstabelle: Welche Route verdient den ersten Bildschirm?<\/h2>\n<table>\n<thead>\n<tr>\n<th>Buyer priority in waterborne DTM topcoats<\/th>\n<th>Beste erste Route<\/th>\n<th>Warum es an erster Stelle steht<\/th>\n<th>Hauptbeobachtungspunkt<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>The exposed metal topcoat still shows uneven laydown, poor surface calmness, or a visible leveling problem<\/td>\n<td><a href=\"https:\/\/longchangchemical.com\/de\/product\/chlumile3345-wetting-and-leveling-agent\/\">CHLUMILE\u00ae 3345<\/a><\/td>\n<td>The supported route is built around wetting and leveling, which fits a final-film appearance problem better than an anti-sticking or bubble-only route<\/td>\n<td>Use it when the real first problem is visible laydown, not when the dominant complaint is dried-surface handling or trapped air<\/td>\n<\/tr>\n<tr>\n<td>The finish already forms directionally, but dried panels still stick, block, or mark during stacking, touch, or downstream handling<\/td>\n<td><a href=\"https:\/\/longchangchemical.com\/de\/product\/chlumiag-3501\/\">CHLUMIAG\u00ae 3501<\/a><\/td>\n<td>Longchang directly supports it for anti-sticking use and broader downstream handling across coatings, inks, OPV, and release-oriented work<\/td>\n<td>Do not treat it as a substitute for true wetting-leveling rescue when the film still cannot settle visually<\/td>\n<\/tr>\n<tr>\n<td>The topcoat already reaches the panel, but trapped air still leaves microbubbles or pinholes in the final film<\/td>\n<td><a href=\"https:\/\/longchangchemical.com\/de\/product\/agesin-we-d9904br-defoamer\/\">CHLUMICRYL\u00ae DF-D9904BR<\/a><\/td>\n<td>Longchang directly positions it to prevent microbubbles and pinholes in water-based coating films<\/td>\n<td>It is not a casual late after-add, and the supported co-solvent plus high-shear route matters<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Wann CHLUMILE\u00ae 3345 der bessere erste Schritt ist<\/h2>\n<p><strong>3345<\/strong> should move first when the waterborne DTM topcoat still looks like a <strong>visible laydown problem<\/strong>. This is the stronger opening route when the topcoat hesitates, shows uneven surface calmness, or still needs a better wetting-leveling benchmark on exposed metal.<\/p>\n<p>That distinction matters because a topcoat often gets judged first by what the panel looks like after application, not only by whether it technically reaches the substrate. If the exposed film still is not laying down cleanly, it becomes harder to judge whether the next problem is really downstream handling or air release.<\/p>\n<ul>\n<li><strong>Optimale Nutzung auf dem ersten Bildschirm:<\/strong> final-film wetting, spreading, and leveling on exposed waterborne metal topcoats<\/li>\n<li><strong>Systempassform:<\/strong> the current company route supports UV, solvent, and water-based systems<\/li>\n<li><strong>Hauptst\u00e4rke:<\/strong> a practical first route when the buyer needs visible laydown cleanup rather than another anti-sticking or bubble-only screen<\/li>\n<li><strong>Wichtigste Vorsichtsma\u00dfnahme:<\/strong> use it when the real bottleneck is film appearance and surface calmness, not when the topcoat already looks acceptable and the complaint shows up only after drying or handling<\/li>\n<\/ul>\n<p>In short, 3345 is the better first move when the DTM topcoat still needs a cleaner <strong>appearance-led benchmark<\/strong> before the formulator decides whether the real problem is handling or trapped air.<\/p>\n<h2>When CHLUMIAG\u00ae 3501 is the better first move<\/h2>\n<p><strong>3501<\/strong> should move ahead first when the topcoat can already form a directionally acceptable film but still shows a <strong>dried-surface handling problem<\/strong>. This route is stronger when the issue is not basic wetting or leveling, but blocking, sticking, contact marking, or a need for broader release-oriented behavior after the metal panel leaves the wet stage.<\/p>\n<p>That matters in waterborne DTM topcoats because many metal finishes are handled, stacked, touched, or moved soon after drying, and those downstream steps can expose a different additive problem from the original laydown stage. Longchang\u2019s current public page is useful here because 3501 is not positioned only as a narrow coating additive. The supported route keeps together <strong>anti-sticking use<\/strong> with applicability across coatings, printing inks, inkjet inks, OPV, and release coatings, while staying open across <strong>UV<\/strong>, <strong>L\u00f6sungsmittel<\/strong>und <strong>wasserbasierte Systeme<\/strong>.<\/p>\n<ul>\n<li><strong>Optimale Nutzung auf dem ersten Bildschirm:<\/strong> anti-sticking, release, and downstream handling control after the film already forms<\/li>\n<li><strong>Systempassform:<\/strong> UV, solvent, and water-based systems on the current public page<\/li>\n<li><strong>Hauptst\u00e4rke:<\/strong> one route that already supports broader anti-sticking and handling logic across multiple coating and ink windows<\/li>\n<li><strong>Wichtigste Vorsichtsma\u00dfnahme:<\/strong> if the panel still has obvious wet-film laydown failure, 3501 should not be used to hide a problem that really belongs to the 3345 route first<\/li>\n<\/ul>\n<p>So 3501 is the better first move when the DTM topcoat still needs a <strong>handling-first cleanup route<\/strong> after the visible film already looks directionally close.<\/p>\n<h2>Wann ist CHLUMICRYL\u00ae DF-D9904BR der bessere erste Schritt?<\/h2>\n<p><strong>DF-D9904BR<\/strong> should move ahead first when the waterborne DTM topcoat is losing the fight to <strong>microbubbles, foam carry-through, or pinholes<\/strong>. In those cases, better wetting or better anti-sticking usually will not clean up the panel enough to judge the rest of the package honestly.<\/p>\n<p>Longchang\u2019s product page is direct here. DF-D9904BR is supported specifically to prevent <strong>microbubbles and pinholes<\/strong> in the coating film of water-based coatings and inks, and it carries a process note that matters commercially: the product should enter through a <strong>co-solvent step<\/strong> and be added under <strong>high shear<\/strong> rather than treated as a late shortcut.<\/p>\n<ul>\n<li><strong>Optimale Nutzung auf dem ersten Bildschirm:<\/strong> persistent microbubbles and pinholes in waterborne DTM topcoats<\/li>\n<li><strong>Dosierungshinweise:<\/strong> 0,1% bis 1,0% der Gesamtformulierung<\/li>\n<li><strong>Vorbereitungsregel:<\/strong> use the supported co-solvent-first, high-shear route<\/li>\n<li><strong>Main reason to shortlist it:<\/strong> it solves a different first problem from visible leveling rescue or dried-surface anti-sticking control<\/li>\n<\/ul>\n<p>This is the stronger first move when the visible topcoat defect is being limited by <strong>air management<\/strong>, not by a missing wetting-leveling route or a handling route.<\/p>\n<h2>Wie K\u00e4ufer vor der Anforderung von Mustern ausw\u00e4hlen sollten<\/h2>\n<h3>1. Start with the real first failure on the topcoat panel<\/h3>\n<p>If the exposed film still looks uneven or unsettled, start with 3345. If the topcoat looks directionally acceptable but still sticks or marks after drying, move 3501 forward. If trapped air still is corrupting the final film read, start with DF-D9904BR.<\/p>\n<h3>2. Keep visible laydown separate from downstream handling<\/h3>\n<p>A topcoat that will not settle visually on metal and a topcoat that looks acceptable but still blocks during handling are not the same additive problem. Separating those routes early usually makes the first trial set more honest.<\/p>\n<h3>3. Keep air-release control separate from both surface routes<\/h3>\n<p>Microbubble and pinhole control are not just smaller versions of wetting rescue or handling cleanup. If trapped air still sits in the topcoat film, it can distort how the team reads every later additive.<\/p>\n<h3>4. Respect the watchpoint, not only the headline benefit<\/h3>\n<p>3345 brings a cleaner laydown route. 3501 brings a broader anti-sticking and downstream handling route. DF-D9904BR brings direct water-based microbubble control. Those practical differences usually decide the better first route more than the additive family name alone.<\/p>\n<h3>5. Keep the first trial set small<\/h3>\n<p>For most waterborne DTM topcoat buyers, one <strong>3345 laydown route<\/strong>, eins <strong>3501 handling route<\/strong>und eins <strong>DF-D9904BR bubble-control route<\/strong> teach more than an overloaded first panel with too many partially overlapping additives.<\/p>\n<h2>Empfohlene Route nach Longchang von dieser Seite<\/h2>\n<ul>\n<li><strong>Laydown route:<\/strong> <a href=\"https:\/\/longchangchemical.com\/de\/product\/chlumile3345-wetting-and-leveling-agent\/\">CHLUMILE\u00ae 3345<\/a><\/li>\n<li><strong>Handling route:<\/strong> <a href=\"https:\/\/longchangchemical.com\/de\/product\/chlumiag-3501\/\">CHLUMIAG\u00ae 3501<\/a><\/li>\n<li><strong>Bubble-control route:<\/strong> <a href=\"https:\/\/longchangchemical.com\/de\/product\/agesin-we-d9904br-defoamer\/\">CHLUMICRYL\u00ae DF-D9904BR<\/a><\/li>\n<li><strong>Cluster\u00fcbersicht:<\/strong> <a href=\"https:\/\/longchangchemical.com\/de\/chlumicryl-coating-ink-additives\/\">CHLUMICRYL\u00ae Beschichtungs- und Druckfarbenadditive<\/a><\/li>\n<li><strong>Related stage page:<\/strong> <a href=\"https:\/\/longchangchemical.com\/de\/waterborne-topcoat-additives\/\">How to Choose Additives for Waterborne Topcoats<\/a><\/li>\n<li><strong>Related substrate page:<\/strong> <a href=\"https:\/\/longchangchemical.com\/de\/waterborne-direct-to-metal-additives\/\">How to Choose Additives for Waterborne Direct-to-Metal Coatings<\/a><\/li>\n<li><strong>Related stage page:<\/strong> <a href=\"https:\/\/longchangchemical.com\/de\/waterborne-direct-to-metal-primer-additives\/\">How to Choose Additives for Waterborne Direct-to-Metal Primers<\/a><\/li>\n<li><strong>Zugeh\u00f6rige Fehlerseite:<\/strong> <a href=\"https:\/\/longchangchemical.com\/de\/coating-fisheye-additive-selection\/\">How to Choose Additives for Coating Fisheyes<\/a><\/li>\n<li><strong>Zugeh\u00f6rige Fehlerseite:<\/strong> <a href=\"https:\/\/longchangchemical.com\/de\/coating-pinhole-additive-selection\/\">How to Choose Additives for Coating Pinholes<\/a><\/li>\n<\/ul>\n<h2>FAQ<\/h2>\n<h3>Which additive should I screen first if a waterborne DTM topcoat still looks uneven on metal?<\/h3>\n<p>Usually 3345, because the supported route is built around wetting and leveling, which match a visible topcoat laydown problem more directly than a handling or bubble-only route.<\/p>\n<h3>When should 3501 move ahead of 3345?<\/h3>\n<p>3501 should move ahead when the topcoat already forms directionally but dried panels still stick, block, or mark during handling, stacking, or downstream contact.<\/p>\n<h3>When does DF-D9904BR make more sense than the other two?<\/h3>\n<p>It makes more sense when microbubbles, foam carry-through, or pinholes still dominate the visible defect pattern and the process can follow the recommended co-solvent-first, high-shear incorporation route.<\/p>\n<h3>Is this page the same as the broader waterborne direct-to-metal coatings page?<\/h3>\n<p>No. The broader DTM page still answers the substrate-level selection question first. This new page is narrower and helps topcoat-stage buyers decide whether the first problem is visible laydown, dried-surface handling, or water-based trapped-air cleanup.<\/p>\n<h2>N\u00e4chster Schritt<\/h2>\n<p>If your waterborne direct-to-metal topcoat project is stuck between <strong>uneven visible laydown<\/strong>, <strong>dried-surface handling pressure<\/strong>und <strong>microbubble carry-through<\/strong>, stop treating them as the same additive request. Start with the real bottleneck first. That usually makes the next CHLUMICRYL\u00ae sample decision faster and more commercially useful.<\/p>","protected":false},"excerpt":{"rendered":"<p>A practical CHLUMICRYL\u00ae buyer-selection page for waterborne direct-to-metal topcoats, separating final-film wetting and leveling, anti-sticking handling control, and water-based microbubble cleanup on exposed metal finishes.<\/p>","protected":false},"author":6,"featured_media":10913,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-10912","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v25.3.1 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Waterborne Direct-to-Metal Topcoat Additives | Leveling, Anti-Sticking, Bubble Control<\/title>\n<meta name=\"description\" content=\"Choose additives for waterborne direct-to-metal topcoats by separating final-film wetting and leveling, anti-sticking handling control, and water-based microbubble cleanup.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/longchangchemical.com\/de\/waterborne-direct-to-metal-topcoat-additives\/\" \/>\n<meta property=\"og:locale\" content=\"de_DE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Waterborne Direct-to-Metal Topcoat Additives | Leveling, Anti-Sticking, Bubble Control\" \/>\n<meta property=\"og:description\" content=\"Choose additives for waterborne direct-to-metal topcoats by separating final-film wetting and leveling, anti-sticking handling control, and water-based microbubble cleanup.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/longchangchemical.com\/de\/waterborne-direct-to-metal-topcoat-additives\/\" \/>\n<meta property=\"og:site_name\" content=\"Longchang Chemical\" \/>\n<meta property=\"article:published_time\" content=\"2026-07-28T00:00:51+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-28T16:07:22+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-direct-to-metal-topcoat-additives-hero.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1024\" \/>\n\t<meta property=\"og:image:height\" content=\"576\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"marketing@longchang Group\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/\"},\"author\":{\"name\":\"marketing@longchang Group\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5\"},\"headline\":\"How to Choose Additives for Waterborne Direct-to-Metal Topcoats\",\"datePublished\":\"2026-07-28T00:00:51+00:00\",\"dateModified\":\"2026-07-28T16:07:22+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/\"},\"wordCount\":1892,\"publisher\":{\"@id\":\"https:\/\/longchangchemical.com\/#organization\"},\"image\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-direct-to-metal-topcoat-additives-hero.jpg\",\"articleSection\":[\"Uncategorized\"],\"inLanguage\":\"de\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/\",\"url\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/\",\"name\":\"Waterborne Direct-to-Metal Topcoat Additives | Leveling, Anti-Sticking, Bubble Control\",\"isPartOf\":{\"@id\":\"https:\/\/longchangchemical.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-direct-to-metal-topcoat-additives-hero.jpg\",\"datePublished\":\"2026-07-28T00:00:51+00:00\",\"dateModified\":\"2026-07-28T16:07:22+00:00\",\"description\":\"Choose additives for waterborne direct-to-metal topcoats by separating final-film wetting and leveling, anti-sticking handling control, and water-based microbubble cleanup.\",\"breadcrumb\":{\"@id\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#breadcrumb\"},\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#primaryimage\",\"url\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-direct-to-metal-topcoat-additives-hero.jpg\",\"contentUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-direct-to-metal-topcoat-additives-hero.jpg\",\"width\":1024,\"height\":576},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/longchangchemical.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Choose Additives for Waterborne Direct-to-Metal Topcoats\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/longchangchemical.com\/#website\",\"url\":\"https:\/\/longchangchemical.com\/\",\"name\":\"Longchang Chemical\",\"description\":\"China chemical manufacturer \uff06 supplier\",\"publisher\":{\"@id\":\"https:\/\/longchangchemical.com\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/longchangchemical.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"de\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/longchangchemical.com\/#organization\",\"name\":\"Longchang Chemical\",\"url\":\"https:\/\/longchangchemical.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png\",\"contentUrl\":\"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png\",\"width\":512,\"height\":512,\"caption\":\"Longchang Chemical\"},\"image\":{\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5\",\"name\":\"marketing@longchang Group\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\/\/longchangchemical.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g\",\"caption\":\"marketing@longchang Group\"},\"url\":\"https:\/\/longchangchemical.com\/de\/author\/marketinglongchang-group\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Waterborne Direct-to-Metal Topcoat Additives | Leveling, Anti-Sticking, Bubble Control","description":"Choose additives for waterborne direct-to-metal topcoats by separating final-film wetting and leveling, anti-sticking handling control, and water-based microbubble cleanup.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/longchangchemical.com\/de\/waterborne-direct-to-metal-topcoat-additives\/","og_locale":"de_DE","og_type":"article","og_title":"Waterborne Direct-to-Metal Topcoat Additives | Leveling, Anti-Sticking, Bubble Control","og_description":"Choose additives for waterborne direct-to-metal topcoats by separating final-film wetting and leveling, anti-sticking handling control, and water-based microbubble cleanup.","og_url":"https:\/\/longchangchemical.com\/de\/waterborne-direct-to-metal-topcoat-additives\/","og_site_name":"Longchang Chemical","article_published_time":"2026-07-28T00:00:51+00:00","article_modified_time":"2026-07-28T16:07:22+00:00","og_image":[{"width":1024,"height":576,"url":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-direct-to-metal-topcoat-additives-hero.jpg","type":"image\/jpeg"}],"author":"marketing@longchang Group","twitter_card":"summary_large_image","schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#article","isPartOf":{"@id":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/"},"author":{"name":"marketing@longchang Group","@id":"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5"},"headline":"How to Choose Additives for Waterborne Direct-to-Metal Topcoats","datePublished":"2026-07-28T00:00:51+00:00","dateModified":"2026-07-28T16:07:22+00:00","mainEntityOfPage":{"@id":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/"},"wordCount":1892,"publisher":{"@id":"https:\/\/longchangchemical.com\/#organization"},"image":{"@id":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#primaryimage"},"thumbnailUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-direct-to-metal-topcoat-additives-hero.jpg","articleSection":["Uncategorized"],"inLanguage":"de"},{"@type":"WebPage","@id":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/","url":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/","name":"Waterborne Direct-to-Metal Topcoat Additives | Leveling, Anti-Sticking, Bubble Control","isPartOf":{"@id":"https:\/\/longchangchemical.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#primaryimage"},"image":{"@id":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#primaryimage"},"thumbnailUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-direct-to-metal-topcoat-additives-hero.jpg","datePublished":"2026-07-28T00:00:51+00:00","dateModified":"2026-07-28T16:07:22+00:00","description":"Choose additives for waterborne direct-to-metal topcoats by separating final-film wetting and leveling, anti-sticking handling control, and water-based microbubble cleanup.","breadcrumb":{"@id":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#breadcrumb"},"inLanguage":"de","potentialAction":[{"@type":"ReadAction","target":["https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/"]}]},{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#primaryimage","url":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-direct-to-metal-topcoat-additives-hero.jpg","contentUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2026\/07\/waterborne-direct-to-metal-topcoat-additives-hero.jpg","width":1024,"height":576},{"@type":"BreadcrumbList","@id":"https:\/\/longchangchemical.com\/waterborne-direct-to-metal-topcoat-additives\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/longchangchemical.com\/"},{"@type":"ListItem","position":2,"name":"How to Choose Additives for Waterborne Direct-to-Metal Topcoats"}]},{"@type":"WebSite","@id":"https:\/\/longchangchemical.com\/#website","url":"https:\/\/longchangchemical.com\/","name":"Longchang Chemical","description":"China Hersteller von Chemikalien \uff06 Lieferant","publisher":{"@id":"https:\/\/longchangchemical.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/longchangchemical.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"de"},{"@type":"Organization","@id":"https:\/\/longchangchemical.com\/#organization","name":"Longchang Chemical","url":"https:\/\/longchangchemical.com\/","logo":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/","url":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png","contentUrl":"https:\/\/longchangchemical.com\/wp-content\/uploads\/2020\/08\/cropped-longchang-logo.png","width":512,"height":512,"caption":"Longchang Chemical"},"image":{"@id":"https:\/\/longchangchemical.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/longchangchemical.com\/#\/schema\/person\/03647a4ce07fdc0e453f27a2b96ccce5","name":"marketing@longchang-Gruppe","image":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/longchangchemical.com\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/a6a906641262cdfd34e337a3fa18594a?s=96&d=mm&r=g","caption":"marketing@longchang Group"},"url":"https:\/\/longchangchemical.com\/de\/author\/marketinglongchang-group\/"}]}},"_links":{"self":[{"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/posts\/10912","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/comments?post=10912"}],"version-history":[{"count":2,"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/posts\/10912\/revisions"}],"predecessor-version":[{"id":10915,"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/posts\/10912\/revisions\/10915"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/media\/10913"}],"wp:attachment":[{"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/media?parent=10912"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/categories?post=10912"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/longchangchemical.com\/de\/wp-json\/wp\/v2\/tags?post=10912"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}